Flow rate: 25 l/min - 320 l/min
... priority valve OLS 320 High-flow priority valves are needed especially for large tractors, wheel loaders, motor graders and container trucks. The new Danfoss priority valve OLS 320 can ...
Controlled pressure: 75 psi - 150 psi
DN: 20 mm
3/4 in. (20mm) Description: Series 100XL Temperature and Pressure Relief Valves are used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply ...
Watts Water Technologies
DN: 25 mm - 200 mm
Pressure: 0.1 bar - 414.7 bar
Safety valves according to API 526 with standardized capacities and dimensions -Compliance with API 526 -Diverse selection of high-alloy materials available as standard -Longer lifetime due to hardened discs, partly ...
LESER GmbH & Co. KG
DN: 25 mm - 200 mm
Pressure: 2.5 bar - 256 bar
... that enables the following safety valve characteristics: -Tightness right up to set pressure -Operating pressures up to 97% of the set pressure -Low loss of medium due to short opening times -Function test and valve ...
LESER GmbH & Co. KG
DN: 25 mm - 200 mm
Pressure: 2.5 bar - 426 bar
... that enables the following safety valve characteristics: -Tightness right up to set pressure -Operating pressures up to 97% of the set pressure -Low loss of medium due to short opening times -Function test and valve ...
LESER GmbH & Co. KG
DN: 20 mm - 100 mm
Nominal widths: DN 25 – DN 100 (liquids) DN 20 (gases) ► DGRL 97/23/23 component part authorisation according to AD 2000 body of legislation ► for liquids and gases ► optimal blow-off performance with low flow resistance (a-value) ► ...
DN: 0.25 in - 1 in
Flow rate: 550 l/min - 4,000 l/min
SAFETY VALVES (Adjustable) Metal model, adjustable for several pressures
Controlled pressure: 3, 4, 4.8, 7 bar
Weight: 0.05 kg
A series of presetted valves with G1/4 connection both as regulators spare part and for systems. Available for 3 – 4 – 4.8 – 7 bar presetted pressions.
... inappropriate to use them in other different fields i.e. heating systems, domestic gas distribution networks etc. OXYTURBO valves are tested individually at 100% with digital machine and are supplied with an instructions ...
Weight: 0.06 kg - 0.25 kg
... between the mix output speed and the combustion rate. Our valves prevent the gas and flame back flows during welding work. In compliance with European standard EN 730-1, our valves contain: Valve ...
DN: 2 in - 16 in
... Surge Relief Control Valve Product Category: M&J CONTROL VALVES Surge-relief control is achieved by "loading" the plug cavity from a regulated nitrogen source. A line pressure surge above the ...
Controlled pressure: 0 bar - 250 bar
DN: 0.75 in
Flow rate: 22 l/min
... smooth response to pressure changes. Positive stops prevent springs from going solid. Compact size. Adjustments cannot be backed out of the valve. Industry common cavity. Hardened ...
Hydrabase
Controlled pressure: 0 bar - 350 bar
DN: 0.75 in
Flow rate: 40 l/min
... smooth response to pressure changes. Positive stops prevent springs from going solid. Compact size. Adjustments cannot be backed out of the valve. Industry common cavity. Hardened ...
Hydrabase
Controlled pressure: 0 bar - 20 bar
DN: 42 mm
Flow rate: 500 l/min
... response to pressure changes. The pressure fluctuation is low when the flow rate changes. Compact size. Adjustments cannot be backed out of the valve. Industry common cavity. ...
Hydrabase
Controlled pressure: 210 bar
Flow rate: 100 l/min
Adjustable pressure relief valves with ALU housing can be used working pressure up to 210 bar, the STEEL version is suitable to be used up to 350bar, the connections are ¾ or 1”, the nominal oil flow for these valves ...
DN: 1, 2, 3, 4 in
Pressure: 0.7 bar - 45 bar
The partial pressure relief valve model ARGOS Back Pressure (or Relief Valve) is pilot operated and controls upstream pressure instead of downstream. It has a simple construction design and few internal ...
