Temperature limit: -25 °C - 120 °C
Diameter: 32 mm - 150 mm
for clamp connection according to DIN 32676 series A Short Info Description, addition to product name - for clamp connection according to DIN 32676 series A Construction / Material Specification of the connection solution - Liquid-tight ...
Temperature limit: -25 °C - 120 °C
Diameter: 32 mm - 150 mm
Sealing ring for solid, liquid and gaseous media in the food industry, pharmaceuticals and chemicals, for threaded spigots to DIN 11851 Specification of the connection solution - for threaded spigots with external milk pipe thread ...
Temperature limit: -35 °C - 100 °C
Pressure limit: 0 bar - 400 bar
Diameter: 18 mm - 250 mm
XT200 is an innovative rod seal developed for challenging high temperature applications that require both extrusion resistance and low leakage. Advantages • Superior static and dynamic sealing effect • Long service ...
KASTAS SEALING TECHNOLOGIES
Diameter: 9 mm - 57 mm
... O-Rings are designed for use with our Quick-Fit range of Cable Glands, enabling them to meet protection rating IP68 and to seal against oil, dust and water. Std. Color: black Material: Buna N
Diameter: 2 mm - 10 mm
Multi sealing Inserts. To allow multiple numbers of cables to enter into a single cable gland. Std. Color: black Material: Evoprene
Used primarily for banding round cable, Flat Seal BAND-FAST allows for consistent location banding on cable and casing. The short, flat seal is ideal for the lowest profile downhole applications.
Temperature limit: -35 °C - 100 °C
Pressure limit: 450 bar
Diameter: 20 mm - 499 mm
The Hunger TDI tandem seal for inside sealing is a piston rod seal. It can be used with mineral oils and in modifi ed form with water base fl uids, fi re resistant fl uids and compressed air. The ...
Hunger
An opening in the panel can be achieved by cutting the mesh wires during assembly. A special rubber gasket to fit the orifice is available on request, to provide protection for personnel.
Temperature limit: -29 °C - 180 °C
Pressure limit: 21 Pa
Diameter: 2, 3, 4 in
... balanced seal design provides safe and reliable operation Simple maintenance and fast replacement Single or double configurations for application versatility Available from stock within 24 hours The balanced seal ...
Our drive shaft sealing components serve to cover propshaft joints. They provide optimal protection under high dynamic stress. Continental axle boots are manufactured from thermoplastic elastomers and serve to protect the joints of ...
Temperature limit: 550 °C - 600 °C
Graphite Impregnated Fiberglass Wood Stove Door Replacement Gasket is manufactured from mechanically bulked fiberglass yarn and has been developed as an ideal medium for thermal insulation and heat sealing applications. The ...
Ningguo BST Thermal Products Co.,Ltd
Stainless Steel D Rings are used a lot in heat insulation fabrications, welding blankets, furnace curtains, fire blankets. Stainless Steel D Rings are one of small accessories used in thermal insulation engineering, customers generally ...
Ningguo BST Thermal Products Co.,Ltd
Stainless Steel O Ring is used for thermal insulation products, like expansion joints and removable-reusable thermal insulation blankets. Stainless Steel Lacing Anchors & Washers Generally Stainless Steel O Ring are used with our ...
Ningguo BST Thermal Products Co.,Ltd
Diameter: 0.13 mm - 450 mm
Outer diameter: 1.6 mm - 580 mm
... . PEEK, or Polyether Ether Ketone, represents a cutting-edge seal material known for its superior performance and adaptability. Designed to excel in challenging environments, PEEK seal material delivers ...
Taizhou Ark International Trade Co.,Ltd
Temperature limit: -30 °C - 260 °C
Outer diameter: 1 in - 28 in
PEEK Seal Material When reliability is non-negotiable, turn to PEEK (Polyether Ether Ketone) Seal Material. Engineered for excellence, PEEK seals combine exceptional durability, chemical ...
