Flow: 50 l/min
Pressure: 360 mbar
• Extreme compactness and solidity • High efficiency (up to class A ++) • Integrated heating element • Pressure: 360 mBar – Flow rate: 50 L / min Applications • Domestic and professional dishwashers
Flow: 36.2 l/min
Pressure: 35 bar
Fluid temperature: 60 °C
Electric motor pump assembly. AR 30 BlueFlex™ EM . Integrated control unit (GI 40).
Flow: 0 l/min - 100 l/min
Pressure: 7 bar
Head: 70 m
The curves and performances refer to pumps with submerged suction line and resistance-free discharge side outlet with water at 20 ° C and vary depending on the material.
Dr. Jessberger GmbH
Flow: 8 l/min
Pressure: 6 bar
Head: 60 m
The curves and the performance values refer to pumps with submerged suction and a free delivery outlet with water at 20°C and vary according to the construction material.
Dr. Jessberger GmbH
Flow: 20 l/min
Pressure: 7 bar
Head: 70 m
The curves and the performance values refer to pumps with submerged suction and a free delivery outlet with water at 20°C and vary according to the construction material.
Dr. Jessberger GmbH
Power: 17.6 kW
Length: 1,130 mm
Width: 740 mm
... rate, high-quality seals and an automatic low-oil shut-off system. All of our ENDRESS motorised pumps are self-feeding suction pumps based on the centrifugal pump principle and are driven ...
Flow: 66 l/min
Pressure: 1.5 bar - 2.8 bar
Head: 34, 45, 53 m
Self-priming centrifugal multi-stage pump For pumping rainwater out of storage tanks Rubber feet to suppress pump vibration and noises Integrated stainless-steel dirt trap Suction end with 1“ nozzle Optionally ...
... archimedean screw pump is suitable for the lifting of water and sludge in civil or industrial wastewater treatment plants. The main characteristics of its operation are the big flow clearance ...
• Magnetic drive pump made of plastic material • Closed or open impeller pump in AISI304 or AISI316 • Connectors in PP, PVC, PVDF • Pumps with membrane in plastic material or steel
Flow: 42 l/min - 129 l/min
Pressure: 500, 400, 320 bar
Power: 0 kW - 75 kW
HFA/HFC fluids Non-oily water/clear water Mine water Industrial water Descaling water Neutral fluids with a viscosity of 0.5 – 4.0 mm²/s
Hauhinco
Flow: 201, 167, 266, 221, 278 l/min
Pressure: 160, 210 bar
Power: 0 kW - 75 kW
HFA/HFC fluids Non-oily water/clear water Mine water Industrial water Descaling water Neutral fluids with a viscosity of 0.5 – 4.0 mm²/s
Hauhinco
Flow: 103 l/min - 163 l/min
Pressure: 365, 575, 465 bar
Power: 0 kW - 110 kW
HFA/HFC fluids Non-oily water/clear water Mine water Industrial water Descaling water Neutral fluids with a viscosity of 0.5 – 4.0 mm²/s
Hauhinco
Flow: 7 l/min - 40 l/min
Pressure: 2 bar - 8 bar
Input diameter: 90, 80, 48 mm
The full-flow pumps of the TF series for wells produced by DIMACO S.a.s., make it possible to operate without need to external controls or sensors. The pumps are in fact able to check inside the fluid ...
Cast iron pump pushes 500 litres per minute, debris up to 3mm, and a total head of 50m. Maximum output capacity (L/min) - 500 Inlet/outlet diameter thread type (mm/inches) - 50/2-PF Total head (m) - 50 Suction head ...
Flow: 0 l/min - 15 l/min
Pressure: 35 psi - 60,000 psi
Power: 37 kW
... waterjet. It gives waterjet life. APW A16 intensifier pump is a miracle and it realizes the dream of every waterjet users whoever used, maintained or researched waterjet. APW waterjet ...
Flow: 0 l/min - 15.1 l/min
Pressure: 35 psi - 60,000 psi
Power: 37 kW
... for stopping to repair the pump. It increases the working efficiency and achieves the non-stop operation goal. A16B Pump System Parameter Power: 50hp (37kw) Max. Cutting Pressure: 60000PSI (413.685MPa) ...
Flow: 0 l/min - 15.1 l/min
Pressure: 35 psi - 60,000 psi
Power: 75 kW
A16*2 Pump Performance APW waterjet A16*2 pump is the New Generation of waterjet pumps, which is powered by high-pressure waterjet ...
