- Hydraulics - Pneumatics >
- Pump >
- Suction pump >
- Gardner Denver
Gardner Denver suction pumps
Flow: 1 m³/h - 16 m³/h
Head: 10.2 m
The product has a pump body, impeller, cap and suction grid made with technopolymer. The motor and screws are made of stainless steel, with the triple O-ring seal is interposed with oil precombustion ...
DAB
Flow: 0 us gal/min - 5 us gal/min
Length: 191 mm
Width: 139 mm
... AODD) pump. Engineered with original equipment manufacturers (OEMs) in mind, this AODD pump provides tremendous system flexibility as well as: Dual-threaded manifolds that are threaded both internally ...
Flow: 0 us gal/min - 123 us gal/min
Length: 471 mm
Width: 310.29 mm
... excellent flow rates. The Versamatic 1 ½" pump is the performance leader in flow rate at 123 gpm (465 lpm), displacement per cycle and dry suction lift. Additionally, this pump: ...
Flow: 0 us gal/min - 170 us gal/min
Pressure: 7 bar
Length: 742, 754 mm
... clog other pumps, this unique pump has been engineered to fully function in any position. This plastic solids handling AODD pump is also configured to provide a longer service life ...
Flow: 112 m³/h - 10,800 m³/h
Head: 8.5 m - 140 m
Series HFXS pumps are a kind of wear resistance single-stage double-suction centrifugal pumps with horizontal split-case. And it is our new products for delivering the liquid containing ...
Flow: 5, 2.7, 1.3, 0.9, 2 m³/h
... Semi-rotary manual pumps equipped with flexible PVC hose Descriptive Construction materials Body: cast iron Mechanism: brass Waterproofing: by graphite braid. NBR flange O-ring, ...
Pompes Japy
Flow: 0.9, 2, 1.3, 2.7 m³/h
Semi-rotary manual pumps equipped with a flexible PVC hose Descriptive Construction materials Body: cast iron Mechanism: brass Waterproofing: by nitrile O-ring. NBR flange ...
Pompes Japy
Flow: 1.3, 2 m³/h
Semi-rotary manual pumps equipped with a flexible PVC hose Descriptive Construction materials Body: cast iron Mechanism: zamak Waterproofing: by nitrile O-ring (not suitable for ...
Pompes Japy
Flow: 0 m³/h - 15.6 m³/h
Head: 0 m - 16 m
Power: 1.1 kW
CTV 25-11 PLASTIC CTV 25-11 is a 1" vertical pump in PP or PVDF with 1.1 kW motor, capacity of 15.6 m3/h and max head of 16 m. Performance curve The performance curves are based on water at 20°C. Other circumstances ...
Flow: 0 m³/h - 51 m³/h
Power: 2.2, 4, 5.5, 7.5 kW
... self-priming centrifugal pump, manufactured from AISI 316L stainless steel.The self-priming feature allows to use the pump in applications where standard CT pumps do not prove useful. ...
Flow: 18 m³/h - 60 m³/h
Head: 25, 20, 30, 19 m
Power: 2.2, 3.7 kW
... a heavy-duty sludge pump made in cast iron, employing the SB series as its base. On SBA an agitator is provided to assist smooth suction of the pumped fluid. The side-flow, top-discharge design keeps ...
Flow: 0.00012 l/h
Pressure: 200 mbar - 2,200 mbar
Fluid temperature: 0 °C - 60 °C
- Peristaltic pump for wall or front-panel mounting - Reliable condensate removal - Self-priming: pump creates a suction force to draw liquid upwards - With return stop - Rotational speed: ...
Flow: 0.3 l/h
Pressure: 200 mbar - 2,200 mbar
Fluid temperature: 5 °C - 50 °C
- Explosion-proof version according to ATEX for zone 1 - Peristaltic pump for wall or front-panel mounting - Safe condensate removal - Self-priming: pump creates a suction force to draw ...
Flow: 30 m³/h - 2,500 m³/h
Pressure: 12 MPa - 50 MPa
Head: 15 m - 130 m
... It is mainly composed of a motor, pump shell, impeller, guard plate, pump shaft, bearing seals, etc. 2. Unique mechanical seal device to protect the motor from high-pressure water and impurities, ensuring ...
Relong Tech
Flow: 950 m³/h - 1,300 m³/h
Head: 20 m - 65 m
Output diameter: 250, 350, 300 mm
RLSDP dredge pump is a new type of sludge pump researched & manufactured by our company basing on International (Warman) Gravel Pumps, aiming at rivers and seas out of repair. RLDSP dredge ...
Relong Tech
Flow: 1,500 m³/h - 2,200 m³/h
Head: 20 m - 65 m
Output diameter: 300, 350, 400 mm
RLSDP dredge pump is a new type of sludge pump researched & manufactured by our company basing on International (Warman) Gravel Pumps, aiming at rivers and seas out of repair. RLDSP dredge ...
Relong Tech
Flow: 0 m³/h - 1,800 m³/h
Pressure: 16 bar
Head: 0 m - 160 m
Taking end suction pumps to a new level The Lowara e-NSC end suction pumps combine high efficiency with high flexibility regarding installation, material options and ...
LOWARA
Flow: 0 us gal/min - 26,000 us gal/min
... distribution network, this pump offers the reliable service and rugged engineering you expect from the world’s leading water technology company. More efficient: each model has been optimized to balance efficiency and ...
Jabsco
Flow: 22 l/h
Pressure: 15 bar
... a wide range of applications, thanks to several functions included in the same pump, even with few models. Common features for every model: • Foot mounted dosing pump • Corrosion-proof reinforced ...
Flow: 0.08 l/h - 150 l/h
Pressure: 1.7, 1 MPa
Power: 62 W
... dosing at any flow rate whilst the motor regulates discharge and suction speeds to achieve high accuracy (+/-1%) all with a cost effective design from a mechanically driven diaphragm pump. *Some low ...
IWAKI
Flow: 0 us gal/min - 4,000 us gal/min
Pressure: 0 psi - 175 psi
Head: 0'00" ft - 560'00"
The Series e-1510 base mounted end suction pumps deliver the highest efficiencies, performance and durability. All pumps feature stainless steel impellers and an expanded efficiency island ...
Bell & Gossett Domestic Pump
Flow: 500 us gal/min - 28,000 us gal/min
Pressure: 175 psi - 300 psi
Head: 30'00" ft - 530'00"
... Double-Suction Split-Case Pump has maintenance-free bearings, one-piece unitized Seal, groutless base plate, alignment-friendly coupling, reduced pump room footprint by up to 40% when ...
Bell & Gossett Domestic Pump
Flow: 0 us gal/min - 6,500 us gal/min
Pressure: 0 psi - 400 psi
Head: 0'00" ft - 600'00"
... at temperatures up to 250°F (121°C). The pump internals are capable of being serviced without disturbing piping connections or electrical motor connections. Double-suction, base-mounted Series HSC-S ...
Bell & Gossett Domestic Pump
Flow: 600 m³/h
Pressure: 16 bar
Power: 200 kW
ECW series are single stage, end suction, back pull out, top centreline discharge type. These are offered with different material of construction to handle clear and slight raw water. Dynamically balanced impeller ensures ...
C.R.I. Pumps
Flow: 550 m³/h
Pressure: 550 bar
Head: 95 m
Close coupled single stage, end suction centrifugal pumps in which the pump shaft will be directly coupled with standard induction motor by means of stub or split coupling. Close coupled ...
C.R.I. Pumps
Flow: 4,200 m³/h
Pressure: 16 bar
Head: 170 m
Horizontal Split Case single stage double suction centrifugal pumps are designed to deliver higher rate of flow at designed operating head. Double suction impeller with between bearing ...
C.R.I. Pumps
Flow: 70 l/min - 600 l/min
Head: 0 m - 30 m
Power: 1.5 kW - 4 kW
... chemical process pumps With the MXM series a new generation of mag. drive chemical pumps complete the line-up of our world wide proven process pumps. By the non contact system in conjunction ...
IWAKI Europe GmbH
Flow: 0.0075 l/h - 45 l/h
Pressure: 4 bar - 17 bar
Power: 17 W - 19 W
... comparable metering pumps. Resistance The combination of the non-elastomeric, durable PTFE diaphragm with outstanding permeation characteristics and the PVDF pump head ensures best chemical resistance. ...
IWAKI Europe GmbH
Flow: 2.3 l/h - 25.2 l/h
Pressure: 0 Pa - 1,400,000 Pa
Power: 20 W - 24 W
... metering pumps with precise flow monitoring, feedback & control The EWN-Y electromagnetic pump combined with EFS flow sensor (option) provides accurate real time control & display of dosing rate. The ...
IWAKI Europe GmbH
Flow: 10 l/min
... Technical Specifications 12V DC Oil Pump Flow rate: 10 litres per minute Vicosity: up to 500Cst 2 Metre suction height 3/4" BSP inlet/outlet 30 Min Duty Cycle Features & Benefits Quick cleaning ...
Flow: 18 l/min
R1000T drum pump has the same performance as the R-SERIES, R1000S stub pump but with the extended suction tube included. Suits 205L drums. Technical Specifications 10:1 Ratio Pump ...
Flow: 20,000 m³/h
Fluid temperature: 80 °C
... stage, double entry, axially split casing pump Product Category: BETWEEN BEARINGS Uniglide range consists of both configured and engineered-to-order axially split, double suction..... The ClydeUnion ...
Sugar Pump - Magmo Series Product Category: MAGMO Plenty Magmo sugar pumps are designed principally to handle high viscosity abrasive sugar products, such as Molasses, Massecuite and Magma. The ellipse ...
Flow: 800 m³/h
Pressure: 20 bar
Fluid temperature: -40 °C - 200 °C
Twinro Two Screw Pumps Product Category: TWO SCREW The Twinro 2 screw pump is a positive displacement rotary twin screw pump designed for bulk transfer of liquids. It is a heavy ...
Flow: 12 m³/h
Power: 0.37, 0.25 kW
Weight: 8, 12 kg
The FL20C centrifugal pump is well known for its small size and high performance. Despite their small size, these pumps can provide flows up to 12 m3/h with good outcomes. FL20C pumps ...
Flow: 0 m³/h - 110 m³/h
Pressure: 0 bar - 40 bar
Fluid temperature: 0 °C - 120 °C
Vertical in-line pumps Vertical and multistage centrifugal pumps. The in-line design enables the pump to be installed on pipes where the suction and discharge ports ...
Flow: 1,500 m³/h
Head: 75 m
... pull-out design allows the complete rotating element to be removed from the pump without disturbing the suction or discharge piping. Fewer crafts are required to service the pump. •Flexibility ...
Alcon
Flow: 11.3 l/h - 2,400 l/h
Pressure: 200, 95, 90 bar
Fluid temperature: -20 °C - 150 °C
... the most challenging projects has led to the development of Nexa XP, a special version of Nexa able to cope with extreme suction conditions and a wide range of chemicals. Nexa XP complies with the most stringent requirements ...
Flow: 120,000 m³/h
Head: 180 m
Power: 7,350 kW
... Models WMCC and WMCE PROVEN PERFORMANCE WITH OVER 130 YEARS OF EXPERIENCE: EACH PUMP IS CUSTOM DESIGNED FOR HIGHEST EFFICIENCY AND MAXIMUM RELIABILITY Custom designing pumps for each application enables ...
FLYGT
Flow: 11.4 l/min
Pressure: 75 bar
The Unitor 10:1 Hydra-Clean chemical pump is ideal for a majority of fluid handling tasks onboard. Delivered ready to use and includes strainer, hoses, spray gun and nozzle. Pumps are designed to be mounted ...
Pressure: 16 bar
Fluid temperature: -10 °C - 60 °C
Length: 560 mm
The pump is designed to fill tanks of PR 14 type central lubrication pumps and other pumps with plastic grease. It may be used to fill other containers with plastic grease as well. Capacity ...
Flow: 2,600 m³/h
Pressure: 10, 15 MPa
Head: 300 m
... impeller radially split volute, horizontal, centerline mounted. Axial suction, radial discharge, suction and discharge flange pressure rating is the same. The axial force in the pump ...
SOURCE Pumps & SYSTEMS Co., Ltd.
Flow: 1,000 m³/h
Pressure: 5 MPa
Fluid temperature: 30 °C - 230 °C
... stage, single suction radial impeller, radially split volute. Axial suction, axial discharge, the center of suction and discharge ports are located on the same horizontal line, vertical ...
SOURCE Pumps & SYSTEMS Co., Ltd.
Flow: 2,000 m³/h
Pressure: 2.5 MPa
Head: 160 m
Single-stage radial impeller, horizontal, radially split volute, foot mounted. Axial suction, radial discharge, suction and discharge flange pressure rating is the same. Dimensions and performance meet ...
SOURCE Pumps & SYSTEMS Co., Ltd.
Flow: 0 m³/h - 1,850 m³/h
Head: 0 m - 120 m
... operating in optimal condition. The pump utilizes a flexible coupling, which allows the internal pump component to be removed without dismantling of the motor from the pump or the pump ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining