EPHYMESS explosion-proof temperature sensors

Temperature: -50 °C - 200 °C

... supply line is connected with the measuring winding with strain relief in a 2, 3 or 4 wire circuit. The temperature is measured along around 2/3 of the sensor length.

Temperature: -50 °C - 200 °C

• Fully shielded design (sensor and measuring line) • Where space is limited, the grounding and shielded measuring line are positioned opposite (special implementation) • Current load capacity of shielding ...

Temperature: -50 °C - 200 °C

... thermometer • Choice of platinum, copper or nickel measuring winding • Resistant to vacuum impregnation • IECEx and ATEX approvals for use in explosive areas • TR certificate for Eurasian customs union In ...

Temperature: -50 °C - 200 °C

• Highly flexible construction with excellent adaptation to slot unevenness • Very low installation heights possible from approx. 1.2 mm thickness • Simple, low-cost setup In an NWT-FLEX, an insulated platinum wire is ...

Temperature: -65 °C - 200 °C

• Measuring resistor sealed in epoxy intermediate slider housing (ZS) • Very stable design • For installation directly in the slots of electrical motors/generators • Can be adapted to almost any slot dimensions The ...

Temperature: -50 °C - 200 °C

... in the slots of electrical motors/generators • Can be adapted to almost any slot dimensions In this temperature sensor, the basic sensor is connected directly to the feed line ...

Temperature: -60 °C - 180 °C

... (KS) and sealed. Thanks to the outstanding electrical properties of the carrier material (PESU mould carrier), no further sensor insulation is necessary up to a high voltage strength of 3.5 kV.

Temperature: -70 °C - 260 °C

... for the head. They are often used to monitor the bearing temperature of electric motors, generators or large pumps and are therefore also available in an approved Ex version as per IECEx and ATEX (ignition ...

Temperature: 400 °C - 600 °C

... effective in the gears of wind power plants. The advantage of elastic temperature sensors lies in their continuous contact pressure and the associated stable thermal coupling with the ...

Temperature: -70 °C - 260 °C

... ensures high operating safety where vibrations or mechanical loads occur and guarantees outstanding thermal coupling under expansion caused by temperature. Versions with angled feeds are also available. ...