Enerpac industrial pumps

Pressure: 51.7, 34.3 MPa
Power: 596, 373, 969, 745, 1,193 kW
Length: 3,639 mm - 5,475 mm

Mud pump is used to circulate drilling fluid while drilling, it is the core part of drilling fluid circulation system, and it is composed of power end and fluid end. The products conform to API Spec 7k standards, and ...

Output diameter: 60.3 mm - 88.9 mm

... -salt pump, through bridge pump, deflecting well pump, anti-powdered coal pump and so on special well oil pump. Technical Features 1. The pump ...

Flow: 50 l/min
Pressure: 360 mbar

• Extreme compactness and solidity • High efficiency (up to class A ++) • Integrated heating element • Pressure: 360 mBar – Flow rate: 50 L / min Applications • Domestic and professional dishwashers

Power: 20 W - 400 W

• Asynchronous and brushless motors for rotary vane pumps (flow rates 50-350 l/h) • Low vibrations and noise • Compatible with magnetic drive pumps or mechanical drive pumps ...

Flow: 1,000 m³/h
Pressure: 10 bar
Head: 295'00"

The DIN-FOOD pump is a hygienic high capacity centrifugal pump (up to 1000 m³/h) designed to cater for an unfulfilled need in the food-processing and chemical and pharmaceutical industries. The applications ...

Flow: 0.6 m³/h - 158.9 m³/h
Pressure: 0 bar - 16 bar
Fluid temperature: -10 °C - 140 °C

... designed lobes. The pump is authorized to carry 3-A symbol. Note: Consult the options of the pumps authorized to carry 3-A symbol. The SLR pump is a bare shaft rotary lobe pump. ...

Flow: 2.4 m³/h - 45 m³/h
Pressure: 12, 6 bar
Fluid temperature: 85 °C

Kiber KS progressive cavity pumps are used to transfer products of low and high viscosity as well as products containing soft particles. They are also recommended for use with edible oils, wine, concentrates and beverages ...

Flow: 55, 71, 87 l/min
Head: 23, 16, 10, 7 m
Power: 450, 250 W

... ventilated universal motor. The lightweight, handy and powerful device can be used as drive for the pump tubes of the laboratory and drum pumps and is useful in this combination for many thin fluid, ...

Flow: 82, 61 l/min
Head: 9, 20 m
Power: 460 W

... aggressive vapours of acids and alkalies are present. The standard in the on/off switch integrated low voltage release is intended to prevent an uncontrolled start of the drum pump motor after a power ...

Flow: 55, 66 l/min
Head: 7.5, 15 m
Power: 400 W

The drum pump motor JP-164 is a compactly built, not explosion-proof, internally ventilated universal motor, that has proven itself for slightly viscous media as diesel in agricultural field and at fire brigades foaming ...

Power: 17.6 kW
Length: 1,130 mm
Width: 740 mm

... rate, high-quality seals and an automatic low-oil shut-off system. All of our ENDRESS motorised pumps are self-feeding suction pumps based on the centrifugal pump principle and are driven ...

... saving - More hygienic pump - Fully drainable - Semi-open impeller. - Greater efficiency - Volute casing - Up to 800 cP - Design that complies 3A and EHEDG standards - Same footprint of a QC+ Pump Advantages QIS ...

Flow: 0 l/min - 4,656 l/min
Pressure: 0 bar - 20 bar

The QTS is a twin screw pump, 100% sanitary use and ideal as a CIP and Process pump, which reduces time and maintenance costs Certifications: 3-A, FDA and EHEDG Characteristics - Self-priming - ...

Pressure: 0 bar - 25 bar

... faster unloading - Accurate metering - Quieter operation - Electric drum QTS pump  provide a substantial increase in efficiency over less efficient air-operated pumps - Constant flow - Handling ...

Flow: 1.2 l/h - 35 l/h
Pressure: 0 bar - 10 bar
Power: 33, 20 W

... pressure strokes. Solenoid diaphragm pumps consists of the follwowing (main) components: Drive housing with solenoid Elektronics with connection on the control panel Built-in pump ...

Flow: 0.5 l/min - 12 l/min
Pressure: 20 bar
Power: 1.8 kW

The m-tec speedy-MP is an easy-to-handle pump for processing soft materials or pumpable products such as structured or decorative renders with a granularity of up to 2 mm. It is mainly used to pump creative ...

Flow: 3 l/min - 22 l/min
Pressure: 30 bar
Power: 4 kW

The m-tec P20 is a compact pump for processing soft materials or pumpable products with a granularity of up to 4 mm. The P20 is mainly used to pump basic, decorative, synthetic resin ...

Flow: 3 l/min - 24 l/min
Pressure: 30 bar
Power: 4 kW

... m-tec m-tec pump is the perfect entry-level model for the automation and automation and 3D printing sector. Advantages Easy adaptation to different materials due to infinitely variable power control Problem-free ...

