Pressure: 6 bar - 10 bar
Temperature: 121, 135, 130, 150 °C
The valve body of the RIEGER aseptic valves is hermetically sealed from the environment, thus ensuring the perfect protection for your liquid product. The pocket-free design of the valve ...
Gebr. Rieger GmbH + Co. KG
Pressure: 6 bar - 10 bar
Temperature: 150, 130 °C
RIEGER hygienic single seat valves are used, when a maximum level of productivity, safety and quality is requested. They are found in plants of the dairy industry and the food industry. The advanced valve ...
Gebr. Rieger GmbH + Co. KG
Pressure: 6 bar - 10 bar
Temperature: 130, 150 °C
... of its one-piece valve body and the radial sealing of both valve seats along with the balanced valve disks enable a perfectly safe CIP/ IP cleaning, thus ensuring extremely high security ...
Gebr. Rieger GmbH + Co. KG
Pressure: 175, 300 psi
Temperature: 180 °F
... main valve cover pressure to open deluge valve. once open the pilot valve must be "manually reset" in order to close the valve. The model 414-01 consists of a 100G/2100G ...
DN: 300 mm
Pressure: 40 bar - 160 bar
... mechanical power into electrical power. For this purpose, the KLINGER Schöneberg ball valve with welding ends type INTEC K211-S-HT DN40 PN160 is used. The ball valve has been specially designed for the ...
KLINGER-SCHÖNEBERG GmbH
DN: 15 mm - 50 mm
Pressure: 40, 16 bar
Temperature: -10 °C - 400 °C
KLINGER KVN DN15-50 Piston valves, flange design. Features DN 15 - DN 50 piston valve valve rings KX-GT piston made of special niro-steel FTF dimensions acc. to EN 558, GR.1 flanges ...
KLINGER-SCHÖNEBERG GmbH
DN: 65 mm - 150 mm
Pressure: 16 bar
Temperature: -10 °C - 300 °C
KLINGER KVN DN65-150 Piston valves, flange design. Features DN 65 - DN 150 piston valve valve rings KX-GT piston made of special niro-steel FTF dimensions acc. to EN 558, GR.1 flanges ...
KLINGER-SCHÖNEBERG GmbH
Automatic drain valve for electro-compressor start (up to 2 HP). It avoids irreparable damages to mono-phase motors.
DN: 2 in - 24 in
... Shut Down Valve) and HIPPS (High Integrity Pipeline Protection System) systems. Fields of application: • Natural gas industry; • Energy; • Petrolchemical industry; • Water transport. Deltaflux valves ...
DN: 1 in - 2 in
Pressure: 18.9 bar
Temperature: -10 °C - 60 °C
... Dilock is a safety device that quickly interrupts the gas flow should? the controlled pressure reach the intervention set valve due to any malfunction. Special suitable for natural gas, LPG and non-corrosive gas. Main ...
DN: 1 in - 10 in
CONTROL GAS VALVES Reflux 919 The Reflux 919 Control is a pneumatic control valve, specifically designed for use with normal gas, commonly operated by a direct-acting type diaphragm ...
DN: 15 mm - 20 mm
Pressure: 0 bar - 16 bar
Temperature: -10 °C - 120 °C
In media-separated piston valves, a pivoted lever in conjunction with the membrane fitted on it ensures low-friction power transmission with high tightness. Due to the “lever arm effect”, only a small dimensioned pneumohydraulic ...
DN: 15 mm - 100 mm
Pressure: 16 bar - 40 bar
Temperature: -10 °C - 200 °C
Flanged EN or ASA 2 ways linear control valve available in different materials and pressure ranges with electric, electro pneumatic or pneumatic action.
The VGP slide valves are valves designed for heavy and particularly stressful applications. They are normally installed under hoppers, silos and tanks. Driven by pneumatic actuators, ...
DN: 15 mm - 50 mm
Pressure: 25 bar
Temperature: -15 °C - 200 °C
Special features • - Consisting of single-seated globe valve and actuator • - Flanges or male thread connection and welding or threaded ends or female thread connection Accessories • - Type 2 NI Strainer Options ...
