Measuring range: 2 mm - 25 mm
The capacitive measuring probes from Sylvac are capable of providing operators with measurements at a resolution of 0.0001 mm. These units can provide measurements within a range of 2 to 50mm, and with exceptional linearity ...
Inductive measuring probes specially designed for measurement by comparison Available in 2 versions: spring push and pneumatic push Long life precision bearing guidance (tested up to 13 million cycles) Resolution ...
Measuring range: 12.5 mm - 12.5 mm
• Resolution 0.1µm (standard) and 0.01µm (high resolution) • Max error : 0.6µm (high resolution) and 1µm (standard) • Repeatability : 0.08µm (high resolution) and 0.2µm (standard) • Absolute system with integrated correction, ...
High accuracy and linearity. Suitable for measuring components, and capable of measuring over the entire working range. Independent of machine controls. Very easy to read due to combined display: Graphic bar for dynamic ...
The basis for maximum flexibility The best articulating probe holder in its class enables you to reach virtually all angles via numerous single positions. The ZEISS RDS articulating probe holder ...
ZEISS Métrologie industrielle
Measuring range: 10 mm
GS-7710A is a pencil type linear gauge sensor. This compact gage is designed to fit into tight spaces. In addition to it's high durability and long life of more than 5 million cycles this gage meets the IP67 protection levels. IP67 means ...
Onosokki
Versatile, hard-wired touch probe for tool and workpiece measurement in highly productive conditions. Precise and fast measurements thanks to innovative, face-geared shark360 measuring mechanism with ...
Blum-Novotest
Dorsey Metrology countersink and chamfer gages offer fast, accurate measurement of the top diameter of tapered holes, countersinks, chamfers center drill holes, valve seats, etc. and are used for inspection of a large variety of part ...
LED notification of the reference position. Touch sensors provided with high precision stroke and interchangeable stylus for measuring different applications. For all materials POINT MASTER PRO PMP For conductive ...
BIG DAISHOWA
Measuring range: 1 mm
Resolution: 0.0005 mm
GemRedOn Machine Inspection probe isthe beston machine inspection solution for improving the machining efficiency of machine tools and reduce the reject rate. GemRed on machine inspection probes measure ...
... High-accuracy dimension, displacement, thickness measurement • - Low measuring force, high stability, low noise • - Exchangeable probe-head; easy operation and installation • - Protection against dust, splash, coolant, ...
SPECIFICATION NAME D4 CENTERING SENSER (3M) SIZE 60X60X142mm MATERIAL STAINLESS STEEL 420 32-36HRC
RAPID HOLDING SYSTEMS
The Diamond Caliper utilized with measurement controls, for semi or fully automatic manufacture. The unit functions by using PCD fine grit or natural diamond. The device can provide a natural diamond product, through using a convex, conical, ...
With tactile measurement it is common for a probe element connected to a probe system to touch the test area of the workpiece. This procedure wears out the probe ...
Crankshaft of Two Wheeler Non Contact Gauging Technique Cost Effective and Fast Inspection Operators skill is not required To measuring Center Distance between bearing OD diameter and Crank pin hole diameter, Bearing OD Diameter and Crank ...
Accurate Gauging and Instruments Pvt. Ltd
No.1 Shipping Quanitity. The Best-Selling Tool Setters in the world!! Machining Reliability and Machine Operating Rate of CNC Machining center improve. In addition to presetting tool length, tool setters can be used to tool off-set ...
Metrol
Measuring range: 0 mm - 25 mm
Resolution: 1 mm - 2 mm
Key-Features: -Measurement range: 2, 5, 10 and 25 mm -Linearity: ±0.2 %, optional ±0.1 % -Resolution: <1 μm -Operating temperature: -40...+125 °C, optional up to +180 °C -Spring return and bellow -Connection: Connector M12 or cable -Protection ...
Measuring range: 0 mm - 50 mm
Resolution: 0.1 µm - 1 µm
Key-Features: - High precision length gauges with photoelectric linear encoder - Measurement ranges up to 50 mm - Small range linearity up to 0.5 μm - Repeatability up to 0.3 μm - Resolution up to 0.1 μm - Incremental output RS-422 - ...
Precision half-bridge touch probe for in-process measurement in turning, milling and grinding processes. Complete sealing to IP67 allows use in the machine on the workpiece. The robust bearing also allows ...
The 3D probe, the samples actually all around (most competitors offer buttons that can only vertical buttons with a tip). The tactile scanner digitizer of CNC-STEP with an accuracy of about 0.03 mm. ...
Mechanical Edge Finder Model. MEF-1020/ MEF-420 1. After the spindle rotates, the edge finder approaches the workpiece slowly. 2. The side face moves slowly to the center, the rapid execution point is the measurement data. 3. ...
TORNG Industrial Co., Ltd.
Mechanical Edge Finder Model. MEF-1020/ MEF-420 1. After the spindle rotates, the edge finder approaches the workpiece slowly. 2. The side face moves slowly to the center, the rapid execution point is the measurement data. 3. Move ...
TORNG Industrial Co., Ltd.
Ceramic Edge Finder Model. CEF-1010/ CEF-1020 1. After the spindle rotates, the edge finder approaches the workpiece slowly. 2. The side face moves slowly to the center, the rapid execution point is the measurement data. 3. ...
TORNG Industrial Co., Ltd.
Measuring range: 0 mm - 200 mm
Optical Edge Finder Quickly locate work edges and save time to find position for Milling, Lathe Machine, and other machines. The scope of application includs processing material edge, and measuring inside and outside diameters of work-piece ...
Properties and application: Made of high-quality alloy steel Equipped with signaling LED Used to precisely determine the edge of a workpiece (zero setting) Ball hardness: 58 - 62 HRC Accuracy (repeatability) ...
Please specify:
Help us improve:
remaining