Dropsa lubricant pumps

Flow: 9.5 us gal/h - 114.3 us gal/h
Pressure: 45 bar - 225 bar

The LK Series metering pump is the largest in the high performance line of pumps from Walchem. The LK is a motor-driven, mechanically actuated diaphragm metering pump with a maximum capacity ...

Flow: 300 m³/h
Pressure: 0 bar - 16 bar
Head: 95 m

Pumps of the series ULN are horizontal, self-priming, single-stage volume casing pumps with dimensions and nominal outputs according to EN 733 / DIN 24255 in back pull out construction. The back pull ...

Flow: 600 m³/h
Pressure: 16 bar
Head: 95 m

... removing the pump casing from the pipe work. If a spacer coupling is installed it is also unnecessary to disconnect the motor. Applications: The volute pumps of the series ZHN are part of the overall ...

Flow: 600 m³/h
Pressure: 40 bar
Head: 90 m

... removing the pump casing from the pipe work. If a spacer coupling is installed it is also unnecessary to disconnect the motor. Applications: The volute pumps of the series ZEN are part of the overall ...

Flow: 720 m³/h
Pressure: 16 bar
Head: 110 m

Slurry pumps have been designed for pumping liquid containing solid particles. Slurry pumps changes in design and construction to adjust to multiple type of slurry which varies in concentration of solids, ...

Flow: 15,600 m³/h
Pressure: 16 bar
Head: 110 m

End suction pumps can be supplied in vertical execution as sump pump to handle different type of liquid for various applications in industries. These pumps are offered with enclosed or ...

Flow: 0.96 m³/h
Head: 0.96 m
Power: 0.18 kW - 0.37 kW

C.R.I. 2″ G – Flow Series deep well / bore hole submersible pumps are designed to offer as a compact kit with pump, motor and control box in one pack. These pumps are ...

Flow: 0 l/h - 2,700 l/h
Pressure: 0.3 MPa - 1.5 MPa
Power: 0.25 kW - 1.5 kW

... The result is the employed compact and rigid mechanism. An outdoor installation is due to the fully enclosed oil bath lubrication possible. Various Typs and material Fitting for nearly any application ...

Flow: 0 l/h - 6,000 l/h
Pressure: 0.2 MPa
Power: 4.8 W - 200 W

The suction side of these diaphragm air pumps can be used as a vacuum pump and discharge side can be used as compressor. By the compact and light construction the APN ...

Flow: 0.9 m³/h - 36 m³/h
Pressure: 7 bar

Almatec E-Series State-Of-The-Art Plastic AODD Pumps The development of the E-Series was based on the extensive experiences with the proven pump models. The solid design with distinctive wall thicknesses, ...

The Macnaught 20L ATF Hand Pump is your reliable fluid transfer companion. This pump is equipped with an anti-drip aluminium nozzle, ensuring precision and cleanliness with every stroke. No more messy ...

The Macnaught 60L ATF Hand Pump is your reliable fluid transfer companion. This pump is equipped with an anti-drip aluminium nozzle, ensuring precision and cleanliness with every stroke. No more messy ...

Flow: 10 l/min

... within pump body Motor is protected by IP55 rating Supplied with connection cables and alligator clips Pump is suitable to use with Diesel, Kerosene and light oil with viscosity less than 500CST Package ...

Flow: 6, 1, 15 l/min
Length: 180, 165 mm
Width: 230, 160 mm

Electric gear pump for an intermittent use, for the transfer of low viscosity oil, antifreeze (A), diesel (D), water (W). Protection category IP55. Pump body in brass, gears in bronze and pump ...

Flow: 15, 6 l/min
Length: 165, 185 mm
Width: 160, 240 mm

Electric gear pump for an intermittent use, for the transfer of low viscosity oil, antifreeze (A), diesel (D), water (W). Pump body in brass, gears in bronze and pump shaft in stainless ...

Flow: 25, 23, 13.5, 9, 12 l/min
Length: 100, 120, 300 mm
Width: 120, 220, 100 mm

Manual lever action and rotary drum pumps, made of carbon steel with components in aluminium. Main fields of application: transfers and dispenses of small quantities of oil or diesel ...

Flow: 12 m³/h
Power: 0.37, 0.25 kW
Weight: 8, 12 kg

The FL20C centrifugal pump is well known for its small size and high performance. Despite their small size, these pumps can provide flows up to 12 m3/h with good outcomes. FL20C pumps ...

Flow: 18 m³/h - 2,000 m³/h
Pressure: 0.3 MPa - 2 MPa
Head: 20 m - 500 m

... other variables to optimize the performance of the pump. It also provides necessary information to operators, such as pump flow rate, pressure, and other relevant data. The controller can be manually ...

Flow: 4 m³/h - 1,200 m³/h
Head: 8 m - 150 m
Power: 2.2 kW - 180 kW

... Hydraulic pump develops into HOT WATER CIRCULATION PUMPS (KYWR/KYLR), chemical engineering pump (KYHL), oil pump (KYYG) and ex proof chemical pump (KYHY) ...

