CEJN quick couplings
Diameter: 50 mm - 200 mm
Operating pressure: 16 bar
Fittings with integrated anchoring socket for PE 80/ PE 100 pipes. Features Quick: Time saving up to 70%. No abrasion of the oxide film. No time for welding and cooling. Economical: no welding unit. ...
Frischhut
Diameter: 80 mm - 200 mm
Operating pressure: 16 bar
GPE-i for connection to the VRS®-T sockets Features All materials with drinking water approval Easy assembling due to low axial force at VRST connection PE 100 for welding, push-fit or clamp-connection
Frischhut
Diameter: 50 mm - 150 mm
Flanged fitting with integrated anchoring socket for PE 80/PE 100 pipes. Features Quick: Time saving up to 70%. No abrasion of the oxide film. No time for welding and cooling. Economical: no welding ...
Frischhut
Operating pressure: 3,000 bar
... experience in the industry of very high pressure, Multi-Coupling System® can supply the correct product according to the needs of the customer. The distribution schedule includes very high pressure quick ...
Diameter: 20 mm - 315 mm
Operating pressure: 10, 16 bar
Electrofusion fittings by Unidelta are used for connecting polyethylene pipes for conveying gas up to a pressure of 10 bar (There may be different regulations relating to use in the UK, please check prior to instillation) or drinking ...
Unidelta S.p.A.
Diameter: 3 mm - 14 mm
Operating pressure: 0.5 bar - 12 bar
Series of push-in fittings with reduced dimensions and new collet and release collar. They are for connecting nylon and polyurethane tubes. Available in various configurations (studs, elbows, T, Y) and with threads Gas pre-tefloned taper ...
Diameter: 2.5 mm - 15 mm
Operating pressure: 0.5 bar - 12 bar
Series of rapid fittings for connecting nylon and polyurethane tubes. They should be used in all those applications where a safer tube-fitting connection is required. Available in various configurations (studs, elbows, T) and with threads ...
... before the coupling process. The inclusion bodies of both coupling elements must be guided approximately 2 mm before the contact of the flat face sealing, without passing the radial position tolerance. When ...
MECHANISM / NIPPLE, ND 6/10 UP TO 250 BAR These coupling elements can only be mechanically coupled and are used to transfer liquid and gaseous media. - Pressurized and depressurized connectable - Suitable for fluids ...
Diameter: 16 mm - 50 mm
AR nickel plated brass female thread quick lock fitting IP67 Material Metal Rubber Material quality Brass Model Plug-in Surface protection Nickel-plated Separable Surface polished Two piece
Teaflex S.p.a
Diameter: 10 mm - 100 mm
Our Threaded Fittings & Fixings For Adjustable Feet are manufactured using a premium selection of materials, each one providing excellent resistance against rust and other general factors. Being tested and tried for use with all kinds ...
Diameter: 3 mm - 14 mm
Operating pressure: 20 bar
The MA is our “Automatic push-in fitting” line. It enables quick connections with calibrated plastic hoses at any time, at any stage of the pneumatic circuit and by a simple hand movement. The connection and the fitting ...
C.Matic S.p.A.
Diameter: 6 mm - 18 mm
Operating pressure: 0 bar - 16 bar
The MT is the new push-in fittings line that has been developed and designed to ensure high reliability and safety in the pneumatic braking systems on commercial and industrial vehicles. The push-in fittings of the MT Line are completely ...
C.Matic S.p.A.
Diameter: 0.156 in - 0.75 in
Operating pressure: 290 psi
Push in fittings for Vehicles applications complying with DOT FMVSS §571.106, SAE J2494-3 e SAE J1131 specs. 1-2 > Body and Release Ring: Brass UNI EN 12164 CW614N - UNI EN 12165 CW617N Nickel Plated 3 > Holding Ring: Resin (PEI) 4 ...
C.Matic S.p.A.
Diameter: 11 mm
The system variacor®, patented internationally, allows, with these two joint-turning, to make flexible and directional all the rigid and semi-rigid pipes, whatever is their natures and applications. Cost saving : no more premature ...
Diameter: 25 mm - 65 mm
Operating pressure: 20, 40 bar
Make your fire interventions more comfortable , your progress on ground more efficient ... Increases pliability of fire hose, less effort due to hose rigidity, Makes easier using fire hose in hard to access area, Reduces step ...
Diameter: 25 mm - 65 mm
Operating pressure: 25, 40 bar
Passage of water, hydrocarbons, food liquids, in pressure or in vacum, very numerous uses for joins DynaVariacor® which return flexible and dirigible any types of flexible or rigid pipes. Less effort due to hose rigidity, make easier ...
Diameter: 4.6 mm - 22 mm
ELSA push-in fittings offer a safe solution for every connection. Their versatility, flexibility and durability ensure maximum effectiveness. The push-in technology enables maximum time savings through fast maintenance work. The numerous ...
RAPID fittings made of stainless steel or nickel-plated brass are suitable for connecting plastic tubes. These fittings are used for very soft tubes, vacuum applications, liquid applications or where there is a lot of movement between ...
Diameter: 6, 4, 8 mm
Operating pressure: 0 bar - 20 bar
... and microbiological growth. Ultimate hygiene Easy to clean and rinse – the hygienic and dead space free design allows quick medium change without any residues. Fully compatible The hyperfit extends the AVS Römer ...
Operating pressure: 0 bar - 16 bar
... operating pressure 16 bar Free of silicone Hardened galvanised steel for an extended service life Low coupling force for easy coupling Technical details GTIN/EAN - 4011666916112 Article ...
