GEMU pneumatic valves

DN: 0.5 in - 2 in
Pressure: 41.4 bar
Temperature: 400 °F

... The NIBCO® bronze ball valve provides bubble-tight shutoff at 600 PSI. The valve is equipped with integral ISO direct mount pad for actuation and vented ball. It is pre-assembled with NIBCO® Series 2000 ...

DN: 50 mm - 600 mm
Pressure: 16, 10 bar
Temperature: 100 °C

Resilient-seated, lug-type butterfly valve for flange mounting to pipelines; disk with centric bearing; suitable for use in sea water applications. With replaceable liner mounted on a vulcanised seal carrier ring, and ...

DN: 15, 20, 25 mm
Pressure: 25, 16 bar
Temperature: -20 °C - 200 °C

... combination with pneumatic actuators AVP242, AVP243 and AVP244 Water quality as per VDI 2035 Valve with flange connection as per EN 1092-2, seal form B Nominal pressure 25 bar, except BUG065F316, nominal ...

DN: 15 mm - 100 mm
Pressure: 63, 50 bar
Temperature: -20 °C - 160 °C

Shut-off valve is made of three stainless steel parts with floating precision ball. The valve is operated pneumatically (double- and single-acting) and is characterized by a long service life and high ...

DN: 15 mm - 65 mm
Pressure: 2 bar - 16 bar
Temperature: -10 °C - 180 °C

... vacuum up to 10-2 mbar or liquids up to viscosity of max. 600 CST (mm2/s) Control: 1. pneumatic - lubricated and unlubricated and 50 µm filtered compressed air - port G1/8 2. ...

DN: 50 mm - 1,500 mm
Pressure: 400 bar
Temperature: -196 °C - 450 °C

Trunnion mounted split body ball valves, double block and bleed function, for oil and gas standard and severe applications The FCT Split Body trunnion mounted ball valves have been designed for severe ...

... unused valve leg, and is located between two halves of the metal diverting gate. These valves are available in sizes 2", 3", 4", 5" and 6". They can contain manual, motorized, or air-cylinder actuators. ...

Pressure: 125 psi

Change direction of air-conveyed material The Three-Way Sliding Hose Switch by Dynamic Air Inc. is a smooth, full ported, air operated switch for use in almost any pneumatic ...

DN: 50, 25, 40, 16 mm
Pressure: 5 bar - 7 bar
Temperature: 200, 50, 250, 80 °C

The compact mini UHV gate valve featuring a modular actuator concept is well suited for industrial and R&D applications. It is often used in pipings of semiconductor process systems.

... of isolation valve. The manufacturer is a great provider of bellows, manually, pneumatic or electro pneumatic valves. These valves are placed in a heated ...

DN: 16 mm - 110 mm
Pressure: 16 bar

Cepex offers a complete range of ball valves in PVC-U and PVC-C (both manual and automatic), featuring the “Antiblock” system which prevents ball jamming. Valves are 100% hydro tested prior to leaving ...

DN: 50 mm - 200 mm
Pressure: 10 bar - 40 bar

... Coating: Epoxy, Enamel Automatic air admission and air release of water pipelines in plants, buildings and valve chambers. For potable water. Automatic air admission ...

DN: 15 mm - 50 mm
Pressure: 10 bar - 25 bar
Temperature: -271 °C - -30 °C

... Easy replacement of the compatible valve inserts - Prepared for installation into vacuum-jacketed lines - Cryogenic valve and filter series (globe or control valve, filter) in standard ...

DN: 0.5 in - 2.5 in
Temperature: 105 °C

... The Roda Deaco RDS1 Swing Gate Valve is a compact air intake shutoff valve that provides emergency overspeed shutdown of a diesel engine. The RDS1 Swing Gate Valve can ...

The actuator pilots of the OS Series are especially designed for pressure control in regulators and shutoff valves, they can operate on maximum and minimum pressure, on maximum only, on minimum only.

DN: 60 mm - 400 mm

Throttle/Shut off Valves with Pneumatic Rotary Actuator 5/2-way solenoid valve (1-coil) 2 mechanical limit switches and solenoid valve wired in a limit switch ...

DN: 0.5 in - 2 in
Temperature: -10 °C - 180 °C

Media: water, oil, air, aggressive media and steam(1) Media temperature: -10°C … +180°C Ambient temperature: -10°C … +60°C Pilot media: air, inert gases, water Body material: bronze (CC491K EN 1982 : 2000) Bonnet material: brass (CW617N ...

DN: 70, 145 mm
Pressure: 400 bar - 2,800 bar
Flow rate: 0 l/min - 650 l/min

Pneumatically Switching Valve PSV The reliable switching valve for a wide range of requirements. Available open or closed without actuating energy. Special features: Switchable under operating pressure, ...

DN: 25 mm - 700 mm
Pressure: 10 bar - 100 bar

... control The valve segment comes with dual bearings which results in high durability and low torque requirement The valve seat can be replaced from the outside without the need to disassemble the valve, ...

DN: 25 mm - 400 mm
Pressure: 3 mbar - 200 mbar
Temperature: 0 °C - 140 °C

Safety: Guided valve disc allows reproducible closing and sealing after activation. Time savings: The pneumatic venting allows easy integration of the valve in a fully-automated ...

DN: 20 mm - 150 mm
Pressure: 3.5 bar - 6 bar
Temperature: 135 °C - 180 °C

... air, water, gas, steam in textile, power generator, paper & pulp, chemical, petrochemical industries, PSA nitrogen system, air dryers, gas generators & others. Upto 50 mm 300 cy/hr.,(tested on air,on other fluids this ...

DN: 0.125, 0.25, 0.375, 0.5, 0.75 in
Pressure: 0 bar - 10 bar
Temperature: 0 °C - 60 °C

Quick exhaust valve enabling high purge speeds to be reached (valve technology) directly on the wiring circuit or cylinder supply port.

... line and switch same to several; different lines.the Vent-IGEL also is inexpensive compared to other valve clusters on the basis of 4/2 way seat valves. A retrofit with additional modules in case of ...

DN: 50 mm
Pressure: 10 bar
Temperature: -20 °C

Standard sampling valve with a double acting pneumatic actuator. Proximity switch detects the open / closed position of the valve.

DN: 0.5, 0.75 in
Pressure: 10 bar
Temperature: 75 °C

... vertical flame tests. For these reasons, Halar is considered one of the most durable and versatile thermoplastics used in valves and piping systems. Applications ranging from the harshest of chemicals to the purest ...