Grundfos vertical-mount pumps

Flow: 48, 40 m³/h
Pressure: 16 bar
Head: 135 m

Two-stage vertical centrifugal pump The pump is a two-stage vertical centrifugal pump equipped with stainless steel shaft, mechanical shaft seal, ...

Flow: 2,000, 2,400 m³/h
Pressure: 25 bar
Head: 195 m

... Applications Within the marine industry the pumps are suitable as: • Fresh and seawater cooling pumps • Bilge and ballast pumps • Fire-fighting • General service pumps • ...

Flow: 0 m³/h - 7,400 m³/h
Pressure: 25 bar
Head: 140 m

The in-line DSL double suction centrifugal pump Up to 5400 m³/h (23800 US gpm) The DSL pumps are single-stage, double-suction, vertical, centrifugal pumps. The design ...

Flow: 4.5 m³/h
Power: 250 W
Fluid temperature: 80, 110 °C

The J15 allows entry into the low flow vertical filter range. Available in polypropylene and PVDF, filtration is on a 10" QUALITHERM™ heat-welded cartridge. This economical filtration media can filter from 0.2 to 100 ...

Flow: 25 m³/h
Fluid temperature: 110, 80 °C
Width: 473 mm

This medium flow vertical filter offers a maximum flow rate of 25 m³/h. It can be mounted underwater or above ground to save space in the tank. Features and benefits Excellent chemical resistance Like most plastic ...

Flow: 5 m³/h - 25 m³/h
Power: 1,100 W
Fluid temperature: 110, 80 °C

This medium flow vertical filter offers a maximum flow rate of 25 m³/h. It can be mounted underwater or above ground to save space in the tank. Features and benefits Excellent chemical resistance Available in polypropylene ...

Flow: 0 us gal/min - 4,500 us gal/min
Pressure: 0 psi - 1,500 psi
Fluid temperature: 14 °F - 230 °F

... changing pump arrangement to match the width of the TSF opening to the drop zone • Concentric rotation in a close tolerance pressure tube allows the TSF to generate positive stuffing pressure to the pump ...

Flow: 0 m³/h - 225 m³/h
Pressure: 0 bar - 9 bar

As an extension to the standard Epsilon range, a vertical pump is available in various materials, including stainless steel or super duplex steels. This competitively priced high pressure pump ...

Flow: 900 l/min
Head: 12, 27, 40 m
Power: 5 kW - 12.6 kW

Immersion Pumps are plain centrifugal pumps with the impeller fitted on the driving shaft extension. They are mounted on top of the container, the pump extension being immersed in the ...

Flow: 0 l/min - 870 l/min
Head: 0 m - 62 m
Power: 3.3 kW - 10.3 kW

Horizontal End-Suction Pumps are centrifugal inline pumps with a compact design where the impeller is mounted onto the extended motor shaft. These pumps are not ...

Flow: 16.2 l/min - 47.4 l/min
Pressure: 10 bar - 200 bar
Power: 0.7 kW - 12.5 kW

Screw spindle pumps with their silicon carbide spindle housing and highly wear resistant spindles are capable of achieving extremely high pressures. Brinkmann high pressure screw pumps are designed for ...

Flow: 80 l/min
Head: 36 m - 54 m
Power: 0.55, 0.75 kW

Centrifugal vertical multistage water pumps able to develop high pressure and a high water lift with a comparatively low power consumption. Universal pump for civil and industrial purposes, ...

Flow: 0 m³/h - 900 m³/h
Pressure: 0 Pa - 800,000 Pa
Head: 0 µm - 200,000,000 µm

... External, single, or double flushing ​ FRP accessories to empower or adapt the pump to any plant Flanges reinforced in Kevlar (more resistant) On request: chance to choose pump colour Applications Aquarium, ...

Flow: 0 m³/h - 275 m³/h
Pressure: 8 bar
Head: 0 m - 90 m

K2 series comprises long vertical sump pumps with external electric motor and baseplate available in 3 sizes. Process sump pumps for aggressive liquids 3 versions according to the ...

Flow: 2 m³/h - 50 m³/h
Pressure: 8 bar
Head: 0 m - 40 m

... bottom and outlet pipe at the top. These pumping solutions ensure a longer life cycle and less maintenance operations. Compact sump pumps HME version: cantilever shaft with column length: 274mm or ...

Flow: 250 us gal/min - 5,000 us gal/min
Pressure: 40 psi - 519 psi

Vertical, single and multi-stage, turbine pumps for firefighting applications. UL listed and FM approved pump for suction lift conditions. Available with diesel or electric drive. Overview Ruhrpumpen's ...

Flow: 273 m³/h
Pressure: 24 bar
Head: 119 m

The IIL type vertical in-line pumps feature a space saving, top pull-out design which allows versatile applications in a wide range of industries. These pumps can meet the requirements ...

Flow: 2,271 m³/h
Pressure: 19 bar
Head: 122 m

... supply systems Overview Ruhrpumpen's IVP vertical in-line pump design comes in 28 hydraulic sizes. It allows direct connection to the pipelines, which reduces installation costs with a compact ...

Flow: 0 us gal/min - 5 us gal/min
Length: 191 mm
Width: 139 mm

... internally and externally Horizontal Suction and Vertical Discharge center porting with Optional Horizontal Side ports An integrated muffler, making it one of the quietest and most compact pumps ...

Flow: 0 us gal/min - 100 us gal/min
Length: 584 mm
Width: 330 mm

... plastic air-operated double-diaphragm (AODD) pump offers installation flexibility with adjustable porting options (horizontal and vertical). With excellent chemical resistance, the 1 1/2" all plastic ...

Flow: 5.3 m³/h - 2,900 m³/h
Head: 7.5 m - 105 m

... and corrosion conditions. 　　Different product structures with horizontal double-casing pump, horizontal single-casing pump, and vertical single-casing pumps are available. ...

Flow: 11 m³/h - 400 m³/h
Head: 7.6 m - 50 m

　　TZJL pumps are vertical type, the product is fixed above the slurry pool by the mounting plate, only the pump head is dipped in the slurry liquid, bearing and supporting ...

Flow: 0.1 l/min - 2 l/min
Pressure: 100 bar
Fluid temperature: 135 °C

... 18mm on the rear cover / Ouput G1/4'' on the rear cover Drive shaft diameter : Ø 12mm with a 4mm key Mounting of the pump : Screwed flush against the following plate by 4 M6 screws

Flow: 0.54, 0.9 m³/h
Head: 0 m - 250 m
Fluid temperature: -10 °C - 60 °C

... Electric gear pumps Descriptive Technical data: Special electric oil gear pump Built-in and adjustable bypass Orifice Ø: 1"F For JEV44 and JEV45, transfer: from 50 to 2000 ...

Flow: 0 m³/h - 1,850 m³/h
Head: 0 m - 120 m

... optimal condition. The pump utilizes a flexible coupling, which allows the internal pump component to be removed without dismantling of the motor from the pump or the pump ...

Flow: 0 l/min - 80 l/min
Pressure: 1 bar - 7 bar
Head: 0 m - 70 m

VP Vertical regenerative turbine electric pumps Hydraulic Performace Brass single stage vertical electric pumps with submerged regenerative impeller, ideal for maintaining ...

Flow: 0 m³/h - 15.6 m³/h
Head: 0 m - 16 m
Power: 1.1 kW

CTV 25-11 PLASTIC CTV 25-11 is a 1" vertical pump in PP or PVDF with 1.1 kW motor, capacity of 15.6 m3/h and max head of 16 m. Performance curve The performance curves are based on water at 20°C. Other ...

Flow: 19, 34 m³/h
Head: 2 m
Power: 1.5, 2.2 kW

CTV 40-12.5 STAINLESS CTV 40-12.5 is a 1 1/2" vertical pump in stainless steel AISI 316 with 1.5-2.2 kW motor, capacity of 34 m3/h and max head of 22 m. Performance curve The performance curves are ...

Flow: 14, 13 m³/h
Head: 11.5 m
Power: 0.48 kW

... design bottom plate that enables the pump to operate and drain down to 1 mm water level. The pump is equipped with a swing valve that prevents reverse flow from discharge hose when the pump ...

Flow: 0.6 m³/h - 158.9 m³/h
Pressure: 0 bar - 16 bar
Fluid temperature: -10 °C - 140 °C

... designed lobes. The pump is authorized to carry 3-A symbol. Note: Consult the options of the pumps authorized to carry 3-A symbol. The SLR pump is a bare shaft rotary lobe pump. ...

Flow: 63 m³/h
Pressure: 7 bar
Fluid temperature: 120 °C

The SLRT pump is a positive displacement rotary lobe pump designed to discharge food and sanitary products from a truck cistern as it can be driven by a hydraulic motor. The pump is characterised ...

Flow: 1.6 m³/h
Pressure: 6 bar
Fluid temperature: 90 °C

The KVB-25 pumps are hygienic vertical progressive cavity pumps. Drum pumps are specially designed to transfer media of either high or low viscosity from tanks and barrels ...

Flow: 104 m³/h
Head: 36 m
Power: 7,500 W

• PP materials, PVDF • Connections DIN EN ISO 9906 Dry-run safe close coupled sump pump Highest operational safety because of bearing-less design partly suitable for particle loaded fluids Tailor-made mounting plates ...

Flow: 100, 120 m³/h
Head: 25, 55 m
Power: 15 kW

... even in extreme working conditions Available high-end sealing system for dry running capacity Support plates and custom connections, on request Sump pump with wetted axis and fluid lubrication Wide ...

Flow: 220 m³/h
Head: 55 m
Power: 45 kW

... Immersion pump with one step, vertical and resistant to dry running Construction size Technical execution • Material: PP, PVDF • Spiral plastic housing flanged with stainless steel or PVDF screws ...

Flow: 34, 36 l/min

Electric pump Cematic Blue 12 V or 24 V Details Electric pump Cematic Blue for chemicals -for AUS 32 (AdBlueO), antifreezing compound and windshield cleaner with flash point > 55 °C -self-priming ...

Flow: 0 us gal/min - 178,000 us gal/min
Head: 0'00" ft - 152'00"

Axial Mixed Flow Pumps Vertical, wet pit design pump for Circulating Water Service (including condenser). Specifically designed for the nuclear industry, it features a number of hydraulic ...

Flow: 0 us gal/min - 50,000 us gal/min
Head: 60 m - 210 m

Design Features of Hayward Tyler Vertical Turbine Pumps The VS range was designed specifically for the nuclear industry and offers three different impeller types. Each impeller type provides a different ...

Flow: 0 us gal/min - 160,000 us gal/min
Head: 0 m - 500 m

... thermal expansion to vertical plane Pump cover gasket designed for even temperature across its whole area Bearing bracket bolted to pump cover to provide rigid frame ...

Flow: 156 l/h - 1,458 l/h
Pressure: 4, 250 bar
Power: 0.18 kW - 0.75 kW

Spring Return Plunger Pump A Plunger metering pumps are normally used when: • The dosed liquid is non abrasive solution • A drip proof system is not essential • High pressure is required Each ...

Flow: 49 l/h - 1,400 l/h
Pressure: 3 bar - 14 bar
Power: 0.18 kW - 0.37 kW

... Diaphragm Pump D mechanical diaphragm metering pumps are normally used when: • The dosed liquid contains small amounts of suspended solids • A drip proof/air tight application is ...

Flow: 108 l/h - 1,068 l/h
Pressure: 20 bar
Power: 0.18 kW - 0.75 kW

Spring Return Hydraulic Diaphragm Pump B & BR Hydraulic diaphragm metering pumps are normally used when: • The dosed liquid contains small amounts of suspended solids • A drip proof/air ...