... wide range of applications from custom-designed, heavy-duty fans for use in locomotives and off-highway vehicles to standardised, light duty commercial air handling fans. We make OEM axial ...
... Howden SX fan's acoustic output is up to 20 dB(A) lower than comparable conventional cooling fans and in many cases eliminates the need for expensive and bulky sound attenuation equipment. The blades ...
The E-Series fan blades have an integral shaft, are positioned on the fan hub-plate by aluminium blade supports and are fastened by U-bolts for simple field assembly and blade pitch adjustment.
Air flow: 0 ft³/min - 58,000 ft³/min
... Drive Panel Fan Before the development of PowerMate, fan selection was often a compromise between too little and too much - "close enough" was good enough. Now, with hundreds of PowerMate propeller ...
Air flow: 0 ft³/min - 250,000 ft³/min
Design 47 Adjustable Pitch Vane Axial Application Chicago's Design 47 Vane Axial Adjustable Pitch Fans are used in applications where demands vary with system or seasonal change. ...
Air flow: 0 ft³/min - 250,000 ft³/min
Design 47 Controllable Pitch Vane Axial Application Chicago's Design 47 Vane Axial Controllable Pitch Fans respond automatically to signal source based on changes in temperature, ...
Air flow: 7,500 m³/h
Air flow: 4,320, 2,940, 2,040 m³/min
HANIL Electric Co.,Ltd
HANIL Electric Co.,Ltd
Air flow: 17 m³/min - 72 m³/min
HANIL Electric Co.,Ltd
Air flow: 0 ft³/min - 1,750 ft³/min
... exhaust fans for gas and solid-fuel venting applications. The fans are designed to withstand the high temperatures associated with stone hearth cooking, and creosote production that results from solid ...
Air flow: 0 ft³/min - 30,000 ft³/min
... housing & aluminum propeller (Stainless Steel 316L optional) Axial vane / propeller Variable-speed motor, TEFC, Class A Optional: Electrically commutated motor for optimal performance ...
Air flow: 0 ft³/min - 1,500 ft³/min
... high-temperature exhaust fan is typically used in venting solid-fuel fireplaces, BBQs, pizza ovens and stoves. Installation is clean and easy - and the fan's compact design is barely visible from ...
The single-stage axial fan is used for transport of large air volumes with low pressures. The double-stage axial fan is constituted by an embossed or welded (to a single ...
The high temperatures axial fan is designed and manufactured to work with extremely high process temperatures and it can be single-stage or double-stage. The high temperature axial ...
... to design and manufacture an axial or centrifugal roof exhaust fan for air suction at temperatures up to 100/110°C. The high temperature roof exhaust fan was created to satisfy the ...
In case of a potential fire, the smoke extract fans provide rapid smoke evacuation; Thanks to the specially designed blade structure and adjustable wings, it is possible to reach the high pressures and flow rates. IP55 ...
POINT KLIMA
... Although the arrangements are allowed for the escape and the rescue routes, the fire escapes are always recommended. The pressure fans work in the temperature range of 200 C/2h, 300 C/2h, 400 C/2h.
POINT KLIMA
The rooftop axial fans are designed for use at the exterior spaces and on the roof tops. The motor is coupled directly to the impeller inside the airflow. The wings are designed for the maximum efficiency ...
POINT KLIMA
Air flow: 3.28, 2.36, 2.97 m³/min
Rotational speed: 6,400, 5,800, 4,650 rpm
Noise level: 47, 50, 40 dB
... /24/48 V rated voltages. The broad lineup of fans enables you to choose the right fan best suited to your applications. (1) Based on our own research as of November 13, 2023, conducted among axial ...
SANYO DENKI America
Air flow: 0.42 m³/min - 9.9 m³/min
Rotational speed: 3,000 rpm - 8,000 rpm
Noise level: 28 dB - 49 dB
... Series 24 VDC axial flow fans have been designed to deliver the best in ventilation and cooling technology. With five different models (standard, alarm, long-life, variable flow and splash proof) to choose ...
