CONTEC I/O

291 companies | 1,793 products
analog I/O module
analog I/O module
TBSPT8

The TBSPT8-DR is a precision 8 – channel PT100/PT1000 interface. Measurement and configuration is controlled via SDI-12 commands. The interface is equipped with 4-wire inputs, matched noise filters, surge- and over voltage protection. To ...

analog I/O module
analog I/O module
ZLAN6002

ZLAN6002 Remote IO Controller is an intelligent device developed by Shanghai ZLAN of digital input output and analog quantity input based on RS485. The remote IO controller can conveniently connect to ...

See the other products
Shanghai ZLAN Information Technology Co.,Ltd
analog I/O module
analog I/O module
ZLAN6042

ZLAN6042 Remote IO Controller is an intelligent device developed by Shanghai ZLAN of digital input output and analog quantity input based on Ethernet or RS485. The remote IO controller can conveniently ...

See the other products
Shanghai ZLAN Information Technology Co.,Ltd
analog I/O module
analog I/O module
ZLAN6802

ZLAN6802 is 8 channels remote IO controller launched by Shanghai ZLAN after ZLAN6042. The controlled channels from 4 channels of 6042 extending to 8 channels, including 8 channels Digital Input(DI), Digital Output(DO), ...

See the other products
Shanghai ZLAN Information Technology Co.,Ltd
TTL I/O card
TTL I/O card
M11

The M11 mezzanine card is a TTL I/O M-Module with 16 lines (Ports A and B) that can be used separately as two ports with 8 bits each or together as a 16-bit port. Control of the I/O lines is via the four ...

See the other products
MEN Mikro Elektronik
cPCI I/O card
cPCI I/O card
M28

The mezzanine card M28 with its open-emitter outputs can be used in process I/O applications (cf. M27 with open-collector outputs). If there are currents of above 500mA an intelligent power switch guarantees that the ...

See the other products
MEN Mikro Elektronik
digital I/O card
digital I/O card
M32

... respective optocoupler. Based on ANSI Standard The M32 is based on the M-Module ANSI mezzanine standard. It can be used as an I/O extension in any type of bus system, i.e. CPCI, VME or on any type of stand-alone ...

See the other products
MEN Mikro Elektronik
analog input module
analog input module

Transform Transforms analogue measurements into digital data Real-time Real-time digital measurements with alarm functions Calibration Individual calibration Limitless Limitless measurement possibilities Limitless possibilities The ...

analog input module
analog input module

Transform Transforms analogue measurements into digital data Real-time Real-time digital measurements with alarm functions Calibration Individual calibration Limitless Limitless measurement possibilities Limitless possibilities The ...

digital I/O module
digital I/O module
INGESYS IC2 RIO

... module and up to 10 I/O modules in a compact mechanical enclosure - Distributed topology In this topology the Controller is integrated by the central system expanded with up to 16 Remote I/Os units ...

digital I/O module
digital I/O module
207-ADIO-KIT

... Full-Duplex Distributed Clock1ms Cable typeCAT5 UTP/STP Ethernet cable Surge protection10KV Transmission speed100 Mbps I/O isolation voltage3750Vrms AD Converter Effective resolution16 bits Conversion time~ ...

See the other products
Taiwan Pulse Motion
slave input module
slave input module
EZC-D-SX series

... interface. The transmission speed is up to 100 Mbps. EZC Add-on moduels can provide high-speed, high-accuracy and low-cost remote I/O for EtherCAT®. Features ● 16-Ch. DO slave module with NPN type ● TPM EtherCAT® ...

See the other products
Taiwan Pulse Motion
slave output module
slave output module
EZC-D102-XN

... interface. The transmission speed is up to 100 Mbps. EZC Add-on moduels can provide high-speed, high-accuracy and low-cost remote I/O for EtherCAT®. Features ● 16-Ch. DO slave module with NPN type ● TPM EtherCAT® ...

See the other products
Taiwan Pulse Motion
digital I/O module
digital I/O module
SmartRail

... Cscape SmartRail based I/O is a modular I/O system for Horner OCS supporting Ethernet, CsCAN and CANopen based protocols. It is a flexible I/O system that can be applied as a local ...

digital I O module
digital I O module
TCW241

TCW241 is an Ethernet IO module, the right choice for factory automation and distributed process control. TCW241 is an Ethernet IO module with Modbus TCP/IP support. It is intended to use for general ...

See the other products
Teracom
analog output module
analog output module
TCW280

TCW280 is an Ethernet analog output module with galvanically isolated ports. Analog output module supports two channels with voltage or current loop modes. The channel mode is WEB interface configurable. The available choices are – 0-20mA, ...

See the other products
Teracom
remote I O module
remote I O module
TCW122B-CM

TCW122B-CM is a remote IO module with SNMP v1 support. It is dedicated to remote environmental monitoring and control. TCW122B-CM is a remote IO module for environmental monitoring and control, designed ...

See the other products
Teracom
digital I/O card
digital I/O card
UEI-PIO-1010-00-DN

Panel I/O – Processor and Multifunction I/O Board with 16 A/D, 2 D/A, 20 DIO, One I2C and One RS-232/422/485 Port Features Compact board level size (4.5" x 8.5" x 0.75") Compatible with ...