SAMSON
DN: 6 mm - 16 mm
Ventilation elements Air valve, pneumatically activated Air Valve
DN: 0.75, 1 in
Pressure: 276 bar
Temperature: -54 °C - 177 °C
... positive seal • - Handle indicates flow direction • - Color coded handles • - Low operating torques • - Optional pneumatic actuation • - 100% factory tested
Watts Fluid Air
Pressure: 4 bar - 6 bar
Jet Edge’s patented Dual Pressure Valve is a remotely mounted valve that allows waterjet operators to control water pressure independently of the intensifier pump. This enables operators to run a number ...
DN: 0.125 in - 0.5 in
Pressure: 35 psi - 130 psi
Temperature: 0 °F - 160 °F
Soft-start valves allow pneumatic components to be pressurized slowly for safety and control. MGV series soft-start valves are available with port sizes from 1/8" NPT to 1/2" NPT and ...
Bimba
Temperature: 5 °C - 150 °C
Series XLA-2 are high vacuum angle valves for use in industrial applications employing high vacuum and process gases. Common industries that may use these angle valves include semiconductor, solar and ...
SMC Corporation of America
DN: 32, 40, 50 mm
Pressure: 16 bar
Temperature: -10 °C - 180 °C
... durability in steam and aggressive applications • Valves meeting Pressure Equipment Directive 97/23/EC • Mountable in any position • Tight shut-off and Long Service Life • Parker Angle Seat Valves ...
Parker Fluid and climate Controls Europe
Pressure: 95, 90, 85 psi
Flow rate: 7 ft³/min - 15 ft³/min
ACV Air Control Valve The Clemco air control valve (ACV) allows the blast operator to control the volume of air to the Clemco high-pressure Type CE, ...
DN: 50 mm - 1,400 mm
Pressure: 25 bar
Temperature: -250 °C - 260 °C
Triple-offset butterfly valve, metal-seated (fire-safe), without gland packing, maintenance-free, with lever or manual gearbox, pneumatic, electric or hydraulic actuator. Body made of steel or stainless ...
KSB
DN: 0.5 in - 3.15 in
Pressure: 700 bar
Temperature: -40 °C - 150 °C
Parker's Isolation Ball Valves are designed for use on Air Conditioning and Refrigeration units. They ensure positive shut off refrigerant flow in either flow direction, even during system evacuation. The Sporlan Ball ...
DN: 0.125 in - 0.75 in
Pressure: 414, 1,035, 690 bar
Temperature: -40 °C - 121 °C
... ®, CTFE Valve Stem 17-4 Stainless Steel Remaining Parts -316 Stainless Steel, Brass Flow CapacityVA Series -Valve: Cv = 0.75 -VG Series Valve: CV = 2.0 Weight (approximate) -VA ...
DN: 19, 30 mm
Pressure: 30 mbar - 5,500 mbar
Temperature: -20, -30, 66 °C
The Type VS100 slam shut is constructed in such a way that it shuts off the gas flow to the downstream system when the outlet pressure goes above or declines below the predefined levels. Type VS100 slam shut has a ductile iron and ...
FISHER REGULATORS
DN: 15 mm - 100 mm
Pressure: 16, 3 bar
Temperature: 220 °C
High precision control valves, with pressure reducing valve as their base (Built-in separator & trap). The MC-COS multi control valve consists of the COS pressure reducing valve ...
TLV Euro Engineering
DN: 15 mm - 200 mm
Pressure: 16 bar
Temperature: -60 °C - 200 °C
Features •Best control characteristics of a ball valve due to specially designed interior contour •Maximum reliability: one piece ball/stem unit avoids weak spot ball to stem •Universally applicable: many options ...
DN: 40 mm - 300 mm
Pressure: 5 psi - 300 psi
Temperature: 90 °C
... firewater systems that include electric or redundant (electric and pneumatic) fire detection. It opens, preserving system designed flow, in response to an electric signal and/or a pneumatic pressure ...
BERMAD CS Ltd
DN: 50 mm - 300 mm
Pressure: 1 MPa
Temperature: 200 °C
RDV rotary disc gate valve The valve plate is driven by the rotating shaft, so that the motion of the valve switch is rotating. The piston rod of the pneumatic actuator ...
Zhejiang Gute Pneumatic Machinery Co., Ltd
DN: 51, 25 mm
... Pneumatically open and closes valve for for fuel gas Operation is automatic or semi-automatic Pneumatic control pressure can be air, gas or oil Models for 2 in. or 1 in. (51 mm or 25 mm) ...
Frank W Murphy Ltd.
Please specify:
Help us improve:
remaining