GRACO electric pumps

Flow: 0 m³/s - 40 m³/s
Pressure: 0 bar - 40 bar
Fluid temperature: 0 °C - 120 °C

Vertical immersion pumps are multistage centrifugal pumps for installation on the mounting flange of tanks. PUMPED LIQUIDS Light, non-explosive, clean or contaminated liquids. Water Cutting fluid Lubricants

Flow: 0 m³/h - 110 m³/h
Pressure: 0 bar - 40 bar
Fluid temperature: 0 °C - 120 °C

Vertical in-line pumps Vertical and multistage centrifugal pumps. The in-line design enables the pump to be installed on pipes where the suction and discharge ports are on the same horizontal ...

Flow: 0 l/min - 650 l/min
Pressure: 0 bar - 100 bar
Fluid temperature: 0 °C - 60 °C

High pressure pumps High pressure spindle pumps. Solution for deep boreholes and the high pressure clearance of chippings. PUMPED LIQUIDS Light, non-explosive, clean liquids with at least 5% of ...

Flow: 100, 120 l/min
Pressure: 8 bar
Power: 0.35 kW

The OIL-LESS pump units range completely manufactured in Italy by NARDI COMPRESSORI stand out for their high quality, the prime materials and components installed ensure their long life and top performance. With their ...

Flow: 115, 145 l/min
Pressure: 15 bar
Power: 1.1 kW

... and forced air cooling systems, they can work long hours with little maintenance. This EXTREME 15 BAR pumping unit version comes with a 1,5Hp motor in single-phase and it can reach a maximum working ...

Flow: 36, 43, 29, 35 m³/h
Pressure: 10 bar
Power: 1.9, 2.2 kW

The OIL-LESS pump units range completely manufactured in Italy by NARDI COMPRESSORI stand out for their high quality, the prime materials and components installed ensure their long life and top performance. With their ...

Flow: 5.5 l/h - 1,000 l/h
Pressure: 10, 40 bar
Power: 0.18, 0.25, 0.37, 0.55, 0.75 kW

... Manually with graduated knob Motor speed regulation via inverter Electric servomotor adjusts pump flow rate remotely Aluminium housing: for excellent operating performance even in ...

Flow: 0.21 m³/h - 67.69 m³/h
Pressure: 39 bar - 1,146 bar
Power: 2.2 kW - 110 kW

3C Triplex Pumps Series Process pumps for high-pressure duties A flexible, robust and reliable solution to pumping high temperature, abrasive and viscous liquids in a multitude of industrial applications, ...

Flow: 40 us gal/min
Pressure: 10 psi

WSP33 (WSP33K1AA ) FEATURES 1/3hp 115V submersible pump Top discharge 40 gal./min capacity Lightweight durable stainless steel casing Automatic non-mercury float switch Rated for continuous use

Flow: 110 us gal/min
Pressure: 14 psi
Power: 0.5 ch

WSP50 (WSP50AA ) FEATURES 1/2hp 115V submersible trash pump Side discharge 110 gal./min capacity Solids handling capability up to 2" Automatic non-mercury float switch Rated for continuous use

Flow: 70 us gal/min
Pressure: 0 psi - 15 psi

WSP73 3/4 hp 115V submersible pump Top discharge 74 gal./min. capacity Automatic non-mercury float switch Double mechanical seal construction Rated for continuous use 50 ft cord

Pressure: 63 bar
Power: 0.18, 0.12 kW
Fluid temperature: -10 °C - 60 °C

The pump is designed for the lubrication with plastic grease or oil of machines and equipment requiring continuous lubrication in small quantities. The lubricant is fed to each receiving point via ...

Flow: 0.15, 0.25 l/min
Pressure: 400, 200 bar
Power: 0.75 kW

... conditions. The pump consists of the following subassemblies: Central lubrication a tank with a grease feeding device, a drive train consisting of an electric motor, a ...

Flow: 0.4, 0.2, 0.1 l/min
Pressure: 200, 320, 400 bar
Power: 1.1 kW

... equipment and work conditions. The central lubrication pump consists of the following basic assemblies: a grease tank with a feeding device, a drive unit consisting of an electric ...

Flow: 10 m³/h - 1,400 m³/h
Weight: 142 kg - 1,956 kg

The Linatex pump, type III R, belongs to the latest generation of successful wear-resistant and corrosion resistant slurry pumps and has an improved efficiency. It has in practice proven durable Linatex ...

Flow: 0 m³/h - 1,850 m³/h
Head: 0 m - 120 m

... operating in optimal condition. The pump utilizes a flexible coupling, which allows the internal pump component to be removed without dismantling of the motor from the pump ...

Pressure: 51.7, 34.3 MPa
Power: 596, 373, 969, 745, 1,193 kW
Length: 3,639 mm - 5,475 mm

Mud pump is used to circulate drilling fluid while drilling, it is the core part of drilling fluid circulation system, and it is composed of power end and fluid end. The products conform to API Spec ...

Flow: 50 l/min
Pressure: 360 mbar

• Extreme compactness and solidity • High efficiency (up to class A ++) • Integrated heating element • Pressure: 360 mBar – Flow rate: 50 L / min Applications • Domestic and professional dishwashers

Power: 20 W - 400 W

... Asynchronous and brushless motors for rotary vane pumps (flow rates 50-350 l/h) • Low vibrations and noise • Compatible with magnetic drive pumps or mechanical drive ...

Flow: 55, 71, 87 l/min
Head: 23, 16, 10, 7 m
Power: 450, 250 W

... /off switch integrated low voltage release is intended to prevent an uncontrolled start of the drum pump motor after a power failure or voltage drop and thus guarantees ...

Flow: 82, 61 l/min
Head: 9, 20 m
Power: 460 W

... drum pump motor is characterized not only by its light weight (2,9 kg) but also by its elegant design and ease of use. The non-stationary and stationary usable drive is particularly suitable ...

Flow: 55, 66 l/min
Head: 7.5, 15 m
Power: 400 W

... drum pump motor is characterized not only by its light weight (2,9 kg) but also by its elegant design and ease of use. The non-stationary and stationary usable drive is particularly suitable ...

Flow: 1.2 l/h - 35 l/h
Pressure: 0 bar - 10 bar
Power: 33, 20 W

... deformable drive diaphragm. This membrane is connected via a connecting rod fixed to the drive magnet and so is deflected to the suction and pressure strokes. Solenoid diaphragm pumps ...

Flow: 3 l/min - 24 l/min
Pressure: 30 bar
Power: 4 kW

... m-tec m-tec pump is the perfect entry-level model for the automation and automation and 3D printing sector. Advantages Easy adaptation to different materials due to infinitely variable power control Problem-free ...

Flow: 66 l/min
Pressure: 1.5 bar - 2.8 bar
Head: 34, 45, 53 m

Self-priming centrifugal multi-stage pump For pumping rainwater out of storage tanks Rubber feet to suppress pump vibration and noises Integrated stainless-steel dirt trap Suction end with 1“ nozzle Optionally ...

Flow: 0 m³/h - 120 m³/h
Pressure: 0 bar - 35 bar

The FKL series features circumferential piston pumps designed for special pumping applications. These pumps operate at 35 bar maximum pressure with up to 120 m3/h flow rates. Available in ten different ...

Flow: 20 m³/h - 180 m³/h
Pressure: 20, 25 bar

When developing this exceptional pump, we intended to set new standards in double-screw technology. We started by rethinking functional principles from the ground up and eliminated previously known deficiencies typically ...

Based on the proven centrifugal pumps of the Fristam FP range, the shear pump has a new, efficient mixing method. A rotor/stator system which operates at tip speeds of up to 38 m/s is utilized instead ...

... centrifugal pumps are designed for agricultural and industrial spraying and transfer of a variety of fluids: water, insecticides, herbicides, wettable powders, emulsives, liquid fertilizers, etc. Series 9300 hydraulic ...

... self-priming centrifugal pumps handle big, high-capacity spraying jobs and tank filling with ease. They offer outstanding performance without the need for a flooded suction inlet. The pumps are ideal ...

Hypro centrifugal pumps are designed for agricultural and industrial spraying and transfer of a variety of fluids: water, insecticides, herbicides, wettable powders, emulsives, liquid fertilizers, etc. Hypro Series ...