Taizhou Ark International Trade Co.,Ltd
Temperature limit: -30 °C - 260 °C
Elevate your valve system's performance with our specialized PEEK pipe inserts tailored for sealing valve seat inserts. Engineered with precision, these inserts provide a perfect fit, delivering consistent and dependable sealing performance, ...
Taizhou Ark International Trade Co.,Ltd
... of risk, danger and need for intervention. for panels with thickness from 6,3 to 6,8 mm inserted in 8 mm slots cut the gasket abundantly to compensate for shrinkage and elongation due to temperature excursion roll 200 mt
The panels, and consequently the accessories dedicated to their anchoring, must be correctly selected both in terms of materials, thicknesses, and dimensions of the mirrors. Internal visibility must be guaranteed in all situations where ...
Thermo gasket is a highly resilient textile gasket designed for high tempereture applications. The outer surface is composed of multitwined fiber glass yearn that found a rounded tube.To improve the resiliency ...
BONSING CORPORATION LIMITED
Temperature limit: 550 °C
... cord core, Diam. mm Diam. mm Tail length 6mm Thickness 2mm Heat resistance up to 550°C It is a highly resilent textile gasket designed for high temperature applications. The outer surface is composed of multiple ...
BONSING CORPORATION LIMITED
Temperature limit: 550 °C
Diameter: 6 mm - 16 mm
... 10mm Technical Overview: -Max Working Temperature: 550℃ -Size Range: 5mm-16mm -Applications: It can be used as a gasket or seal on boiler, cook oven, industrial oven and wood stove doors. -Colors: Black ...
BONSING CORPORATION LIMITED
Temperature limit: -40 °C - 130 °C
Can provide good compression characteristics, seal out dust/moisture, dampen rattle due to vibration, and compensate for surface contour irregularities. SPECMaterial : EPDM (soft quality)-black ; SPCC Temperature ...
Tai Sam Hardware Corporation
Can provide good compression characteristics, seal out dust/moisture, dampen rattle due to vibration, and compensate for surface contour irregularities. Spec Material : EPDM
Tai Sam Hardware Corporation
Temperature limit: -40 °C - 130 °C
Can provide good compression characteristics, seal out dust/moisture, dampen rattle due to vibration, and compensate for surface contour irregularities. SPEC Material : EPDM (soft quality)-black ; SPCC Temperature ...
Tai Sam Hardware Corporation
Diameter: 2.9 mm - 1,140 mm
DIN 3771, ISO 3601 o ring Technical details DIN - 3771 ISO - 3601
Diameter: 42 mm - 280 mm
Other seal rings Technical details SKU info - OIL SEAL 42X72X10 SB2 NBR Box quantity - 50
Temperature limit: -55 °C - 125 °C
Shore A hardness: 82 unit
... equipment. The function of a electrically conductive elastomer gasket is to maintain electrical continuity in the EMC shielding. The conductive filler used for our conductive silicone seals is adjusted ...
GETELEC
Temperature limit: -55 °C - 160 °C
Shore A hardness: 65 unit
GETELEC
Temperature limit: -55 °C - 200 °C
Shore A hardness: 65 unit
... a bi-material seal consisting of a conductive part and an insulating part, combined into a single seal by means of a co-extrusion principle. By separating the microwave shielding function from the environmental ...
GETELEC
Single or double lip seal O-ring seals, hydraulic seals, x-ring joints, made-to-measure seals.
Single or double lip seal O-ring seals, hydraulic seals, x-ring joints, made-to-measure seals.
... design The gasket code is qualified at the end by the winding metal type (eg. 316), by the filler type (eg. Graphite G) and, if present, by the centering ring metal type in accordance to the ASME B16.20. Applications Spiral ...
Carrara Global Sealing Solution
Temperature limit: -100 °C - 650 °C
Pressure limit: 1,500 bar
... other materials are available). This solution allows to protect the gaskets from the extrusion, offering great recovery and resistance for long time. Applications Gaskets for pressure seal valves.
Carrara Global Sealing Solution
Temperature limit: -100 °C - 650 °C
Pressure limit: 1,500 bar
... G33 is a die-formed graphite gaskets reinforced on the corners with metallic rings. This solution allows to protect the gaskets from the extrusion, offering great recovery and resistance. Applications Gasket ...
Carrara Global Sealing Solution
PTFE (Polytetrafluoroethylene) gasket is a type of sealing gasket that is widely used in various industries for its excellent Chemical résistance, thermal stability, and low friction properties. PTFE ...
Temperature limit: -40 °C - 150 °C
Pressure limit: 120 mbar
Adhesive Vents Informaiton: MP: 17.5*12.5mm Airflow: 1200ml/min (p=1.25mbar) Water entry pressure : -120mbar(>1M) IP: IP67 Temperature resistance : -40℃ ~ +150℃ Material: - Membrane : e-PTFE * OEM, just for industrial usage, ...
Temperature limit: -40 °C - 170 °C
Diameter: 20 mm - 80 mm
Outer diameter: 42 mm - 110 mm
... groove improves the seal efficiency – even without any shaft rotation. The option of saving sealing air and increased maintenance intervals are offering a considerable commercial progress and advantage. GMN non-contact ...
GMN
Temperature limit: -40 °C - 200 °C
Diameter: 10 mm - 50 mm
Outer diameter: 30 mm - 90 mm
Non-contact seals series CF are specifically designed for spindle bearings and offer highest efficiency with absolutely leak tightness within a minimized space of 6 mm width only. The labyrinth design is a combination ...
GMN
Temperature limit: -40 °C - 200 °C
Diameter: 15 mm - 210 mm
Outer diameter: 26 mm - 250 mm
... design, GMN labyrinth seals guarantee completely frictionless operation. Wear-free: GMN seal components work completely wear-free and offer an unlimited service life. Abrasion-free: The ...
GMN
Temperature limit: -35 °C - 110 °C
Pressure limit: 250 bar
Diameter: 12 mm - 200 mm
The RSO seal type has been developed to replace or work jointly with stepseals in PTFE, because of the same groove dimension. Internally it has a round groove where an O-ring can be inserted and housed. The O-Ring acts ...
ARTIC SEALS
Temperature limit: -30 °C - 90 °C
Pressure limit: 20 bar
Diameter: 6 mm - 50 mm
The SRS rod seal has been designed for pneumatic cylinder applications. The SRS can also be used for pneumatic valves where allowed by the overall dimensions. Moreover a shorter machining of the system can be obtained ...
ARTIC SEALS
Temperature limit: -30 °C - 90 °C
Pressure limit: 20 bar
Diameter: 12 mm - 63 mm
... groove is completely open with a lateral milling, which allows the wiper to be replaced easily. The special profile combining seal and wiper is very strong and allows important rod misalignments without any danger of ...
ARTIC SEALS
Temperature limit: -30 °C - 150 °C
Pressure limit: 25 MPa
Bonded seals are metal washers with a vulcanized trapezoidal elastomer sealing lip being used as static seals for screw connections and flange seals. By tightening the screw, the elastomer ...
DICHTOMATIK SAS
... high-quality steels, PBI has developed a range of TecHeat® Seal VD/VODs ensuring a seal which perfectly meets your expectations and the various constraints of the application. These are made-to-measure ...
Porteret Beaulieu Industrie (PBI)
PIT furnace sealing Energy savings >15% per year (*) Improved sealing Service life multiplied by 20 Less knife deformation (* 12 ovens of 80 T) Find out more PBI has developed a Range of Sealing Mattresses with optimal use ...
Porteret Beaulieu Industrie (PBI)
frame seal / Sealing joint / flat / rectangular / circular Made to your templates for optimal placement Checks and tests before shipment Easy and very quick assembly: 1 frame = 1 complete seal Maximum ...
Porteret Beaulieu Industrie (PBI)
Please specify:
Help us improve:
remaining