Flow: 1 m³/h - 337 m³/h
Pressure: 0 bar - 16 bar
Head: 1 m - 99 m
Volute casing pump for horizontal or vertical installation, back pull-out design, single-stage, with ratings to EN 733, radially split volute casing, replaceable casing wear rings, volute casing with integrally cast pump ...
KSB
Flow: 0 l/h - 2,460 l/h
Pressure: 17.2 bar
Applications: Water and Wastewater Chemical metering such as Sodium Hypochlorite, Alums, Ferric Chloride, Hydrofluorosilicic Acid, Methanol, Polymers, Sodium Bisulfite, Sodium Hydroxide, Sulfuric Acid. Details: ...
Tuthill
Flow: 3.6, 3 l/min
Pressure: 102, 71 mbar
Fluid temperature: 0 °C - 95 °C
This pump is designed for dispense. The use of the pump allows for flexible siting of dispense valves inside the machine, including up to approx. 0,4 metre (15,7 inch) above the water ...
A. u. K. Müller
Flow: 20 us gal/min
Fluid temperature: -40 °C - 95 °C
Weight: 6.7 lb
... Transportation product is the SLP. This sealless pump is SAE J1939 CAN enabled and incorporates a brushless DC motor with a 40,000-hour-operational life and quiet-running, wet-rotor design. The pump’s ...
AMETEK Dynamic Fluid Solutions
Flow: 3 l/min
Flow rates from smaller than 1 ml/min up to 3 l/min Pressure up to 2 bar 7 tube dimensions from 0.5 mm up to 8.0 mm inner diameter
Gardner Denver Thomas
Flow: 4.1 l/min
Pressure: 4,100 bar
Power: 37 kW
The HERO 50 Waterjet Intensifier Pump, with Jet Smart Controls sets a new performance standard for UHP Intensifier pumps. Dependable and easy to maintain, the HERO 50 can cut and trim ...
JET EDGE
Flow: 3 l/min - 12 l/min
Pressure: 0 psi - 50 psi
Head: 22'00"
... who are unable to fulfill their unique pump specifications with an off-the-shelf solution and require a custom-engineered pump specific to their application. Please click the "Pump ...
Gorman-Rupp Industries
Flow: 0 l/min - 2.5 l/min
Pressure: 0 psi - 2,700 psi
Weight: 1 kg
... mainstay pump in the industry for decades, the reputation of Fire-Ball is unrivalled. Built to withstand the test of time with fewer moving parts, our flagship pump is built to extend uptime so customers ...
GRACO
Flow: 40 m³/s
... cooling pumps feature a simple configuration with minimal components and enhanced corrosion-resistant features. Our expertise Suited for plants worldwide GE’s circulating water pumps ...
GE Steam Turbines
Flow: 0.14 l/min
Pressure: 0.7 bar
Head: 8 m
... Extremely high performance from a compact unit, self primes up to 8m. • Unique reinforced diaphragm provides 10 times the service life of a peristaltic pump. • Self priming and reversible pump ...
CHARLES AUSTEN PUMPS LTD / BLUEDIAMOND PUMPS INC
Flow: 0 l/min - 0.7 l/min
Pressure: 30 psi
Fluid temperature: 5 °C - 50 °C
Parker’s LTC Miniature Diaphragm pump is a compact versatile pump with the option of a brush or brushless DC motor drives that can be configured for specific requirements ...
Flow: 6,360 m³/h
Pressure: 1,965,000 Pa
Head: 107 m
... the stuffing box and impeller. At startup, the repeller functions like an impeller and pumps liquid from the stuffing box. When the pump is shut down, a conventional ...
Goulds Pumps
Flow: 0 l/min - 2,500 l/min
Head: 15 m - 29 m
Power: 2.1 kW - 9.6 kW
... These small portable pumps are made for tough applications and excels when it comes to pumping sludgy water or water with large solids. Despite its extreme ruggedness, ...
Atlas Copco Construction Tools
Flow: 9,000 m³/h
Pressure: 40 bar
Head: 190 m
... back to the pump at the same time. Thus, operating as processes pumps, they cover a wide range of applications in the pulp and paper, mining, offshore, power, food, and chemical industry. Additionally, ...
ANDRITZ
Please specify:
Help us improve:
remaining