Delphi injection pumps

Pressure: 0 psi - 1,500 psi

Python pumps are ideal for applications that require a pump to operate in hazardous locations and can run off regulated natural gas or compressed air. These pumps have the lowest out-of-pocket ...

Flow: 7 l/min - 40 l/min
Pressure: 25 bar
Head: 60 m

The S 5 EVTM plastering machine is a modular system. This plastering pump comes with the TM pan mixer. The pan mixer enables you to mix high-quality materials delivered as bagged material. It is suitable for a variety ...

Flow: 0 m³/h - 300 m³/h
Pressure: 0 bar - 220 bar
Head: 0 m - 2,100 m

RHM: Horizontal multistage barrel pull-out pump. RVM Vertical multistage barrel pull-out pump.

Pressure: 6 bar
Fluid temperature: 60 °C
Weight: 22 g

... pumping - Quality of mixed materials thanks to the direct injection in the high performance unique design static mixer - Unsurpassed +/- 3% mixing accuracy due to the innovative pump change over ...

Flow: 0.2 l/h - 300 l/h
Pressure: 0.5 MPa - 1.7 MPa
Power: 110 W

... from a mechanically driven diaphragm pump. *Some low flow rate areas are excluded. Energy savings and Eco-friendly Helical gears and spring assistance reduce power consumption by 70% compared to conventional ...

Flow: 0.8 l/h - 660 l/h
Pressure: 5 bar - 207 bar

mROY series metering pumps control chemical dosing with unmatched accuracy and reliability. This dosing pump is durable, compact in design and enables metering of some of the harshest ...

Flow: 1 l/h - 30 l/h
Pressure: 5 bar - 20 bar
Power: 5 W - 35 W

... mechanical and electrical components • Manual flow rate adjustment by a knob • Dual scale adjustment: 0 – 20% and 0 – 100%. • Proportional mode 1:1 by water-meter pulse-sender signal • Manual air-bleed ...

Flow: 0.21 us gal/h - 2 us gal/h
Pressure: 50 psi - 250 psi

... EXCEL® AD is a solenoid pump that gives you improved electro-magnetics to meet your specific flow and pressure requirements, up to 250 psi (17.2 Bar) with capacities between .002 and 2.0 GPH (.8 to 7.6 l/h). The EXCEL ...

Flow: 0 m³/h - 5,000 m³/h
Pressure: 0 bar - 150 bar
Fluid temperature: 0 °C - 350 °C

Leistritz Screw Pumps , Series L4 are self-priming rotary positive displacement pumps for pressure ranges of 16 bar (232 psi), 40 bar (580 psi) and 150 bar (2175 psi) suitable for the transport of lubricating ...

Flow: 1 m³/h - 60 m³/h
Pressure: 1 bar - 16 bar
Head: 1 m - 55 m

... customer issued a challenge: to create a pump able to withstand the presence of solids, suitable for heavy duty processes, safe and reliable enough to avoid cloggings or breakages tipical of centrifugal pumps ...

Flow: 0 m³/h - 5.2 m³/h
Pressure: 0 bar - 4.5 bar
Head: 0 m - 9 m

Self-Priming JET Pumps PJ Model:PJ The following is about Self-Priming JET Pumps PJ related PJ, I hope to help you better understand Self-Priming JET Pumps PJ. Self-Priming JET Pumps ...

Pressure: 1,800 bar

Pumps which are used for the injection of fuels into diesel engines rank among the technically most demanding members in the family of pressure generators. The provision of fuels under high pressure to ...

Pressure: 175, 210, 160 bar
Power: 0 kW - 10 kW
Length: 222 mm

Fixed Displacement Vane Pumps – PV2R Single Vane Pumps – These pumps are of high pressure and high performance, which have been developed especially for low noise operation. To comply ...

Flow: 6 l/s - 150 l/s
Pressure: 1 bar - 4 bar
Power: 0 kW - 246 kW

... low-pressure water cannon outlet and one injection outlet of water supply tank water, with two high pressure (medium pressure) water gun outlets; the piston water pump can form a maximum vacuum ...

Flow: 0.23 l/min - 719 l/min
Pressure: 34 bar
Fluid temperature: -40 °C - 230 °C

The SG Series™ spur gear pump is the ideal solution for pipeline injection, pipeline sampling, oil polishing, and more due to its high pressure capabilities and efficiencies. Features & Benefits Needle ...

Flow: 0 l/min - 1.6 l/min
Pressure: 10 bar - 200 bar
Fluid temperature: -30 °C - 130 °C

The HPP 200 is a very compact high-pressure pump that is particularly suitable for pressurization when pumping low-viscosity liquids. The basic version of the pump is designed for a continuous ...

Flow: 0 us gal/min - 215 us gal/min
Pressure: 0 psi - 350 psi
Fluid temperature: -20 °C - 200 °C

... addition of thin sludge for blending and can also be used for draining the pump Large auger design as standard - ribbon auger available to assist blending/conveying of product into the pump Option of ...

... supply water via the ventury effect.The portion of the pressurized water in the converging and diverging pipes creates a vacuum that causes the suction of the liquid to be discharged. A non-return valve, mounted at ...

The grouting pump P101PE is suitable for compensation grouting through pipes fitted with valves, or any other application where an accurate control and record of grouting variables is required. Also can be used as a flushing ...

Pressure testing of large i.d. pipelines, hose umbilicals, wellhead control valves... Chemical injection including methanol and glycol Pre-charge of hydraulic accumulators Operation of Sub-Sea Valves Pre-fill and ...

Flow: 3, 1.5, 5 l/h
Pressure: 8, 7, 5 bar
Power: 16 W

... moving parts Robust, compact reliable design Pump-head with manual priming system Standard level probe compability Manual adjustment, Pulse frequency regulation Proportional ...