HUMMEL power connectors

Primary current: 7 A
Voltage: 300 V
Operating temperature: -25 °C - 85 °C

... altering the WPJ connector which is a connector for power supply furnished with waterproof and non-waterproof performance. By placing the rubber parts to the normal receptacle assembly,it ...

Primary current: 3, 5 A
Voltage: 50 V
Operating temperature: -40 °C - 80 °C

... mating Standard 3A current rating PD 5A current rating option Improved internal and external RFI performance One connector with power charging, data transfer, DP video and audio capability Top mount, ...

Primary current: 16 A
Voltage: 600, 1,500 V
Pitch: 5.08 mm

Pin headers, Power Connector 5,08 mm Male power connectors for a current rate up to 16 Amps per contact Pincount - 4, 8 Gender - Male Polarising - yes Material ...

Impedance: 0 mOhm - 0 mOhm
Primary current: 30 A
Voltage: 8,000, 6,000 V

This connector is specifically designed for connecting photovoltaic system components. General features: Load capability with big current and high voltage Lower contact resistant Design of waterproof and dustproof UV-resistant Suitable ...

Voltage: 3.3 V
Data rate: 24.33 Gb/s - 25.78 Gb/s
Operating temperature: -40 °C - 85 °C

● Hot-Pluggable SFP28 Form Factor ● Single LC connector for Bi-directional link ● Maximum link length of 10km on SMF ● 1270/1330nm DFB laser and PIN photo-detector ● Built-in CDR on both Transmitter and Receiver ● ...

Primary current: 2 A - 46 A
Voltage: 800, 600, 1,500, 300 V
Operating temperature: -65 °C - 175 °C

... size 1 to multigang versions. EPX™ inserts will also cover any contact technologies including signal, power, quadrax and fiber optics. EPX™ connectors answer all connecting needs with the use of a limited ...

Primary current: 0 A - 30 A
Voltage: 0 V - 800 V
Pitch: 2 mm

CMM connectors are designed to meet or exceed electrical & mechanical performances of MIL-DTL-55302F and BS-9525-F0033 standards. This modular connector allows more than 20 million arrangements. Main ...

Primary current: 17.5 A
Voltage: 450 V

... of installation Joint connector (re-usable/re-accessible) Product configuration In-line connector Colour Black/Green (Plastic components) - Techno green (Rubber components) Overall dimensions (mm) Ø ...

... this series of rapid coupling reverse bayonet connector offers extreme versatility. They can be configured and manufactured in many materials and insert arrangements to accommodate electrical, data, power, ...

Primary current: 17.5 A
Voltage: 450 V
Operating temperature: -40 °C - 85 °C

EP Series 2 Pin Male Cable End Waterproof Connector Contact Resistance≤10mΩ Insulation Resistance≥500MΩ Wire Gauge：0.5~2.5mm² Housing Material：Engineering plastic Conductor Material：Copper alloy with Nickel plated Compliant ...

Primary current: 1 A - 3,000 A

FLAT COPPER BRAID CONNECTORS - made to measure The power braids consist of one or more flat bare or tinned copper braids with connection terminals. We can manufacture them in sections from 10 to 5000 ...

Primary current: 2 A
Voltage: 60 V

M12 and M8-Connectors / Adaptors for power supply and signal transmission for the fieldbus systems DeviceNet/CANopen or to double a port and also M8/M12 Valve Adaptors.

Primary current: 2, 1 A
Voltage: 12, 100 V

Power jack Ø 1.0 or 1.3 mm right angle type Technical specifications Current rating : 2 A DC, 1 A AC Voltage rating : 12 Volts DC, 100 Volts AC Dielectric withstanding voltage : 500 Volts AC during 1 mn Insulation ...

HomeConnect® Power Inserter for Subscriber Amplifiers with High Isolation

... Teflon, PP,PEI, Peek etc. Finishing: Zinc plating, Chrome plating, Nickel plating, Tin plating, Polishing, Anodizing, Power-coating, Oxide black, Sandblast Anodizing, Electroless nickel, Fe/Zn8/C PER ISO 2081, etc.

Primary current: 0.3, 3 A
Voltage: 30 V
Pitch: 0.55 mm

Panasonic’s R35K Narrow (Fine) Pitch Connector Series is an ultra-small 0.35mm pitch socket and header Connector pair that is available in a 4-pin solution. This Connector series uses ...

Male power connector, Contacts: 3+PE, unshielded, solder, IP65 with seal (accessories), UL, ESTI+, VDE, with flat seal NBR beige Technical specifications Connector design: ...

Power (DIN) connectors are available in FORM A & B (square and rectangle), with or without a moulded power cord. Special adapters, to take connection from FORM B to FORM A, are also ...

... and high quality at the same time. ・ M12 circular connector with excellent environmental resistance and easy connection. ・ M12A coding for sensor connection. Can be used in 2-wire, 3-wire, and power ...

Primary current: 50, 400 mA
Voltage: 12 V

PMU485 Smart Setup Hub 12 VDC Power source RS-485 Data connection Can support up to 10 Smart radiometers Works with DustIQ PMU485 Smart Setup Hub The PMU485 is a power source and data connection ...

Suitable for MIG/MAG machines with Z connec Power connection Integrated Gas connection Integrated

Primary current: 10, 16 A
Voltage: 250, 500 V

The connectors we provide in suport of wide ariety of hot runner connectors. They are mostly used for Hot Runner Manifold, Robot Interface, Power and Thermocouple connections for Plastics. ...

... cooled • High irradiation power •Very small dimensions / different lengths • Low weight •Different wavelengths available • Low temperature load • No warm-up phase •Appropriate for clean rooms The LED Powerline ...