ORIENTAL MOTOR
Air flow: 1,206 m³/h - 1,465 m³/h
Noise level: 88 dB
... OSHA; plated steel • Easily attach 8” duct (203 mm) to inlet & outlet • Glass-reinforced, polyester resin, spark-resistant fan blade • Reversible, locking, inlet flange for ducted and non-ducted applications • 60 ...
COPPUS
... low ceiling heights and where an axial fan solution is preferred. The product is comprised of a cased Axial fan, factory-fitted inside two octagonal, un-podded silencers, ...
FläktGroup
This rotor can do both. The HUgo from Klingenburg transfers sensible and latent heat (i.e. energy bound up in moisture) simultaneously and sets new standards in terms of performance, hygiene, quality and reliability. Effective in Warm, ...
Air flow: 3,000 m³/h - 28,000 m³/h
Diameter: 400 mm - 1,250 mm
Rotational speed: 270 rpm - 1,440 rpm
It is mainly composed of the impeller, motor, air duct and cover net. To be specific, the impeller is made of high-strength aluminum alloy sheet by molding. The motor is outdoor type with protection class IP 55 (or 56) and insulation ...
ERG Technology
... weight, portable design and fan angle adjustable. Power (Max) 35W Ion balance ±5V Output voltage ± 5000 VDC Ozone generating amount Lower than 0.01 PPM (measured at 15 cm in front of the ...
Air flow: 7.36 ft³/min - 200.9 ft³/min
... and function types. A number of ball bearing fans are in stock and available for purchase online, however Aavid manufactures hundreds more options as well as custom fans and fan systems. All ...
Air flow: 0.2 m³/min - 6 m³/min
AC fan motors driven by AC voltage rotate fans to cool the inside of industrial machines and other equipment instruments and exhaust the heat outside. AC fan motors use ball bearings ...
Air flow: 0 ft³/min - 86,000 ft³/min
New York Blower Tubeaxial Fans are designed for moderate-pressure ventilation and industrial-process applications where axial flow is desirable and space is at a premium. Uses include heat, smoke and ...
NYB
Air flow: 60 m³/h - 90 m³/h
Lowest power consumption of only 5 Watt (at vol. = 75 m3/h). Extremely quiet due to the new ultraSilence® technology; just 25 dB(A)* (at vol. = 75 m3/h). Achieves a volume/pressure of 60 m3/h air flow at 31 Pa. Maximum air flow 90 m3/h, ...
Helios Ventilation
... keep temperatures consistent from floor to ceiling. The XL3 Fan is a program of large, high-volume/low-speed (HV/LS) ceiling fans, offering big benefits over high-speed ceiling or floor fans, ...
ZHEJIANG SHANGFENG SPECIAL BL OWER INDUSTRIAL COMP
Air flow: 5,500 m³/h - 30,000 m³/h
... HVAC and air conditioning Standard requirements for flow fans; 7) Product advantages: ensure the characteristics of high-efficiency axial flow fans for air-conditioning systems, and ...
Jiangsu Fulihua General Equipment Co., Ltd
Air flow: 195 m³/h
Rotational speed: 2,480 rpm
Noise level: 37 dB
... Product description Standard model •On/off via light switch or separate switch. •Speed controllable. • 1-level small room fan for ventilating the exhaust air rooms. • Suitable for continuous operation. • Standard ...
MAICO Ventilatoren
Diameter: 1,000 mm - 2,500 mm
The fan units of the SAF Series are specifically designed for the ventilation of Metro lines and for the transversal ventilation of road and rail tunnels. They can be controlled by sensors and inverters for the best ...
comet fans
Air flow: 15,000 m³/h
Ceiling fans for reducing energy costs Thermal dynamic pushes heat upward. Result: Unused quantities of heat dam up near the ceiling. With the REMKO DVL 140 ceiling fan, this lost heat potential can ...
Radiators for engines from 15 kW to over 1000 kW. Combicooler. radiator-intercooler CAC - oil cooler
Oesse
Please specify:
Help us improve:
remaining