Essentra Components pipe plugs

Diameter: 50, 45, 80 mm

HOSE PLUGS • 45 mm and 50 mm diameters are suitable for 60 mm hose socket

Operating temperature: -20 °C - 120 °C

- Whitworth pipe thread DIN ISO 228 - Chambered O-ring - With hexagon socket - Seals FPM - Material with media contact: Brass, dezincification resistant - Temperature range: -4 to 248 °F (-20 to +120 °C) - Working pressure ...

Diameter: 54 mm - 110 mm

... for electrostatic bonding in the pipe to ensure the electrostatic conductivity of the whole pipe; • suitable for conducting electrostatic bonding of different electric melting pipes ...

Diameter: 0.13 in - 4 in

ISIFLO threaded pipe fittings are threaded pipe fittings for use with hemp, thread tape or threat paste. Available in dimensions from 1/8 "up to 4" ISIFLO thread fittings are produced in dezincification-resistant ...

Diameter: 2.5 mm - 25 mm

Our blanking plug of PE has been designed for protecting holes and finishing. It can be used as a glider for ending tubes. If you don't find the size you are looking for, visit our gliders group LGL.

Diameter: 0.13, 0.25, 0.38, 0.5 in

Maintenance of equipment in the factory and the installation process,often need different types and pipe joints,pipe joints made from brass,nickel-plated. Thread meets ISO 7 (BSPT), ISO 228 (BSPP), and ...

Diameter: 2.95 mm - 4.62 mm

Tapered Plugs from Sinclair & Rush. Our Tapered Plugs, also known as T-Plugs are a popular way to close off openings to protect from ingress of dirt, dust or moisture and can be used ...

Diameter: 8 mm - 100 mm
Operating temperature: 200 °C

Cast Iron Pipe Fittings Galvanized Plug Beaded Maximum Pressure: - 25 BAR (363PSI) (2.5MPA) CLASS 150 Tensile Strength: - 350MPA Suitable Applications: - Water, Oil, Gas, Petro-Chemical Product ...

Diameter: 0.38 in - 4 in
Operating temperature: 0 °C - 60 °C

Series of fittings designed for conveying fluids under pressure with a threaded jointing system Nominal pressure: PN 16 Standards: EN ISO 1452, EN ISO 15493, ISO 228-1

Diameter: 0.38 in - 3 in
Operating temperature: 0 °C - 105 °C

Wilson Tube Plugs offer a low-cost, quick, and efficient method of sealing leaking tubes. They are installed easily so the pressure vessel get back on line. Minimum driving is required to establish a ...

Pipe Plugs Material: LDPE (Black) Designed to Protect Metric, BSP and NPT Pipe from Damage and Contamination Pipe Plugs - Information MOCAP ...

Round caps Closure caps and caps that are used for protecting the objects from the painting Description ROUND CAPS Recommended rubber compound for this product are: SBR Styrene-Butadiene Rubber VMQ Silicone Rubber (standard)

Operating temperature: -30 °C - 70 °C

Material: PE-LD Colour: Black Working temperature: -30°C ~ +70°C D:Pipe thickness All dimensions are in mm

Diameter: 0.06 in - 1.5 in

Standard DIN906 Product category Plugs Item description Hexagon socket pipe plugs Form Material/Grade

Diameter: 50 mm - 500 mm

... protect plastic pipes. The unique design of the WR, with vertical ribs and low depth, means that the same size of plug can be used to seal both the plain and connector ends of PVC pipes. ...

Diameter: 0.13 in - 1 in

Hexagon socket pipe plug with conical thread DIN 906 made of zinc plated steel Body material: White Zinc-plated Steel DESCRIPTION Hexagon socket pipe plug with conical ...

Diameter: 4 mm - 965.2 mm

CAP FOR PIPES AND FITTINGS MATERIAL PE-LD (Low density polyethylene) COLOUR Natural NOTES Available in other colours and with ventilation hole. The top can be customized.

Diameter: 0.38 in - 1.5 in

Tube plugs are designed for sealing off leaking or damaged tubes in heat exchangers, condensers, boilers etc.It ensures a uniform joint without damaging the tube sheet.

Plugs for obstruction of defective tubes on condensers, HP/LP heaters, exchangers, coolers and evaporators. Modular and qualified according to the application and required dimensions. Specialy used ...