See the other products
UEI - United Electronic Industries
analog I/O card
analog I/O card
DNx-MF-101 series

... analog and digital I/O boards for use in UEI’s Cube/RACKtangle/FLATRACK I/O chassis respectively. The board offers a powerful combination of I/O including 16 single-ended/8 differential ...

See the other products
UEI - United Electronic Industries
analog input card
analog input card
DNx-AI-207 series

... 207 (DNA-AI-207, DNR-AI-207, DNF-AI-207) are analog input data acquisition boards for use in UEI's Cube/RACKtangle/FLATRACK I/O chassis respectively. The DNx-AI-207 features 16 differential input channels with maximum ...

See the other products
UEI - United Electronic Industries
safety I/O module
safety I/O module

analog input module
analog input module
Mvt series

Seven Millivolt modules enable the XR440 Data Logger to accept a millivolt signal on channel 3. Three modules (Mvt-11b, Mvt-22b, Mvt-50u) accept a thermocouple (Type J, K, N, R, S, T, B, C, or E). A built-in, precision thermistor on channel ...

analog I/O module
analog I/O module

Modular, Built-in, Local & Remote I/Os NEW! Ethernet-based Remote I/O Two Ethernet ports Slim modules – 12mm only Operating temperature range: -40°C to 70°C Supporting analog modules ...

digital master module
digital master module
IIO 041

4x SDCI ports (Single-Drop Digital Communication Interface) according to IEC 61131-9 (IO-Link) Enables the connection of up to 4 intelligent SDCI sensors or SDCI actuators All SDCI ports can also be configured ...

See the other products
SIGMATEK GmbH & Co KG
rugged input card
rugged input card
4K60

• Full quality 4K@60p 4:4:4 on a single cable • Rugged modular design • One DisplayPort 1.2 connector • Supports up to 4K60p • HDCP 1.4 Compliant  • EDID support for VESA/CEA, and custom timings • Automatic ...

digital I/O system
digital I/O system
750 series

Decentralized peripherals for every application: Boasting more than 500 I/O modules, programmable controllers and fieldbus couplers, WAGO’s remote I/O system offers all the functions required for your ...

See the other products
WAGO
Fieldbus I/O system
Fieldbus I/O system
X20 series

With its well thought-out details and a sophisticated ergonomic design, the X20 System is more than a remote I/O system, it is a complete control solution. Depending on the user's demands and individual application requirements, ...

See the other products
B&R Industrie-Elektronik
digital I/O card
digital I/O card
1260-14

The Astronics 1260-14 Digital I/O Switch Card provides 96 open collector channels in 12 groups of eight bits each. With the open collector version each independent group can utilize a separate internal or external pull-up ...

remote I/O module
remote I/O module
HX-RIO3

Hitachi´s newest Remote I/O series provides the best support on future oriented and enhanced application.The strength of this series is the flexibility by gathering machine information within decentralized applications ...

See the other products
Hitachi Europe GmbH
remote I/O module
remote I/O module
CPSN-MCB271-S1-041

... with CPSN-MCB271-S1-041 model only I/O module expansion With this product, you can freely add I/O modules to match the necessary functions from among the varied collection of CONPROSYS nano ...

See the other products
CONTEC
distributed I/O system
distributed I/O system
SIMATIC ET 200

... independent of the controllers and I/Os used. The MultiFieldbus is therefore also the solution if an application is to be set up with different controllers (fieldbuses) and the I/O system is to continue ...

See the other products
Siemens Safety Integrated
analog input module
analog input module
BCS-NX6000

... 0.1 % of full scale rating @ 25 °C Ranges - 0 to 10 VDC, -10 to +10 VDC, 0 to 20 mA, 4 to 20 mA, -20 mA to +20 mA Digital IO Update time - 1 ms with one channel, 6 ms with all channels

See the other products
Beijer Electronics, Inc.
IP65 input module
IP65 input module
FDCI221

For the connection of 1 circuit of potential-free make-or-break contact for the indication of technical states (e.g. door or ventilation control) or for alarm actuation (e.g. sprinkler alarm). 1 input for potential-free contact. Input ...

See the other products
Siemens Fire Safety
digital I O module
digital I O module
RIO600

... expand the digital and analog I/O of ABB’s Relion® series protection relays, provide I/O for the station automation device COM600 using IEC 61850 communication and Grid Automation applications The ...

digital I/O module
digital I/O module
MDS NETio

... Fully-isolated I/O Application Flexibility •Handles diverse I/O configurations including analog 4-20 mA, 0-5 V or 0-10 V and digital 5-36 VDC •Long range wireless communication up to 30 miles (900 ...

remote I/O module
remote I/O module
9468/32-08-10

Application range (zones): 1, 2 Ex interface zone: 0, 1, 2, 20, 21, 22 Max. voltage Uo: 24.40 V AT_ST00589: no Highlights - Eight channels can be used individually as inputs or outputs Intrinsically safe Ex ia IIC inputs/outputs ...

See the other products
R. STAHL AG
exhibit your products

& reach your clients in one place, all year round

Exhibit with us