- Machine-tools >
- Cutting Tool >
- Coated drill bit >
- EMUGE FRANKEN
EMUGE FRANKEN coated drill bits
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Diameter : 0.15 mm - 2.9 mm
Length: 19 mm - 175 mm
... even better performance The HSS drill range is being expanded with the addition of new drills made from powder-metallurgically-manufactured HSS. HSS-E-PM drill High cutting ...
CERATIZIT CUTTING TOOLS
Diameter : 3 mm - 4.7 mm
Length: 62 mm - 153 mm
Product description Description: Rake angle 30° Shank Ø h7 Description: Spiral flutes Description: SZID = Coupling Size TQX = Torque Moment NOF = No. of cutting edges CERATIZIT has been a pioneer in the field of ...
CERATIZIT CUTTING TOOLS
Diameter : 2.5 mm - 4.9 mm
Length: 57 mm - 310 mm
... AL High Performance Drill DLC-coated solid Carbide high-performance drill, specially designed for applications in aluminium, non-ferrous metals and cast iron materials. Advantages More ...
CERATIZIT CUTTING TOOLS
Diameter : 0.5 mm - 6 mm
Length: 30, 40, 45, 50, 60 mm
... variants. The MiquDrill drilling program focuses on small diameters. All sizes are available from stock and in uncoated and coated versions. The major advantage: diameter increments at every 0.01 mm (.0004ˮ). MiquDrill ...
Mikron Machining
Diameter : 0.1 mm - 1.5 mm
Length: 30, 40, 45, 50, 60 mm
... preparation of deep holes. Available in diameters of 0.1 mm to 1.5 mm (.0039ˮ to.0591ˮ) (drill Ø 0.1 mm (.0039ˮ) to 0.29 mm (.0114”) uncoated, from drill Ø 0.3 mm (.0118ˮ) also coated), ...
Mikron Machining
Diameter : 0.1 mm - 3 mm
Length: 60, 50, 45, 40, 30 mm
... mm (.0039ˮ to .118ˮ) (drill Ø 0.1 mm to 0.29 mm (.0039ˮ to .0114”) uncoated, from drill Ø 0.3 mm (.0118”) also coated), usable lengths between 2.4 x d and 8.0 x d (depending on the ...
Mikron Machining
Diameter : 3 mm - 20 mm
Length: 62 mm - 131 mm
Walter Titex DC150: Versatile and highly wear-resistant Solid carbide twist drill for ISO material groups P, M, K, N, S, H and O With and without internal cooling Shank variants for all adaptors commonly used for ...
Diameter : 1 mm - 16 mm
Length: 12 mm - 120 mm
DA110 Perform HSS drill – cost-effective in all materials. Can be used universally with various different materials Tip geometry for optimum centring accuracy Maximum accuracy on the component thanks to precision-ground surfaces
Diameter : 3 mm - 20 mm
Length: 6 mm - 160 mm
... smaller drilling diameters from 0.03-3mm (0.0012–0.118 inch) ideal for precision work in small parts. Bright and coated tools Length 6×D External coolant Multi material ...
Sandvik Coromant
Diameter : 10 mm - 60 mm
Length: 168 mm - 422 mm
... standard drill with morse taper. For drilling steel, cast steel and cast iron – alloyed and unalloyed. Highly secure against fracture. Drilling depth 6 x diameter Net weight 1.233 ...
RUKO GmbH Präzisionswerkzeuge
Diameter : 0.3 mm - 16 mm
Length: 19 mm - 178 mm
... twist drill made from heavy-duty high speed steel. The fully ground twist drill has a precise concentricity. Thanks to the split point, this drill has good centring properties and requires ...
RUKO GmbH Präzisionswerkzeuge
Diameter : 1 mm - 13 mm
Length: 34 mm - 151 mm
... standard twist drill made from heavy-duty high speed steel. The fully ground twist drill has a precise concentricity. Thanks to the split point, this drill has good centring properties ...
RUKO GmbH Präzisionswerkzeuge
Diameter : 8.2 mm - 33 mm
Length: 130 mm - 269 mm
Web thinning ≥ Ø 7.000 • relieved cone • Co-alloyed high speed steel • increased wear resistance difficult-to-machine materials • acid resist./stainless steels • spring steels, austenitic steels
Diameter : 3 mm - 16 mm
Length: 46 mm - 115 mm
• facet point grind • main cutting edge form straight • optimised cutting edge geometry structural and case hardened steels • free-cutting steels, heat-treatable steels • alloyed steels up to 1200 N/mm² • cast materials • bronze, brass ...
Diameter : 3 mm - 20 mm
Length: 62 mm - 131 mm
Web thinning ≥ Ø 3.000 • facet point grind • main cutting edge form straight • optimised cutting edge geometry structural and case hardened steels • free-cutting steels, heat-treatable steels • alloyed steels up to 1200 N/mm² • cast ...
Diameter : 3 mm - 20 mm
Length: 9 mm - 100 mm
... generation of AlCr-based coating for general-purpose drill bits, which has excellent wear resistance, heat resistance, and meltability resistance; 2. Adopting a new groove shape, reducing ...
Diameter : 0.75 mm - 3 mm
VHM-EF-Drill-Micro-STEEL-6xD-HA-IK-2FF-TIALN twist Drills Solid carbide twist drill EF-Drill-Micro, 6xD in STEEL geometry for use in steel, cast iron and non-ferrous ...
EMUGE-FRANKEN
Diameter : 2.8 mm - 20 mm
VHM-EF-Drill-VA-DIN 6537L-HA-IK-2FF-ALCR-T37 twist Drills Solid carbide twist drill EF-Drill, DIN 6537L in VA geometry for use in stainless steel materials. Product ...
