ELETTROTEC level sensors

Level range: 0 m - 70 m
Process temperature: -40 °C - 100 °C

... / Two-wire Introduction SUP-RD909 Radar level meter adopts a recommended industry emission frequency of 26GHz. The measurement range of up to 70 meters, covering a large reservoir water level measurement.

Level range: 300 mm - 2,500 mm
Process pressure: 0 bar - 10 bar
Process temperature: -10 °C - 80 °C

MaterialsStem: brass Float: NBR Connection: anodized aluminium Gasket: NBR Sensor distance SL1 – 15mm SL2 – 10mm Connection FA – Ø92 flange TA – G2” thread Output Potentiometric Signal converter - - Protection IP65 ...

idOil sensors are an integral part of the idOil oil separator alarm system and they are to be used with the idOil control units. All idOil sensors are digital and polarity free. Standard cable length ...

Process pressure: 209, 100 psi
Process temperature: -40 °C - 125 °C

... digital optical level sensor is a small point level sensor with built-in electronics and works with no moving parts. Optical sensors are an optimal choice ...

Process temperature: 0 °C - 50 °C

Infrared Sensor for Fill Level Inspection The TapTone Fill_ir sensor is a non-contact fill level inspection module. The system uses Optical technology to detect an infrared ...

Process temperature: -10 °C - 60 °C

External mount Fast fitting Compact size Easily serviceable Customized wire length Operating temperature – 10 ºC to + 60 ºC

Process temperature: 80 °C

The level sensors are designed to accurately perceive liquid levels in applications such as petrol-vending machines, washing machines, drink-vending and coffee-vending machines. They ...

Level range: 800 mm - 20,000 mm
Process pressure: 1 bar - 25 bar
Process temperature: -50 °C - 100 °C

... in correspondence with measured levels quantity) is placed inside the guide pipe. Board are connected serially with two wires, forming a variable resistor with resistance determined by the liquid level. ...

Level range: 0 m - 200 m
Process temperature: -10 °C - 70 °C

The MPM316W submersible level sensor is the perfect solution for measuring and monitoring of level. The air guide tube inside the cable connects the sensor back pressure ...

Level range: 3 m - 30 m
Process pressure: -1 bar - 400 bar
Process temperature: -40 °C - 400 °C

Ultrasonic Level Sensor by FEEJOY, the ultrasonic level sensor manufacturer and supplier, is mainly used to measure liquid level and material level. ...

ultrasonic level , for liquid in not pressurized tanks

18M series includes submersible electronic level transmitters with 4÷20mA output proportional to hydrostatic pressure detected by means of a piezoresistive sensor. All 18IM series versions have housing ...

Level range: 0.5 m - 60 m
Process temperature: -55 °C - 125 °C

... environment or rain have very small affect on the detection performance of ultrasonic sensors. Features Non-contact measurement Short response time With display Level value output or ...

... server and the actual water level or measured values over a selected time period can be viewed by means of the web-based application. The system allows sending alarm messages to the given email address or by SMS when ...

Level range: 9 m
Process temperature: -20 °C - 80 °C

... mains or battery operated fuel tank alarms, when either a high level, low level or bund alert is required. If both high and low level alerts are requirements of your fuel storage tank ...

Wireless pit level sensor for mud logging unit Wireless pit level sensor is to monitor changes of pit level. Based on the principle of ultrasonic ...

Level range: 60 mm - 6,000 mm

Ultrasonic level sensors measure the clearance between a liquid level and the sensor's transmission surface using the echo time measurement of an ultrasonic signal. Liquid ...

Level range: 80 mm - 23,000 mm
Process temperature: -25 °C - 85 °C

Magnetostrictive liquid level sensor apply the principle of magnetostriction to create a new generation of high precision liquid level sensor,using advanced digital and ...

Level range: 80 mm - 2,000 mm
Process pressure: 2, 10 bar
Process temperature: -40 °C - 85 °C

T/LL130 series fuel level sensor The Model T/LL130 series is designed for use in water, coolant or fuel/ oil tanks and provides a variable resistive or voltage output suitable for driving industry standard ...

Process pressure: 10 bar
Process temperature: -20 °C - 140 °C

... adhesive media by parameterization of both on and off condition Description The LEVELTEC L capacitive level switch is used specifically for low level (empty) detection at tank bottoms for pasty and ...

Level range: 250 mm - 2,000 mm
Process pressure: 20 bar
Process temperature: -20 °C - 100 °C

The principle of the LN3000 series is that under the action of liquid buoyancy, a floating ball with magnetic steel moves up and down along the guide rod, continuously triggering a magnetic switch in the guide rod. The magnetic switch ...

Process temperature: 160, 100 °C

Conductivity level probe made of stainless steel AISI 316 with PTFE coating Main Features Stainless-steel stem in AISI316 (1.4408) Coating in PTFE Fixed or adjustable length versions Electrical ...

Level range: 0.5 m - 15 m
Process temperature: -40 °C - 60 °C

... ultrasonic hydrometric level sensor, equipped with its own electronics with microprocessor and storage memory. ULM30 consists of a latest generation ultrasonic transducer, suitable for both transmission ...

Level range: 0 m - 8 m

The VEGAPULS C Series wired sensors are non-contact, continuous level radar sensors with high protection. Application Area The VEGAPULS C Series wired sensors are non-contact, ...

Level range: 18 mm - 150 mm

... dipstick Detection of low level & overfill Absolute measurement of oil level in static and dynamic conditions TECHNICAL INFORMATION Measuring principle: ultrasonic echo Measuring range: ...