DN: 0.75, 1 in
Pressure: 200 mbar - 14,000 mbar
Simple design, very compact and robust valve, this new version of JR Relief, Series CH, keeps the traditional features of spring actuated relief valve with diaphragm and spring actuation, ...
DN: 1, 2 in
Pressure: 10 bar
... increase in inlet pressure overcomes the set point the diaphragm set moves upward opening the valve and releasing the gas to atmosphere or outlet pressure. The valve keep opening until achieves enough ...
DN: 20, 25, 32 mm
Pressure: 16 bar
Weight: 2.1, 2.84, 2.88 kg
... gunmetal, stainless steel and plastic protection of overpressure in water heaters acc. DIN 1988 with pressure relief valve maintenance-free spindle gasket with self-lubricating EPDM lip gasket with ...
Kemper Olpe GmbH
DN: 65, 80 mm
Flow rate: 33, 43 m³/h
Pressure: 25 bar
single-seated valve with balanced plug gunmetal housing, interior parts made of gunmetal and stainless steel full metal version easy to maintain outlet pressure adjustable on lockable knurl with ...
Kemper Olpe GmbH
DN: 15 mm - 50 mm
Flow rate: 3.5 m³/h - 17.25 m³/h
Pressure: 16 bar
single-seated valve with balanced plug internal parts made of gunmetal, stainless steel and plastic easy to maintain PRV housing made of transparent plastic outlet pressure adjustable on lockable ...
Kemper Olpe GmbH
Controlled pressure: 16 bar
DN: 40 mm - 100 mm
STANDARDS OF MANUFACTURE EN 1074-1 VALVES FOR WATER SUPPLY EN 1074-4 AIR RELIEF VALVES EN 1092-2 (ISO 7005-2) DRILLING FLANGES MATERIALS BODY BRASS CuZn40Pb2 EN 12164 COVER BRASS CuZn40Pb2 EN ...
ACMO S.p.A.
Controlled pressure: 16 bar
DN: 12.7 mm
Model: - Spring loaded angle type - Material body: - Gunmetal Bronze CC499K Connection: - Female thread 1/2" BSPP - Material internal: - Brass CW617N Pressure: - Factory preset - Material spring: - Steel 1.1200 ASTM A228 Temperature: ...
Controlled pressure: 2 bar - 16 bar
DN: 40 mm - 300 mm
The main valve is a hydraulically operating diaphragm valve. The work energy is the inherent medium. Most valve types operate purely hydraulically without any foreign energy. Application ...
Controlled pressure: 0 bar - 16 bar
DN: 20 mm - 50 mm
Flow rate: 7.05 m³/h - 3,698.01 m³/h
The ADCA SRV6 series aseptic safety relief valves with angle type connections are designed for use with clean steam, air, water and other gases and liquids compatible with the construction materials. Main applications ...
Quick Exhaust Valves • G 1/4” to G 3/4" Quick Exhaust Vales are used to increase the cylinder piston speed by around 2 times.
Controlled pressure: 3,000 psi
4361 S Shock Strut Valve For operating pressure up to 3000 Psi conforms to AN-6287-1
DN: 28 mm
Pressure: 0.5 bar - 12 bar
Quick relief valve, G 1/8, AF1 14, AF2 14, AF3 14, Operating pressure max. 12 bar, Operating temperature -20 °C to 80 °C
RIEGLER & Co.KG
Controlled pressure: 16, 40 bar
DN: 20 mm - 150 mm
... Vertical Full-lift angle weight safety valve with flanged ends. The product is characterized by a high degree of tightness. Valves 570 may be applied to systems in which the pressure is from 0.1 to ...
ZETKAMA Sp. z o.o.
Controlled pressure: 63, 100, 16, 40 bar
DN: 20 mm - 400 mm
... iron, nodular cast iron, cast steel, acid resistant steel Working position: Vertical Full-lift angle spring safety valve with flanged ends. The body of the product may be made of: grey cast iron (DN 20-150 ...