• Flow rates and prevalence on request • Made of PP or PVDF

• For applications inside or outside the tank • Made of plastic: PP – PVC • Shaft made of: AISI316 – coated titanium

• Magnetic drive pump made of plastic material • Closed or open impeller pump in AISI304 or AISI316 • Connectors in PP, PVC, PVDF • Pumps with membrane in plastic material or steel

Flow: 42 l/min - 129 l/min
Pressure: 500, 400, 320 bar
Power: 0 kW - 75 kW

HFA/HFC fluids Non-oily water/clear water Mine water Industrial water Descaling water Neutral fluids with a viscosity of 0.5 – 4.0 mm²/s

Flow: 201, 167, 266, 221, 278 l/min
Pressure: 160, 210 bar
Power: 0 kW - 75 kW

HFA/HFC fluids Non-oily water/clear water Mine water Industrial water Descaling water Neutral fluids with a viscosity of 0.5 – 4.0 mm²/s

Flow: 103 l/min - 163 l/min
Pressure: 365, 575, 465 bar
Power: 0 kW - 110 kW

HFA/HFC fluids Non-oily water/clear water Mine water Industrial water Descaling water Neutral fluids with a viscosity of 0.5 – 4.0 mm²/s

Flow: 0 m³/h - 560 m³/h
Pressure: 0 bar - 12 bar

Thanks to the vertical construction form, the WANGEN KL-T / KB-T has only a small space requirement. The consistent diameter of the joint connections ensures constant flow speeds and reduces the sensitivity to foreign ...

Flow: 0 m³/h - 100 m³/h
Pressure: 0 bar - 80 bar

... pharmaceutical and cosmetics industry. Low-impact delivery of products containing solids. CIP and SIP cleaning is possible, the pump is available as a mobile or stationary unit. Benefits and Characteristics ...

Flow: 0.02 m³/h - 7 m³/h
Pressure: 20 bar
Fluid temperature: -30 °C - 140 °C

... in the product chamber. Pump disassembly is easily carried out by removing all pump component connections outside the product chamber. Benefits and Characteristics excellent dosing accuracy low dead ...

Flow: 10 m³/h - 30 m³/h
Pressure: 12 bar
Power: 5.5 kW - 11 kW

The “Dragon ME” series represents the evolution of the Dragon piston pumps series with the addition of the membrane unit in case of pumping highly abrasive liquids. Flow ranges: from 20 to 30 mc / h - in single mode ...

Flow: 1 m³/h - 10 m³/h
Pressure: 12 bar
Power: 1.5 kW - 5.5 kW

Piston Pump - "Libra" Series from 1 to 10 mc/h Pressure up to 15 bar Many materials configuration For pressure transfer of viscous liquid For sludge feeding of Filterpress For chemical Industry, metal finishing ...

Flow: 249.88 m³/h - 931.21 m³/h
Pressure: 175 psi

Clear Liquid Pumps Cornell’s clear liquid pumps are known around the world as the most durable, most reliable, highest efficiency pumps in the industry. They can be found in a variety ...

Flow: 4.54 m³/h - 36.3 m³/h
Head: 80'00", 130'00"

Edge End Gun Booster Pumps 2C-Corrections-ClippedCornell’s EDGE™ End Gun Booster pump for Center Irrigation Pivots are designed as a retrofit for pivot systems. The competitively-priced 3HP and 5HP End ...

Flow: 68.1 m³/h - 823.3 m³/h
Pressure: 175 psi

Cyclone Vertical Turbine Pumps Cornell Pump’s VT pump series (Cyclone) relies on our demonstrated superior hydraulics, in a submerged design. The proven quality of Cornell RB series ...

Flow: 0 l/h - 0.06 l/h

... mL syringe) Pumps continuously until you stop the pump Infusion rate can be changed while pumping Syringe purge mode Power failure mode allows pump to ...

Flow: 0 l/h - 0.0021 l/h

... Download Brochure Download User Manual Special Application: Continuous Infusion (Push-Pull) and Dual Syringe Pump Using 2 NE-1000 pumps attached with a cable, one pump ...

Flow: 0 l/h - 7.515 l/h

... User Manual Available in Microfluidics (NE-4002X) and OEM (NE-4500) versions Special Application: Continuous Infusion (Push-Pull) and Dual Syringe Pump Using 2 NE-4000 pumps attached ...