Flow: 1.5 m³/h - 1,200 m³/h
Pressure: 1.6, 2.5 MPa
Fluid temperature: -20 °C - 120 °C

... hot-water pump, model KYWH Chemical pump, model KYWB oil pump and model KYWHB horizontal anti-explosion chemical pump etc. series products are designed and manufactured ...

Flow: 0 m³/s - 40 m³/s
Pressure: 0 bar - 40 bar
Fluid temperature: 0 °C - 120 °C

Vertical immersion pumps are multistage centrifugal pumps for installation on the mounting flange of tanks. PUMPED LIQUIDS Light, non-explosive, clean or contaminated liquids. Water Cutting fluid Lubricants

Flow: 0 l/min - 650 l/min
Pressure: 0 bar - 100 bar
Fluid temperature: 0 °C - 60 °C

High pressure pumps High pressure spindle pumps. Solution for deep boreholes and the high pressure clearance of chippings. PUMPED LIQUIDS Light, non-explosive, clean liquids with at least 5% of ...

Flow: 0.5 m³/h - 3.5 m³/h
Pressure: 0 bar - 10 bar
Head: 9 m - 54 m

Horizontal low pressure multistage pumps can be used in numerous installations where the pump features and materials require specific conditions, such as: Air-conditioning Cooling Water treatment Fertilisation Environment ...

Flow: 366.5 m³/h
Pressure: 1,100 bar
Fluid temperature: -40 °C - 200 °C

... The RDP series of Reciprocating Plunger Pumps is suitable for handling most liquids for Oil & Gas, Industrial and Wastewater Treatment applications. RP's RDP pump series are a type of positive displacement ...

Flow: 2,886 m³/h
Pressure: 26 bar
Head: 235 m

... centrifugal pump that works around a basic hydraulic and mechanical concept to guarantee its efficiency across a broad range of operating conditions, application flexibility and interchangeability. Overview The CPP ...

Flow: 1,590 m³/h
Pressure: 26 bar
Head: 198 m

... process pump is ANSI / ASME B73.1 compliant and operates even in the toughest industrial and chemical applications. Its highly-engineered Power Frame is 100% interchangeable with competitor pump brands. Overview With ...

Flow: 0.7 m³/h - 9,370 m³/h
Pressure: 20 bar - 450 bar
Fluid temperature: -40 °C - 120 °C

... accuracy and reliability. The features include: Hydraulic oil-operated diaphragms Double oil for hydraulics and mechanism lubrication ensuring 100% chemical tightness and operational safety for higher reliability, ...

Flow: 3.4 l/h - 660 l/h
Pressure: 124 bar
Power: 1.1, 1.5, 0.18, 0.25, 0.75 kW

... result is a pump that delivers metering precision and consistency for repeatable results and efficient chemical consumption. Reliability Nyva’s ATEX-approved design and zero-leakage profile provide operators with ...

Flow: 0.21 m³/h - 67.69 m³/h
Pressure: 39 bar - 1,146 bar
Power: 2.2 kW - 110 kW

3C Triplex Pumps Series Process pumps for high-pressure duties A flexible, robust and reliable solution to pumping high temperature, abrasive and viscous liquids in a multitude of industrial applications, ...

Flow: 57 l/min
Pressure: 10 bar

... applications of low viscosity fluids, diesel, non aggressive fluids, short distances without reels. Needle valve for regulating pump speed is included. Designed for quiet and reliable operation and for 200l drums, spout ...

Flow: 0 us gal/min - 160 us gal/min
Length: 450 mm
Width: 333.5 mm

... double-diaphragm (AODD) pump is engineered to safely seal when pumping aggressive chemicals. The 2" AODD pump offers an ideal combination of flow, size and portability, with a maximum flow rate of 163 ...

Flow: 0 us gal/min - 234 us gal/min
Length: 208 mm
Width: 381.22 mm

... ATEX-certified AODD pump is suited for use in potentially hazardous environments, including those containing chemicals, oil and gas. Versamatic delivers the safety of ATEX compliance in the pump styles ...

Flow: 0 us gal/min - 234 us gal/min
Length: 508 mm
Width: 381.22 mm

... ATEX-certified AODD pump is suited for use in potentially hazardous environments, including those containing chemicals, oil and gas. Versamatic delivers the safety of ATEX compliance in the pump styles ...

Flow: 0.4, 0.2, 0.1 l/min
Pressure: 200, 320, 400 bar
Power: 1.1 kW

The pump is designed to lubricate friction nodes in machines and devices through dosing distributors (two-way feeders). It is recommended for use in high-load machines and devices, with a large number of lubrication ...

Flow: 0.03, 0.06 l/min
Pressure: 200 bar
Power: 0.38 kW

The pump is designed to periodically feed lubricant or oil to friction nodes in machines by means of two-way dosing units (dosing distributors). It is recommended for heavy duty machines and plants ...

Pressure: 100 bar
Fluid temperature: -10 °C - 60 °C
Width: 158 mm

... with similar equipment and work conditions. The pump consists of the following units: lubricant tank, pump body with pumping system elements, distribution slider ...

Flow: 10 m³/h - 1,400 m³/h
Weight: 142 kg - 1,956 kg

The Linatex pump, type III R, belongs to the latest generation of successful wear-resistant and corrosion resistant slurry pumps and has an improved efficiency. It has in practice proven durable Linatex ...