ZETKAMA Sp. z o.o.
Controlled pressure: 16 bar
DN: 20 mm - 32 mm
... steam, glycol, compressed air and other neutral fluids. FEATURES valves made according to PN EN ISO 4126-1 high tightness for valves with soft sealing quiet work of valve raised ...
ZETKAMA Sp. z o.o.
Controlled pressure: 0.1 bar - 500 bar
DN: 0.38 in - 2 in
Safety- and Relief Valves, right angle, threaded Threaded Safety Valves, right angle; standard or full-lift-safety valves; event though as overflow-valves or regulating-valves; ...
Niezgodka GmbH
Controlled pressure: 0.1 bar - 500 bar
DN: 0.38 in - 1.25 in
Safety- and Relief Valves, right angle, threaded Threaded Safety Valves, right angle; standard or full-lift-safety valves; event though as overflow-valves or regulating-valves; ...
Niezgodka GmbH
Controlled pressure: 0.1 bar - 250 bar
DN: 15 mm - 65 mm
Flanged safety and relief valves, standard or full-lift valves; even though as overflow-valves; material steel / nodular iron or complete stainless steel; alternative with or without type-approval
Niezgodka GmbH
Controlled pressure: 6 bar - 10 bar
DN: 10 mm - 50 mm
The RIEGER Safety valve Type SH prevents excessive pressure in steam and gaseous media in plant components and tanks. The set pressure is generally higher than the operating pressure of the system. Already at 10% overpressure ...
Controlled pressure: 0 psi - 300 psi
DN: 1 in - 36 in
Flow rate: 55 us gal/min - 85,000 us gal/min
Cla-Val Pressure Relief Valves are hydraulically operated, pilot-controlled, modulating valves designed to maintain constant upstream pressure within close limits. Model 50-01 is the full port version ...
CLA-VAL Automatic Control Valves
Controlled pressure: 300 psi - 500 psi
DN: 1 in - 6 in
... replaced without emoval of the valve body from the pipeline. Air Release Mode—Valve is normally open. When line is filled or pump started, air is exhausted through the normally open ...
CLA-VAL Automatic Control Valves
Controlled pressure: 20 psi - 300 psi
DN: 1.5 in - 16 in
Flow rate: 55 us gal/min - 85,000 us gal/min
... for Surge-Free Operation • Adjustable Pressure Settings, Not Affected by Pressure At Valve Discharge The Cla-Val Model 50-20 Seawater Service Pressure Relief Valve is designed specifically to automatically ...
CLA-VAL Automatic Control Valves
Controlled pressure: 100 Pa
DN: 25 mm - 150 mm
SAFETY DEVICES PVS 803 PVS type slam shut valves are pilot-operated relief valves in which the opening and the closing of the main plug is controlled by a pilot device which is very sensitive to ...
Controlled pressure: 2 psi - 50 psi
DN: 0.25 in
The inline BelGAS Type P800 direct operating factory preset relief valve is designed for use in pneumatic applications that warrant protection from overpressurization. The Type P800 is used primarily between a pneumatic ...
Controlled pressure: 16 bar - 40 bar
DN: 25 mm - 250 mm
Spring-loaded, SV 6 with closed spring cap, SV 60 with open spring cap for steam / body made of GG-25, GS-C 25, CrNiMo steel
DN: 0.5 in - 20 in
Flanged safety valve that meet requirements of ASME Secc. VIII and API 526 available in different material options to fulfill any customer requirement.
EFSVALVES
Controlled pressure: 40 bar
DN: 0.5 in - 2 in
Threaded safety valve that meet requirements of EN standard according to PED/CE directive, in stainless steel material available either BSP or NPT threads.
EFSVALVES
Controlled pressure: 400, 100, 250 bar
DN: 0.5 in - 2 in
Threaded safety valve that meet requirements of EN standard according to PED/CE directive in stainless steel material available either BSP or NPT threads for pressures up to 400 bar [ 5.800 psi].
EFSVALVES
Please specify:
Help us improve:
remaining