EBMPAPST steel fans

Air flow: 50,000 m³/h

... 10.000 Pa • Overhung design • Flow one-sided suction • Drive power up to 110 kW • Bearing: Without • Installation with steel bearing pedestal Special models • Ex-protection • Galvanized

Air flow: 2,190 m³/h - 160,000 m³/h
Diameter: 315 mm - 2,000 mm

... QUALITY STEEL SHEET The casing of the duct fan is made of high quality sheet steel and powder coated black according to the applicable standards. The fan has a modular ...

Air flow: 5,700 m³/h - 55,800 m³/h

... flexibly. Fan blades are adjusted by intelligent dynamic-balance tester, each blade tolerance weight controlled within 1g. Ensure the fan smooth running, lower vibration, less noise, increase stability. Blade ...

Air flow: 1.7 m³/h
Diameter: 76.5 in - 148 in
Rotational speed: 880, 1,180, 710 rpm

Jetstream Axial Mine Fans (AMF Series) are heavy-duty axial fans designed specifically for main mine ventilation. These robust adjustable-pitch fans have been designed to deliver up to ...

Air flow: 1,325 m³/h - 100,000 m³/h

... Ø 1250 mm diameter Hot dip galvanized sheet metal fan casing Cast aluminum adjustable blade angle impellers Aerodynamic profiled impellers allow high efficiency and low noise Die ...

Air flow: 1,722 m³/h

... is easy to control. An axial fan, in general, is the most commonly used as cooling fan, as well as the most cost effective. Also called “box fan” on occasion, they move air on a straight ...

... CON­VEY­ING ME­DIA AT UP TO 1,000 °C Fans are usu­ally key el­e­ments of pro­duc­tion processes with ven­ti­la­tion sys­tems. If the op­er­at­ing site has to con­tend with high tem­per­a­tures, it will use hot-gas ...

Air flow: 144 m³/h - 159 m³/h
Rotational speed: 2,400 rpm - 2,650 rpm
Noise level: 60 dB - 62 dB

Fireplaces Other components and systems Pellet / biomass boilers Pellet / biomass stoves IMPELLER SIZE MOTOR TYPE FREQUENCY POWER MAX STATIC (mm) ...

Air flow: 43,000 ft³/min
Diameter: 59 in
Noise level: 34 dB

59″ overhead fan providing huge air for mid-size areas, and quiet areas. The SD5X industrial fan is perfect for mid-size to large areas that need huge, even airflow. With a totally-enclosed 1.5 HP ...

Air flow: 50 m³/h - 2,400 m³/h

... spot-welded steel sheet spiral casings are fitted with securing flanges. The special holes make it possible to orient the fan discharge angle in 45° steps by rotating either clockwise RD or counterclockwise ...

Air flow: 131 ft³/min
Rotational speed: 3,900, 3,300, 2,700 rpm

MFFP100 METAL FILTERED FAN PACKAGES Powder Coated Steel. Includes filtered fan, filtered exhaust vent and gaskets. UL types 1 and 3R FEATURES: 16 Gauge Powder Coated ...

Air flow: 100 m³/h - 700,000 m³/h

I.VA.CO. fans division consists of a team of qualified technicians with wide and relevant experience, who are able to design special industrial fans by using the most updated technologies. Heavy industrial ...

Air flow: 3,000 ft³/min

... with a cord and circuit breaker · Lightweight and portable · Has a high air velocity · Robustly made with a steel body and heavy gauge steel case · Epoxy coated · Has a GFCI protection · Has a duplex ...

Meterial： Galvanised sheet steel Type of protection： IP42 Approvals： CCC CE Insulation class： B Characteristic 1.Applicable to high airflow; 2.Applicable to high pressure; 3.Applicable to large system resistance; 4.Applicable ...

Air flow: 5.5, 6 m³/min

Frame: - Steel with black painting Impeller: - Plastic & Aluminum Bearing System: - Ball bearing or sleeve bearing Motor: - Capacitor start-run or Shaded pole Protection: - Impedance-Protected or ...

... Enjoy cooling airflow up to 120 ft from the fan thanks to Pivot 2.0’s powerful direct drive motor and highly efficient patented airfoils. BUILT FOR TOUGHNESS Pivot 2.0’s easy-to-install, durable steel ...

Air flow: 1,160 m³/h - 10,800 m³/h

Application Commonly, these fans have been designed for local ventilation. They are installed on wall brackets inside the buildings (indoor application). As they can overcome significant air flow resistances, they ...

Air flow: 510 m³/h - 8,290 m³/h

Application The IBF fans are used in various mechanical ventilation systems. They combine advantages of axial fans' air flow direction with those of radial fans' stable compression, ...

Air flow: 0.15 m³/s - 9.7 m³/s

... AW/AR fans have integral thermal contacts, are reliable, maintenance-free, and have a controllable speed. The AW/AR fans have external rotor motors with controllable speeds. The AW fans ...

Air flow: 330 ft³/min - 6,800 ft³/min

... cooking, and oriental cooking Constructed of steel, the model USGF includes a non-stick coated steel wheel, steel windband, steel curb cap, and steel ...

Air flow: 500 m³/h - 16,000 m³/h

Air flow: 0 ft³/min - 31,500 ft³/min

... to 315,000 CFM Pressure up to 28" WG Temperature Range -30° to 800°F Arrangements 1, 3, 4, 4V, 7, 8, 9 AFSW Wheel Types Steel Wheel For Relatively Clean Air Applications with Little or No Particulate Tapered ...

Air flow: 100, 150 m³/h

Visconti - Domestic fan Available versions Sstandard WCHtimer, humidistat standard versions 017-9218visconti 100 S chromestandard 017-9216visconti 100 S satinstandard 017-9214visconti 100 WCH chrometimer, humidistat 017-9212visconti ...

Air flow: 2,300 m³/h - 140,000 m³/h

... temperature of the carried air is 90°C, for temperature values up to 350°C the fans will be provided with a cooling fan and will be varnished with high-temperature aluminum paint

Diameter: 150 mm - 700 mm

... customization. Impellers with straight, curved and profiled blades are available on all types of centrifugal fans. Furthermore, carbon steel, stainless steel or aluminium, can be used ...