Guangzhou Haozhi Industrial Co., Ltd grease lubricated spindles

Rotational speed: 12,000 rpm
Torque: 13.2, 3.7 Nm

... synchronous motor
Max. current: 12.9 A
Rated voltage: 380 V
Balance grade: G0.4
Lubrication: Grease
Runout at 50 mm: ≤0.003 mm
Spindle bearings/models: 7011C/P4 - 7010C/P2
Encoder options: Chord encoder, ...

Rotational speed: 10,000 rpm
Diameter: 27 mm
Torque: 17.9 Nm

... torque (S1:100%) (Nm): 7.1

Rotational speed: 8,000 rpm
Diameter: 150 mm
Torque: 15.9 Nm

... 100%) (N·m): 15.9
Max. torque (N·m): 27.3
Lubrication: Grease
Conical taper: 1:19
Conical runout: ≤0.003 mm
Front face runout: ≤0.003 mm
Runout at 300 mm: ≤0.008 mm
Spindle bearings: 3x7012 + 2x7010
Encoder ...

Rotational speed: 5,000 rpm
Diameter: 170 mm
Torque: 52.3 Nm

... ): 52.3
Balance grade: G0.4
Lubrication: Grease
Nose form: A2-5
Taper hole: 1:20
Conical runout (mm): ≤0.003
Front end face runout (mm): ≤0.003
Runout at 300 mm (mm): ≤0.008
Spindle bearing arrangement: ...

Rotational speed: 4,500 rpm
Diameter: 200 mm
Torque: 181 Nm

... Balance grade: G0.4
Lubricating mode: Grease
Nose form: A2-6
Taper hole taper: 1:20
Conical runout (mm): ≤ 0.003
Front end face runout (mm): ≤ 0.003
Runout at 300mm of standard rod: ≤ 0.008
Spindle ...

Rotational speed: 3,000 rpm
Diameter: 280 mm
Torque: 286 Nm

... Overview
The DGZYC-28003 is the largest, highest-torque spindle in its series. A 280 mm spindle body, A2-8 nose and an 86 mm through-hole are combined with 30 kW continuous power and 715 Nm peak torque to support ...

Rotational speed: 6,000 rpm
Diameter: 170 mm

... >Balance grade: G0.4
Lubrication: Grease
Nose form: A2-5
Taper hole taper: 1:19.18
Conical runout (mm): ≤0.003
Front end face runout (mm): ≤0.003
Runout at 300 mm of standard rod: ≤0.01
Spindle bearings ...

Rotational speed: 6,000 rpm
Diameter: 170 mm

... 6000
Balance grade: G0.4
Lubrication: Grease
Nose form: A2-5
Taper ratio: 1:19.18
Conical runout (mm): ≤0.003
Front end face runout (mm): ≤0.003
Runout at 300 mm (mm): ≤0.01
Spindle bearings: ...

Rotational speed: 4,500 rpm
Diameter: 200 mm

... machines with a conventional V-belt drive, the DGZC-20045C is a Φ200-class mechanical lathe spindle featuring a φ66 through-hole and an A2-6 nose within a 541.8 mm spindle length. It delivers up to 4,500 rpm while meeting ...

Rotational speed: 4,500 rpm
Diameter: 200 mm

... >Overview
The C2 configuration pairs an A2-6 spindle nose with a φ66 mm through-hole and a synchronous-belt drive. With a Φ200 mm housing and a 4,500 rpm maximum speed, this mechanical spindle is intended for medium-size ...