Operating pressure: 300, 200 bar
Push type, plated fittings permit lubricant to flow. Built-in ball, under spring pressure, prevents dirt from entering. Handy kit for shop toolroom or toolbox. On hand when needed saves time and money. Plastic compartment box is easy ...
Diameter: 1.2 mm - 4.1 mm
Straight push-in fitting M-Push 110 brass design nickel-plated with male thread and external hexagon Type: gerade Steckverschraubung Operating pressure: -0,75 – 10 bar Temperature range: 0 °C to +60 °C Material of base body: Brass ...
Diameter: 12 mm
Operating pressure: 250 bar
Application area Meiler automotive engineering Connection 1 metric cylindrical inner thread Sealing form 1 for screw-in pins with shapes A, B and if necessary E Material Steel Surface electro galvanised ...
Diameter: 4 mm - 25 mm
Operating pressure: 250, 300, 225 bar
Application area General application, e.g. in industry, construction machinery, agricultural technology etc. Connection 1 metric cylindrical outer thread Sealing form 1 24° inner cone Standard ISO 7241 series ...
Diameter: 10, 19 mm
Operating pressure: 250 bar
Application area General application, e.g. in industry, construction machinery, agricultural technology etc. Connection 1 NPT internal thread Sealing form 1 thread seal compatible with Faster Additional ...
Diameter: 4, 6, 8 mm
... just two stipulations for our technical team to develop a new quick coupling. Both have been met successfully and the new SERTO Flow Series 51 coupling is now available. The new coupling ...
Diameter: 4 mm - 12 mm
Operating pressure: 15 bar
Please note the permissible working pressure of the hose used . For Compatible hoses see chapter : Hose - HOS . Other O-Ring materials upon request : B = NBR , FDA - Compliant ; E = EPDM , FDA - Compliant ; Z = FFKM ( Kalrez )
Schwer Fittings
Diameter: 4 mm - 12 mm
Operating pressure: 15 bar
Material: 1.4404, AISI 316L, O-Ring: Viton, Maximum working pressure dependant on that of the hose used.
Schwer Fittings
Diameter: 4 mm - 12 mm
Operating pressure: 15 bar
Material: 1.4404, AISI 316L, O-Ring: Viton, Maximum working pressure dependant on that of the hose used.
Schwer Fittings
Straight connector for semi flexible polyurethane tube. Put the tube into the coupling and the connection is OK.
Goodridge G-Link quick disconnect couplings (otherwise known as dry-breaks) are a lightweight coupling that can be disconnected and reconnected in seconds, without the need to re-bleed ...
Diameter: 6 mm
Air Coupling ⅛" 90° 6 mm Push-In is a wet kit component for tipper body. Every wetkit is completed with hoses and adaptors of various types. Hyva offers a wide range of high quality parts dedicated to various truck ...
Operating pressure: 350, 700 bar
Connect 2 Quick-test XT 10,000 psi hoses together quickly and easily • Quick-test XT connection makes connecting two high pressure hoses together quick and easy • Note that ...
Operating pressure: 350 bar
... liquid or moisture can get into a control panel or enclosure • Use to connect fittings on the inside of an enclosure to a Quick-test hose on the outside of the enclosure • Will connect through a wall that is ...
Operating pressure: 350 bar
... gauges, pressure calibrators and adapters easily and quickly • Position a pressure gauge for easy reading • Connect a Quick-test hose to an adapter in hard to reach places • Durable forged construction ...
Diameter: 1.25 in
... fitting portion of couplings 20, 30 and 40 are interchangeable, as are those of the 400, 600 and 800 couplings. This means that a coupling 20 may be connected to a 30 or 40, the only ...
Diameter: 1 in
... fitting portion of couplings 20, 30 and 40 are interchangeable, as are those of the 400, 600 and 800 couplings. This means that a coupling 20 may be connected to a 30 or 40, the only ...
Diameter: 0.25 in
... fitting portion of couplings 20, 30 and 40 are interchangeable, as are those of the 400, 600 and 800 couplings. This means that a coupling 20 may be connected to a 30 or 40, the only ...
Diameter: 15 mm - 108 mm
Description NiroSan Bend 90°, female/male plain end
Diameter: 15 mm - 168.3 mm
Descroption NiroSan Coupling, female/female end 9270
Diameter: 32 mm - 110 mm
For connecting a service line to a hydrant tee, Reinert-Ritz offers a hydrant tee with a reduced barrel in different diameters. Due to the integrated reducer the hydrant connection combines several functions, so the system remains compact ...
Reinert-Ritz GmbH
Diameter: 63 mm - 630 mm
For non-underground pipe systems Reinert-Ritz offers, with the joining and expansion socket and the double joining socket, detachable push-fit couplers that are fully pressure-resistant thanks to the EPDM lip seal and are even designed ...
Reinert-Ritz GmbH
Diameter: 80 mm - 200 mm
Operating pressure: 10 bar
With the flanged push-fit socket, Reinert-Ritz offers the appropriate push-fit solution for repairs on PWE-HD pipes as well as the incorporation of flanged fittings and the transition to flanges of other piping systems. With the patented ...
Reinert-Ritz GmbH
Diameter: 18 mm - 114.3 mm
The GR2 titanium tee has very high tensile strength and toughness for general corrosion resistance and high-temperature service as well as other industrial applications. The ASTM B363 specification covers non-alloyed titanium and titanium ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining