ANAKONDA RUBBER HOSE & FITTINGS ANAKONDA high wear resistant and flexible rubber hoses suitable for slurry handling are offered with custom made end fittings like ...
FILTRATE HOSE These high pressure hoses are used in tower/vertical pressure filters to feed slurry and air into the respective membrane ...
Inner diameter: 6.6 mm - 51.1 mm
Outer diameter: 13 mm - 64.1 mm
Pressure: 40 bar - 225 bar
Wire Braid Hydraulic Hose meets EN 853 1 SN, SAE 100R1 and ISO 1436 1SNR1 TubeSynthetic rubber, résistant against hydraulic fiuids (HL, HLP, HLPD, HVLP, HFA, HFAS, HFB, HFC) ReinforcementOne braid of high ...
Semperflex
Inner diameter: 9.4, 12.8, 19.5 mm
Outer diameter: 16, 19.5, 28.5 mm
Pressure: 80 bar
... supply fabric reinforced hose/ braided hose industrial robot, robotic, welding equipment, welding robot, welding gun: welding spot resistant hose, hose for dresspack ...
NORRES Schlauchtechnik GmbH
Inner diameter: 6.4, 12.7, 7.9, 9.5 mm
Outer diameter: 14.1, 21.4, 15.7, 18.1 mm
Pressure: 220, 250 bar
Application high pressure cleaning equipment Standard EN 853 1SN Inner tube synthetic rubber, durable against cold and hot water with standard cleaning agents Reinforcement ...
Inner diameter: 19 mm - 50.8 mm
Outer diameter: 32.2 mm - 681 mm
Pressure: 250 bar - 430 bar
High Pressure use for petroleum based hydraulic fluids, especially suitable for a long cycle-lifetime, very good flexibilty. Temperature: -40 ° C to +100 ° C; Outer cover: made of synthetic rubber, highly ...
Inner diameter: 6 mm - 100 mm
Outer diameter: 11.9 mm - 132.3 mm
Pressure: 0.3 bar - 167 bar
... corrosive liquids and gases for applications that involve high pressure, temperatures up to +540 °C*, vibration and flexure. Type BW673 is designed for Chlorine applications. Applicable as transfer hose ...
Inner diameter: 20 mm - 152 mm
Pressure: 15, 17, 20, 25, 30 bar
Temperature: -30 °C - 80 °C
Excellent resistant flat hose, made of rubber, double layer of polyester insert Material: Specially-formulated black nitrile rubber, double layer. Polyester thread insert, black Applications: Motopump discharge ...
Inner diameter: 5.4 mm - 22.2 mm
Outer diameter: 11.2 mm - 30.5 mm
Pressure: 52, 69 bar
The 200 series hose features a reinforced chlorinated Polyethylene (CPE) synthetic rubber liner, wrapped in a double stainless steel external braid for additional resistance to abrasion. Ideal for use ...
Inner diameter: 3 mm
Outer diameter: 7 mm
Pressure: 10,000 psi
... • Hose is hard to break and very flexible • Adapt from hose to virtually any device under test with only one connection • A corrosion resistant strain-relief on each hose ...
Inner diameter: 3 mm
Outer diameter: 6 mm
Pressure: 69,000 psi
... re-make hundreds of times without over-tightening a tube fitting • Brass or Stainless Steel connections in 1/4" or 1/8" tube fitting sizes • High pressure hoses ...
Inner diameter: 3 mm
Outer diameter: 6 mm
Pressure: 69,000 psi
... Easy! Install flexible, high pressure hoses in applications where a rigid tube puts undue stress on tube fittings. Hoses fit Swagelok, ...
Inner diameter: 4 mm - 13 mm
Outer diameter: 6.2 mm - 17.6 mm
Pressure: 28, 30, 35, 40 bar
... pneumatic hose, Temperature -10 °C to 60 °C, Hose Ø 6.2x4, PN at 20 °C max. 40 bar, Roll of 50 m, blue Flexible, high-quality, PVC hose with a smooth inner layer and ...
RIEGLER & Co.KG
Inner diameter: 6 mm - 76 mm
Pressure: 0 bar - 1,450 bar
... permanent labelling Our specialty Multispiral high pressure hoses DN6 - DN76 Waterblast hoses DN6 - DN25 up to max. 1450 bar working pressure ...
Inner diameter: 65, 52, 38 mm
Pressure: 60 bar
Temperature: -40 °C - 100 °C
SYNTHETIC DOUBLE JACKET High pressure lay flat hose Municipal and industrial high pressure hose, ideal for snowmaking operations. ...
Inner diameter: 4.65 mm - 26.62 mm
Outer diameter: 7.32 mm - 30.5 mm
Pressure: 80 bar - 276 bar
Speed Flow is manufactured from virgin PTFE resin with a double ASIS 304 stainless steel, high tensile braid to suit hydraulic fittings in high pressure applications.
XTRAFLEX NV
Inner diameter: 4 mm
Outer diameter: 8.6 mm
Pressure: 210 bar
... thermoplastic polyurethane - Type - Hydraulic high pressure hose - Hose inside diameter - 4 mm - DN - 4 mm - Hose outside diameter - ...
Inner diameter: 3 mm - 8.1 mm
Outer diameter: 7.9, 15.1 mm
Pressure: 1,500, 2,200 psi
Parker Polyflex High Pressure 2440D Hoses are developed for High and Ultra High Pressure applications. The excellent handling increases ...
Parker Polyflex Division - Europe
Inner diameter: 12.7 mm - 38 mm
Outer diameter: 20.7 mm - 47 mm
Pressure: 10, 20 bar
Long service life Wide range of dimensions Applications A versatile hose for high pressure cleaning operations and general discharge service using hot or cold water and many ...
Trelleborg Industrial Hose
Inner diameter: 6.3 mm - 25.4 mm
Outer diameter: 13.4 mm - 35.8 mm
Pressure: 8.8 MPa - 90 MPa
No-Skive braid Hose R161SN is designed for high pressure hydraulic applications in Petroleum base hydraulic and lubricating oils. temp range from -40 °C up to +100°C. Compatible with ...
Parker Stratoflex
Inner diameter: 32 mm - 203 mm
Outer diameter: 36.4 mm - 211.6 mm
Pressure: 15, 11, 20, 18, 16 bar
... bulk fuel discharge/loading, tank-to-tank transfer, offshore rig supply, drill water, drilling muds, cement, bulk powder, high pressure bypass, and drinking water transport (NSF approved versions). ...
Inner diameter: 9.5 mm - 52 mm
Outer diameter: 21 mm - 71.5 mm
Pressure: 0 bar - 420 bar
Application：suitable for using oil base hydraulic oil of the hose Tube：the hose consists of a layer of heat-resistant synthetic rubber inner rubber layer Reinforcement：ultra-high ...
Luohe Letone Technology Co., Ltd.
Inner diameter: min 2.5 mm
Outer diameter: min 4.0 mm
... workplace where environment temperature is too high (>55 ℃) or full with chemical gas, because it may lead to a hose soften and the pressure of resistance drop dramatically. 3.Please ...
Inner diameter: 51 mm
Outer diameter: 72 mm
Pressure: 10,000 psi
... Cementing hose assembly was successfully certified to API 7K-FSL 0-TRange III in January 2020. The ultra-high abrasion resistant tube is specially formulated to guarantee long service ...
ALFAGOMMA
Inner diameter: 5 mm - 25.8 mm
Outer diameter: 9.7 mm - 33.4 mm
Pressure: 95 bar - 360 bar
Composition: ·Inner tube: polyester elastomer. ·Reinforcement: one braid of steel wire. ·Cover: black polyurethane. Working temperature: From -40º C to +100º C limited to +70º C for air and water based fluids.
Inner diameter: 0.3 mm - 700 mm
Outer diameter: 0.6 mm - 950 mm
PTFE Hose/Pipe Dechengwang PTFE tubes are in extruded and molded type, and are available in virgin PTFE, modified PTFE and PTFE Compounds with the widest range of metric size. Up to diameter 260 mm we can supply standard ...
Inner diameter: 6 mm - 51 mm
Outer diameter: 13.4 mm - 67.3 mm
Pressure: 580 psi - 3,270 psi
The application of the hydraulic hose: hydraulic hose The high pressure hose is mainly used for Mine hydraulic support ,oilfield exploitation ,object ...
Inner diameter: 1 mm - 40 mm
Outer diameter: 2 mm - 44.45 mm
Temperature: -200 °C - 260 °C
... working temperature than FEP Longer continuous lengths than PTFE (due to melt processability) Better performance in high pressure/temperature application than PTFE Technical information Need more ...
Polyfluor Plastics bv
Please specify:
Help us improve:
remaining