Process temperature: -20 °C - 450 °C
Process pressure: 1.6 MPa - 4 MPa
Precision: 1, 1.5, 2.5 %
... physical properties and composition of the measured medium. The meter coefficients are only related to the shape and size of the vortex generator. Generally, there is no need to re-calibrate the meter ...
Volumetric flow rate: 2.5 l/min - 100 l/min
Process temperature: 0 °C - 90 °C
Process pressure: 1,000,000, 750,000, 650,000 Pa
... object is put in a flow of liquid, an oscillating vortex street, called Karman vortex street, takes place in the downstream of the object. It was named after the fluid dynamicist who discovered this phenomenon. Our Karman ...
Volumetric flow rate: 0 m³/h - 59.1 m³/h
Process pressure: 0 bar - 172.37 bar
... measurement of various types of liquid flow such as hydrocarbonated flow and generated water flow. The system is extremely versatile and adaptable to a vast array of flow ...
Volumetric flow rate: 0 m³/h - 600 m³/h
Process temperature: -20 °C - 60 °C
Process pressure: 0 bar - 40 bar
MTCMF Mass Flow Meter Overview Coriolis mass flow meter (MTCMF) is a new type flow meter which is designed according to Micro Motion ...
Volumetric flow rate: 10 l/min - 150 l/min
Process pressure: 0 bar - 3.5 bar
FMS-P is a digital flow meter designed to control the transfer system, allowing the fuel to be supplied only to authorised users. The authorisation is given by the owner of the system ...
Volumetric flow rate: 10 l/min - 100 l/min
Process temperature: -10 °C - 50 °C
Process pressure: 21 bar
... Series Diesel Flow Meter is a lightweight, accurate, and reliable turbine meter with rugged aluminum housing, sealed electronic circuitry and digital ...
Volumetric flow rate: 0.5 l/min - 1,200 l/min
Process temperature: -40 °C - 350 °C
Process pressure: 0 bar - 150 bar
... versions of the Metri Paddlewheel flow meter will withstands pressures up to 100 bar as standard with higher pressure options also available. Metri LPM paddlewheel Flow Meters ...
Metri Measurements
Volumetric flow rate: 5 m³/s - 60 m³/s
Process temperature: -25 °C - 60 °C
Process pressure: 25, 16, 40 bar
... GVF100 digital gas vortex flow meter is a flow meter operating with Karman Vortex Street principle for flow rate of gases (air, oxygen, ...
Xi'an Gavin Electronic Technology Co. Ltd.
Process temperature: -50 °C - 150 °C
Process pressure: 0 bar - 40 bar
... velocity in the pipe line, therefore the flow measurement is volumetric. The FLEMCO flow meters are backed by international standards covering flow calculation, manufacturing ...
EMCO Controls A/S
Volumetric flow rate: 0.1 m³/h - 3,000 m³/h
... Two-wire 4~20mADC signal output, 0.8” or 0.56” LCD digital display. 6.Easy-to-read displays on all flow meter types Horizontal LCD Display Metal Tube Rotameter is mainly suitable ...
Q&T Instruments
Process temperature: -40 °C - 350 °C
Process pressure: 0 bar - 63 bar
Precision: 1, 0.75 %
... high-temperature situations, but the vortex flow meter has a wide range and a minimal pressure drop, making it a popular choice among flow professionals. Vortex Flow ...
Volumetric flow rate: 0.2 m³/h - 350 m³/h
Flow meter for Clear Liquids: Process Control Devices manufacture various digital flow meter used in industry as per fluid property. Turbine flow ...
Flowmeter for partially filled pipes and open channels Used for all applications in which there is no loss primary element (Parshal, etc.). It offers an alternative to costly civil works required to install a channel ...
Toscano Linea Electronica
The electronic microprocessor mod. F 130 are easily matched to the flow meter series KDN and allow the aggregation of totalisation and predetermination of all fluids up to 40,000 cps. ...
Process temperature: -40 °C - 350 °C
Process pressure: 16 bar
Introduction The DV 100 vortex flow meters are based on Karman effects. Features - Large measurement range - High accuracy - Low pressure loss - Suitable for gas, steam and fluid Technical ...