Flow: 66 l/min
Pressure: 1.5 bar - 2.8 bar
Head: 34, 45, 53 m

Self-priming centrifugal multi-stage pump For pumping rainwater out of storage tanks Rubber feet to suppress pump vibration and noises Integrated stainless-steel dirt trap Suction end with 1“ nozzle Optionally ...

The archimedean screw pump is suitable for the lifting of water and sludge in civil or industrial wastewater treatment plants. The main characteristics of its operation are the big flow ...

Flow: 20 m³/h - 180 m³/h
Pressure: 20, 25 bar

When developing this exceptional pump, we intended to set new standards in double-screw technology. We started by rethinking functional principles from the ground up and eliminated previously known deficiencies typically ...

Based on the proven centrifugal pumps of the Fristam FP range, the shear pump has a new, efficient mixing method. A rotor/stator system which operates at tip speeds of up to 38 m/s is utilized instead ...

Flow: 0 m³/h - 80 m³/h
Pressure: 0 bar - 15 bar

The FZ series, manufactured by Fristam Pumpen, is a centrifugal pump that offers comprehensive results for high suction operations. his device runs with a 15 bar system pressure and a 6.5 bar discharge pressure. Furthermore, ...

Flow: 15 m³/h - 18 m³/h

... varies depending on the type of auger pump installed. The 7515 up to a maximum grain size of 8 mm conveys up to 15m3/h. With the 2L8 auger pump (up to 12 mm grain size) speeds of up to 18m3/h can be reached.The ...

Lobe Pumps The volumetric roots pumps Bora – BA series are equipped with three lobe rotors having a singular geometrical shape that emphasizes the positive aspects of this design and annulling the negative ...

Claw Pumps The new PA.155 Claw pumps create air volume and transfer it through the intake duct to the outlet duct by means of the rotation of two claw shaped rotors in a moulded chamber. The dry running ...

Power: 0 kW - 150 kW

CENTRIFUGAL PUMP (NM) ASV Stubbe produces pumps for aggressive or corrosive liquids. We offer an extensive product range of horizontal or vertical pumps made of the most resistant materials ...

Flow: 10 m³/h - 30 m³/h
Pressure: 12 bar
Power: 5.5 kW - 11 kW

The “Dragon ME” series represents the evolution of the Dragon piston pumps series with the addition of the membrane unit in case of pumping highly abrasive liquids. Flow ranges: from 20 to 30 mc / h - in single mode ...

Flow: 10 m³/h - 60 m³/h
Pressure: 12 bar
Power: 5.5 kW - 11 kW

... under control. Flexibility of use and structural strength. In order to achieve these results the pumps had to be equipped with a proportional hydraulic pump, capable of constant power adjustment and ...

Flow: 249.88 m³/h - 931.21 m³/h
Pressure: 175 psi

Clear Liquid Pumps Cornell’s clear liquid pumps are known around the world as the most durable, most reliable, highest efficiency pumps in the industry. They can be found in a variety ...

Flow: 4.54 m³/h - 36.3 m³/h
Head: 80'00", 130'00"

Edge End Gun Booster Pumps 2C-Corrections-ClippedCornell’s EDGE™ End Gun Booster pump for Center Irrigation Pivots are designed as a retrofit for pivot systems. The competitively-priced 3HP and 5HP End ...

Flow: 68.1 m³/h - 823.3 m³/h
Pressure: 175 psi

Cyclone Vertical Turbine Pumps Cornell Pump’s VT pump series (Cyclone) relies on our demonstrated superior hydraulics, in a submerged design. The proven quality of Cornell RB series ...

Flow: 0 l/h - 0.06 l/h

... to 1500 mL/hr (60 mL syringe) Pumps continuously until you stop the pump Infusion rate can be changed while pumping Syringe purge mode Power failure mode allows pump ...

Flow: 0 l/h - 1.451 l/h

Six Channel Programmable Syringe Pump Description: Holds 2, 4, or 6 syringes of up to 140 mL each All syringes operate in sync. Independent syringe operation, including "Push-Pull", available with the Dual Pump ...

Flow: 0 l/h - 2.1 l/h

Programmable OEM Syringe Pump Computer controllable: networkable up to 100 pumps Stand-alone operation: pre-program the pump with a dispensing program, then operate the pump ...

The external gear pump with innovative hygiene concept Dead space free and maintenance free. The rinsing concept ensures maximum hygiene and optimized cleaning cycles. The selected materials guarantee a long service ...

Pressure: 700 bar

• Easy to carry – Made of aluminum. • Ergonomic – Easy grip pump lever and relief knob. • High Speed – The pumps have 2-step function that automatically switches between high speed and high pressure. • ...

Pressure: 1,000, 1,500, 2,800 bar

... tensioner. • Oil reservoir in aluminum and valve made in steel (AHP705 and UHP2800). • Ergonomic – Easy grip pump lever and relief knob. • The pumps have a 2-step function that automatically switches ...

Pressure: 700 bar

AIR OPERATED HYDRAULIC PUMPS, 700 BAR • Can be operated by hand or foot. • When operating with foot you get both hands free to hold the tool, (nut splitter, puller, cylinder etc) which is a great advantage ...