KOBOLD gas flow meters

Volumetric flow rate: 0.5 l/h - 130,000 l/h
Process temperature: 0 °C - 350 °C
Process pressure: 0 bar - 16 bar

The fluid flows from bottom to top through the meter tube of the flowmeter. The float is lifted until an annular gap between the meter ring and the cone-shaped float is produced which ...

Mass flow rate: 81 kg/h - 1,324,739 kg/h
Volumetric flow rate: 5.2 m³/h - 85,371 m³/h
Process temperature: 0 °C - 400 °C

The KOBOLD Vortex Flowmeter DVE utilises three primary sensing elements: a vortex shedding velocity sensor, a RTD temperature sensor and a solid-state pressure transducer to measure the mass flow rate ...

Volumetric flow rate: 0.3 l/h - 160 l/h
Process temperature: 0 °C - 100 °C
Process pressure: 16 bar

The flowmeters and switches for very low flows model KDF and KDG for liquids and air operate on the suspended float principle: that is, the installation position is vertical and the direction ...

Volumetric flow rate: 0.1 l/h - 200 l/h
Process temperature: -40 °C - 130 °C
Process pressure: 0 bar - 420 bar

The fluid flows from bottom to top through the meter tube of the flowmeter. The float is lifted until an annular gap between the measuring cone and the float is produced which corresponds to the flow. ...

Volumetric flow rate: 1.5 l/h - 1,000 l/h
Process temperature: 0 °C - 140 °C
Process pressure: 10 bar

KOBOLD plastic flowmeters and switches model KSK are based on the well known suspended float principle. They are used for measuring and monitoring flows in closed pipes. The media flows, ...

Volumetric flow rate: 0.5 m³/h - 1,500 m³/h
Process temperature: -40 °C - 300 °C
Process pressure: 0 bar - 40 bar

... Kobold flap flowmeter type TSK is suitable for flow measurement of liquid products in pipes. The special advantage is that it can be used for all directions of flow. It shows the current ...