Volumetric flow rate: 0.2 m³/s - 20 m³/s
Process temperature: -25 °C - 70 °C
Process pressure: 20 bar
Product of Taiwan, Non invasive design, no down time for installation, no pipe cutting, maintenance at any time, significantly reduce installation and maintenance costs. Tube installation-zero tube damage, no blockage, no leakage and ...
Volumetric flow rate: 20 l/min - 120 l/min
Process pressure: 0 bar - 10 bar
numak srl logo Turbine flow meter which ranges from 10 ÷ 120 l/min is a meter for presenting less viscosity liquids with a turbine measuring system. They can be smoothly setup, in line ...
Repeatibility: 0.15 %
... practical needs of engineers for measuring flow-rates and total flow at multiple points on water networks. Water network management Minimum flow measurement Flow ...
Process temperature: -30 °C - 160 °C
... install, strong anti-interference ability,stable and reliable, low starting flow, no pressure loss; • - Isolated RS485 interface, between the flowmeter and the secondary meter can be ...
Process temperature: 0 °C - 50 °C
Process pressure: -0.8 bar - 8 bar
Precision: 5 %
... instantaneous flow rate, the accumulated flow rate or the pressure, therefore they can perform the function of flowmeter, flow switch, pressure gauge or pressure switch. They feature ...
Process temperature: 0 °C - 60 °C
Process pressure: 0 bar - 16 bar
... managed to increase system efficiency and reduce costs. Airscout Flow Meters remove any guesswork by collecting accurate measurements throughout a facility. BENEFITS OF AIRSCOUT FLOW ...
Process temperature: -30 °C - 160 °C
... from each other. To carry out flow measurements with the ultrasonic flow meter, the flow velocity, the volume flow and the volume are displayed after ...
Process temperature: -30 °C - 160 °C
The ultrasonic flow meter has a measuring range of ±32 m/s. To perform flow measurement with the ultrasonic flow meter, the flow velocity, ...
Process temperature: -40 °C - 60 °C
... cut them open. This enables the flow meter to be installed even during operation. Another special feature of the flow meter are the different outputs. It is possible ...
Process pressure: 70 bar
Pulser and solenoid single valve (PSV) for oil with G 1/2" (f) connection. FLUIDSFRESH OIL SECTORSAERONAUTIC | AUTOMOTIVE | MANUFACTURING INDUSTRY CERTIFICATIONSNOT TYPE-APPROVED FOR PUBLIC USE
Volumetric flow rate: 1.3 m³/h - 3,200 m³/h
Process temperature: -10 °C - 40 °C
Process pressure: 0 Pa - 200,000 Pa
Description BF-3000 Ultrasonic Biogas Flowmeter can be commonly used with various industrial gas streams(biogas, natural gas, air, etc.), but with special design to enable it withstand the wet and corrosive gas conditions ...
Volumetric flow rate: 0.1 m³/h - 4 m³/h
Process temperature: -10 °C - 40 °C
Process pressure: 0 Pa - 20,000 Pa
... detect probe, measure flow velocity, temperature and composition directly. • “One card to one flow meter ” and reliable encryption system ensures user’s interests. • Automatic detection ...
Volumetric flow rate: 0.4 m³/h - 1,600 m³/h
Process temperature: -20 °C - 65 °C
Process pressure: 0 Pa - 200,000 Pa
... industrial use/ for natural gas or general use Gasboard-7200 gas flowmeter used the latest ultrasonic transit-time differential method to measure natural gas flow and other kind of gases flow. ...
Volumetric flow rate: 18.9 l/min - 190 l/min
Process pressure: 10 bar
Precision: 0.5 %
For Adblue Digital Flow Meter Inlet And Outlet: bsp 1” Body Material: pps NOTE: To be used in ADBLUE tank Ref: 3296— ADBLUE® TRANSPORT TANK 100L 12V
KROFtools Professional Tools
Volumetric flow rate: 10 l/min - 100 l/min
Process pressure: 20 bar
1” Electronic meter suitable with diesel or Biodiesel up b30 dispay & totaliser shows up to 9999 Litres Characteristics: 1” Bspf ports
KROFtools Professional Tools
Volumetric flow rate: 18.9 l/min - 190 l/min
Process pressure: 10 bar
Precision: 0.5 %
For diesel digital flow meter inlet and outlet: npt 3/4” bsp 3/4” Body material: pps
KROFtools Professional Tools
Please specify:
Help us improve:
remaining