EMUGE-FRANKEN
Diameter : 2.8 mm - 19 mm
VHM-EF-Drill-STEEL-DIN 6537K-HA-IK-4FF-TIALN-T14 twist Drills Solid carbide twist drill EF-Drill, DIN 6537K in STEEL geometry for use in steel, cast iron and non-ferrous ...
EMUGE-FRANKEN
Diameter : 2.48 mm - 12.7 mm
Length: 60 mm - 102 mm
... reduced cost-per-drilling. The material specific properties of the cutting edge results in optimum drilling quality. Reference to variants for drilling fiber compound materials made of CFK, GFK and aramid ...
Stack drilling with LMT Belin One-shot Drills in Sandwich PCD or diamond coated carbide This type of tool is primarily dedicated to aerospace customers. For riveting of CFRP structural components, ...
CFRP “W-Point” Drill Eliminates Problems of Fraying and Delamination Drilling in CFRP can be difficult because three major considerations have to be addressed to successfully produce a clean cut: ...
Diameter : 0.5 mm - 12.3 mm
Length: 28 mm - 205 mm
Drills 2 flutes DIN338. Recommended applications: steel, cast iron. Acceptable applications: stainless steel, non ferrous, hardened steels < 50 HRC. This product can be customized according to specific customer requirements.
DueCi SRL
Diameter : 4 mm - 20 mm
Length: 74 mm - 153 mm
Reinforced shank straight flutes drills with through coolant 5xD,cast iron and brass application. Recommended applications: cast iron, non ferrous, light alloys. This product can be customized according to specific ...
DueCi SRL
Diameter : 0.5 mm - 2 mm
Length: 40 mm
Microdrills reinforced shank. Recommended applications: steel, cast iron, stainless steel, light alloys, hardened steels 50 HCR. This product can be customized according to specific customer requirements.
DueCi SRL
Diameter : 1 mm - 13 mm
Length: 12 mm - 151 mm
IZAR CUTTING TOOLS S.A.L.
Diameter : 1 mm - 31 mm
Length: 26 mm - 174 mm
Carmon
Diameter : 1 mm - 31 mm
Length: 26 mm - 174 mm
Carmon
Diameter : 2 mm - 16 mm
Length: 38 mm - 115 mm
Carmon
Diameter : 1 mm - 20 mm
Length: 32 mm - 104 mm
90° spotting drills developed for general machining. Usable for 45° chamfering. Can only be used on the point. TiAlN coating improves tool life in ferrous materials.
Diameter : 3 mm - 13 mm
Length: 45 mm - 137 mm
Coated carbide drill for heat-resistant alloy Carbide material is optimal for Nickel Alloys, combining excellent wear resistance with chipping resistance. Flute geometry combines cutting performance ...
NACHI America
Diameter : 1 mm - 20 mm
Length: 38 mm - 130 mm
NC Spot Drills 120° Design with double drill tip angle to enhance the strength of drill tip. Apply with AlTiN coating to increase wear resistance and tool ...
Diameter : 3.18 mm - 6 mm
Length: 33 mm - 60 mm
CNC engraving bit-single flûte (acrylic only) CNC engraving bit—2 flûtes V point & single flûte engraving bit CNC engraving bit-two flûtes (acrylic only) CNC engraving ...
Diameter : 0.2 mm - 3 mm
Length: 38, 50 mm
... high-precision micro-drills and whirlers complete our offering by providing solutions for all levels of your product manufacturing, with a wide range of coatings for all types of materials. Our range of NC centerers, ...
Diameter : 3.1 mm - 6 mm
Length: 50, 60 mm
... high-precision micro-drills and whirlers complete our offering by providing solutions for all levels of your product manufacturing, with a wide range of coatings for all types of materials. Our range of NC centerers, ...
Diameter : 0.4 mm - 6 mm
Length: 42 mm - 75 mm
... guarantees optimal cost-effectiveness when drilling. The best drill bit for steel, CrazyDrill Steel, is available from stock in the diameter range of 0.4 mm to 6.0 mm (.016” to .236”). The standard drilling ...
Diameter : 6, 10, 8 mm
Length: 12 mm - 30 mm
... - 9/9/14 - Shank Diameter(mm) - 6/8/10 Step Thickness(mm) - 5/3/4 - Dimension of Each Step(mm) - 4-12/4-20/4-30 Coating - TiN Coating - Set Content - G-STP9-4-12, G-STP9-4-20, G-STP14-4-30
Almost infinite flexibility in drill point geometry – Significantly increased wear resistance over traditional coated carbide drills – Tool life more than 10* times longer tungsten ...
elementsix
Diameter : 2 mm - 12 mm
Length: 60 mm - 365 mm
... margin Realizes high-efficiency drilling in both environment-friendly MQL machining and internal lubrication machining 01 TH coating with excellent stability even at high temperatures It is a ...
MOLDINO Tool Engineering Europe GmbH
Diameter : 4 mm - 20 mm
Length: 75 mm - 334 mm
... Beyond four-margin long-length drills with through coolant. Application-specific SC drill for deep-hole applications without pilot drill in steel, cast iron, and stainless steel materials. 12 ...
Kennametal
Diameter : 6.8 mm - 21 mm
Length: 88.1 mm - 128.8 mm
... addition to standard drilling applications,the revolutionary self-clamping CHAMDRILL mechanism is an excellent solution for special drilling requirements. Pre-thread hole drilling is ...
ISCAR Tools
Diameter : 5 mm - 14 mm
Seco Feedmax SD245A solid carbide drills bring high levels of stability and overall improved machining performance to holemaking applications with irregular exits and cross-hole interruptions. These drills ...
SECO TOOLS
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining