Level switches

Process pressure: 0 bar - 10 bar
Process temperature: -30 °C - 100 °C

The Capanivo® level limit switch can be used in many solids and liquids as a full, demand or empty detector. The robust, glass reinforced PPS (Polyphenylene Sulfide) sensor is even suitable for food ...

Process pressure: 0.9 bar - 10 bar
Process temperature: -40 °C - 1,100 °C

The Rotonivo® RN 3000 is a level limit detection device which is suitable for any bulk products and in high-risk settings. It functions based on an easy and dependable measurement principle which requires no maintenance. ...

Process pressure: -1 bar - 16 bar
Process temperature: -40 °C - 150 °C

The Vibranivo® VN 2000 Model is ideally suitable for fine grained and powdery bulk goods applications. It is built with a sturdy die-cast aluminum housing and with a protection rating of IP 66. This unit features a compact design, free ...

Process pressure: 0 bar - 64 bar
Process temperature: -40 °C - 150 °C

... intelligent limit switch for all kinds of liquids The vibrating level switch of the LFV200 product family detects the pre-defined levels in liquid systems with maximum ...

Process pressure: 0 bar - 16 bar
Process temperature: -50 °C - 250 °C

... food industry. While the LBV311 compact device is used for horizontal mounting, the LBV321 cable-extended switch and the LBV331 tube-extended switch are used for vertical mounting in silos and bridge ...

Process pressure: 0 bar - 64 bar
Process temperature: -50 °C - 250 °C

... robust – Tuning Forks for all kinds of liquids The LFV300 product family of universal vibrating level switches precisely detects predefined liquid levels in systems to the millimeter – even under difficult ...

Process pressure: 0 Pa - 600,000 Pa
Process temperature: 0 °C - 200 °C

Nominal pressure: PN 8 according to DIN Operating temperature: -29 to 120°C Ambient temperature: -29 to 120°C Switching difference: Fix 12 mm Material wet side: PTFE (sealing strip with 25% glass fibre) Housing material: stainless ...

Process pressure: 25 bar
Process temperature: 0 °C - 300 °C

... Micro switch, change-over contact (SPDT) with silver contacts Switching capacity: 250 VAC, 5 A / 30 VDC, 5 A Protection class: IP65 Fitting length (tank side): ...

Process pressure: 0 bar - 250 bar
Process temperature: 0 °C - 250 °C

... Operating temperature: 0 to 120°C Safety Integrity Level (SIL): SIL 1 (Type AA 01 051: SIL 2) > Type A 01 052 Protection bellows silicone Operating temperature: 0 to 200°C Safety Integrity Level ...

Process pressure: 0 bar - 16 bar
Process temperature: -40 °C - 150 °C

SITRANS LVS300 is a vibrating rod point level switch for high, low, or demand level detection of bulk solids. The durable single rod probe avoids bridging and withstands harsh application ...

Process pressure: 0 bar - 10 bar
Process temperature: -30 °C - 100 °C

Pointek CLS100 is a compact 2-wire inverse frequency shift capacitance switch for level detection in constricted spaces, interfaces, solids, liquids, slurries and foam. Pointek CLS100’s short insertion ...

Process pressure: 10 bar - 25 bar
Process temperature: -40 °C - 125 °C

Pointek CLS200 is a versatile inverse frequency shift capacitance level switch with optional rod/cable choices and configurable output, ideal for detection of liquids, solids, slurries, foam and interfaces. ...

... economical float switch with a single switch point, designed specifically for the needs of OEM customers. With its compact dimensions, it is particularly suitable for monitoring dry running or the overfilling ...

... functionality The successful design and the excellent functionality of the WIKA switch family were already confirmed by winning the “iF product design award” for the pressure switch model PSD-30. The ...

Process pressure: 0 bar - 40 bar
Process temperature: -196 °C - 350 °C

... Float switches are also available with multiple switch points. Applications of the float switch Level measurement for almost all liquid media Pump and level control ...

752.711 Level switch for drum pumps...... .................. Medium: Oil Max. number of switching points Level: 1 Material pipe: PUR Material float: PUR

Switch with licence Automotive Industry, Germanischer Lloyd, Mining

... bi-stable Contacts. NO and NC contacts are also adjustable. Available with or with out surge shrouds and as Level Switches or as combinations of Level-, and Temperature Switches.

Process pressure: -1 bar - 16 bar
Process temperature: -50 °C - 250 °C

Vibration Level Switches for solids Cement or aggregates are placed in interim storage in multiple chamber silos. When the chambers are filled, large quantities of dust are generated. Depending on the consistency of ...

Process pressure: -1 bar - 16 bar
Process temperature: -196 °C - 450 °C

Universal vibration level switches for liquids OPTISWITCH 4000/5000 series operates using a vibrating fork to reliably detect the level of liquids independently of adhesion on the fork, container vibrations ...

Process temperature: -40 °C - 200 °C

Switch for level detection and dry-run protection The OPTISWITCH 6500 and OPTISWITCH 6600 are hygienic level switches for level detection and dry-run protection for ...

Process pressure: 40 bar
Process temperature: -40 °C - 150 °C

Liquiphant FTL31 is a point level switch for liquids. The FTL31 is designed for industrial applications in all industries, mainly the machinery industry. The Liquiphant is used for overfill ...

Process pressure: 40 bar
Process temperature: -40 °C - 150 °C

Liquiphant FTL33 is a point level switch for liquids. The FTL33 is especially designed for food & beverage applications where hygienic requirements are requested. The Liquiphant is used for overfill prevention ...

Process pressure: 100 bar
Process temperature: -50 °C - 150 °C

Liquiphant FTL51 is a point level switch with extension tube for use in hazardous areas with all international certificates. Useable in all industries. FTL51 offers functional safety SIL2/SIL3. With the ...

Process pressure: 0 bar - 64 bar
Process temperature: -50 °C - 250 °C

The VEGASWING 61 represents a completely universal level switch that shows excellent performance, and can be used in all liquids. It has a millimeter level accuracy, and can be used either ...

Process pressure: 0 bar - 64 bar
Process temperature: -50 °C - 250 °C

... housing and electronics versions. VEGASWING 63 is used as a universal level switch in all liquids. Independent of the mounting position it detects reliably with millimetre accuracy the level. ...

Process pressure: 0 bar - 160 bar
Process temperature: -196 °C - 450 °C

VEGASWING 66 vibrating level switch shows excellent performance in various applications and can be used in all liquids. It offers detection on a millimeter level. The design is compact, ...

Process pressure: 10 bar
Process temperature: -40 °C - 80 °C

... ±0.5 mm in water Frequency: 400 Hz Supply Voltage: 12 to 28 Vdc Consumption: 25 mA maximum Relay: 60 VA, 1 A maximum Switch Output: SPST Selectable NO or NC states Temperature Range: -40 to 80°C Pressure Range: ...

... Series Mechanical Level Switches are the most rugged and durable liquid point-level detection products in the industrial marketplace today. Overview ABB's LS Series Mechanical Level ...

Process temperature: 0 °F - 800 °F

The LMS200 electric switch is a magnetically actuated double pole double throw switch. When the LMS200 is mounted on a KM26 magnetic liquid level indicator, LS series cage level ...

Process pressure: 103, 10.3, 7 bar
Process temperature: -40 °C - 760 °C

The A75 RF level switch is used in dry bulk and liquid applications and special applications, such as, high temperature, corrosive environments, high pressure and special probe materials.

Process pressure: -1 bar - 100 bar
Process temperature: -40 °C - 200 °C

Reliable in various media Wide variety of process connections For hygienic and industrial applications With marine, ATEX, WHG and cUlus approval Process temperatures up to 200 °C

Process pressure: -1 bar - 100 bar
Process temperature: -40 °C - 200 °C

Point level detection based on frequency sweep technology for high-temperature hygienic applications Process temperatures up to 200 °C Housing design with 360° status indicator For hygienic and industrial ...

Process pressure: 0 bar - 10 bar
Process temperature: -40 °C - 121 °C

... of these reed switch designs ensures long, trouble-free service. Because the effects of shock, wear and vibration are minimised, these hermetically sealed switches provide precise repeatability with no more than 1% deviation. ...

Process pressure: 0 bar - 68.95 bar
Process temperature: -40 °C - 149 °C

... sealed single point level switch closes as the float comes into proximity of the reed switch. The switch logic can be reversed on most models by inverting ...

Process pressure: 0 bar - 1.72 bar
Process temperature: 0 °C - 100 °C

... chemical compatibility for general purpose use. Also ideal for oils and water. A medium-size solution for ultra-pure liquid level sensing. Made of corrosion resistant PTFE for low particle generation.

Process pressure: -1 bar - 64 bar
Process temperature: -50 °C - 250 °C

The VEGASWING 61 is the universal switch that can be used in all liquids. Not having to depend on the mounting position, it accurately detects to the millimetre the level limit. Instrumentation can be ...

Process pressure: 0 bar - 16 bar

The VEGAVIB 61 is a vibrating level switch typically used for granulated bulk solids. It is fitted with a streamlined vibrating rod that prevents any blockage or jamming producing accurate and precise ...

Process pressure: -1 bar - 64 bar
Process temperature: -50 °C - 200 °C

The capacitive rod electrode, VEGACAP 62, is designed for level detection that can be optimized in various aspects of industry. The two electrodes of the capacitor were created by the sensor and vessel form. Operation ...

Process pressure: 1,000 psi
Process temperature: 232 °C

... powered two wire level switch is an excellent choice for most of your point level and overfill protection needs. ThePoint offers many of the features and benefits of the IntelliPoint, ...

Process pressure: 69 bar
Process temperature: 232 °C

The IntelliPoint loop powered two wire point level switch is our most versatile point level switch for liquids, slurries, granulars, and interface applications. The IntelliPoint ...

B/W Controls' line of electrodes has been developed to provide a practical, economical solution to almost every conceivable application and installation problem. Some of the applications that the B/W Controls electrode sensors are ...

Process pressure: 0 bar - 100 bar
Process temperature: 0 °C - 150 °C

Magnetic Level Switches M For liquids Contact: max. 4 reed switches Connection: G ⅛ ... G 2 male thread, flange DN50 ... DN125, 1½ ... 4" Material: brass, stainless steel, PVC-U, PP, PVDF, NBR pmax: 100 bar tmax: ...

Process pressure: 0 bar - 100 bar
Process temperature: 0 °C - 150 °C

Contact: max. 3 reed switches Connection: G ⅜, G 1½, G 2 male thread, 1½" NPT, 2" NPT male thread, flange DN40 ... DN125, ANSI 1½ ... 4" Material: brass, stainless steel, PVC, PP pmax: 100 bar tmax: 150°C Liquid density: from 0.6 g/ml

Process pressure: 0 bar - 10 bar
Process temperature: 0 °C - 150 °C

Bypass Level Switch NBA, NBE For liquids Contact: 1 reed switches Connection: G ⅜ , R ½ Material: aluminum, stainless steel pmax: 10 bar tmax: 150°C Liquid density: from 0.65 g/ml

Process pressure: 0 bar - 5.5 bar
Process temperature: 0 °C - 125 °C

... tubular float level sensor is equipped with a TEFLON cable and a specially designed PTFE housing for extremely aggressive liquids, such as for example sulfuric acid and very hot liquids reaching temperatures up to 125 ...

This level detector is particularly suitable for detecting the level of very light powder and bulk products. It consists of two parts: The level detector ...

Process pressure: 0 bar - 3.5 bar
Process temperature: 85 °C

Built with an external adjustable resin ballast, the SOBA SMALL is a level regulator. To open a circuit that is connected to an electrical panel, the mechanical switch on the interior will tilt when the ...

Process temperature: -40 °C - 85 °C

The DRS-303 is manufactured by Simex. It is a liquid sensor type, that is especially designed for conducted liquid presence detection. T parameters of the detector are constant to allow detection of actual presence of liquid on its electrodes ...

Just by mounting the switch on a pipe, the surface of the liquid can be easily detected. Description The HPQ-T is designed specifically for liquid level detection by non-contact methods in clear or very ...

Process pressure: -49,000 Pa - 490,000 Pa
Process temperature: -25 °C - 70 °C

... light beam. This Fail-safe detection is available by using two different sensing methods for the upper and lower limits on the level of liquid in a tank. Description Unlike all known competitive models, the HPF-T032(E) ...

All-resin structure ensures no metal contamination. The HPF-D027 and -D033 are both made out of PFA tubing with no metal parts, even on the inside. Features Problems due to liquid accumulation are reduced by Azbil Corporation's ...

Process temperature: -40 °C - 85 °C

The Elobau float switch 298 series is used to monitor the fill levels in water, hydraulic oil as well as fuel tanks. It can work on temperatures ranging from -25°C up to 80°C with a short operation duration ...

Process temperature: -30 °C - 85 °C

The Float Level Switch Series 351TEG is manufactured by ELOBAU. The maximum total resistance measures 910 mm and the protection class P70 that measures 0.6 W. Lastly, the temperature range is IP 67 or IEC 529.

Process temperature: -30 °C - 110 °C

The Float Switch is manufactured by Elabau Sensor Technology, and developed for SCR exhaust technology. The necessary urea is only stable in a defined temperature range. The minimum temperature range is -30°…+110°C and ...

Process pressure: 5 bar
Process temperature: -20 °C - 120 °C

... reproducible ●Normally open or normally closed contact ●Plug connection Characteristics Mechanical level monitor for fluid media, with contact-free triggering of a reed contact.

Process pressure: 3 bar - 6 bar
Process temperature: -20 °C - 130 °C

... outside ●Highly reproducible ●Normally open or normally closed contactCharacteristics Mechanical level monitor for fluid media, with contact-free triggering of a reed contact.

Process pressure: 10, 25 bar
Process temperature: -20 °C - 110 °C

Highly reproducible ●Normally open or normally closed contactCharacteristics Mechanical level monitor for fluid media, with contact-free triggering of a reed contact.

Process pressure: 10, 16 bar
Process temperature: -20 °C - 150 °C

Liquid level switch actuated by a magnetic field of the float. Application areas Dosing tank, auxiliary tanks in food machinery, textiles, chemicals, control of naval transport level, ...

Process pressure: 10 bar - 400 bar
Process temperature: -50 °C - 300 °C

... Materialss: EN 1.4404 (AISI 316L), PVC, PP, PTFE, PVDF Level detection: Micro-switch contact (AMM), reed switch (AMR), pneumatic switch(AMP), ...

Process pressure: 25 bar
Process temperature: -30 °C - 150 °C

Vibrating fork level swtich for liquids and solids. Compact and Robust. High resistance to high temperatures and pressures. Possibility of selection of activation, with or without the presence of product, and detection ...

Process pressure: 0 bar - 20 bar
Process temperature: -40 °C - 125 °C

Die optoelektronischen Miniatur-Grenzwertschalter der OLP-Serie verzichten auf jegliche beweglichen Bauteile und unterscheiden zuverlässig zwischen Flüssigkeit und Gas. Die Kunststoffgehäuse aus Polysulfon bieten eine hohe Medienverträglichkeit. ...

Process temperature: -30 °C - 80 °C

The LS01 Series of Magnetic Float Level Switch, manufactured by Standex-Meder Electronics, is built with dual versions. The PP or Polypropylene, is designed for water applications and dilute acids. The ...

Process temperature: -40 °C - 160 °C

... must be mounted vertically to the top or lowest part of a tank to recognize a solitary low level or abnormal amount of liquid. It has a six various internal switch models in minimal cost, high power, ...

Process pressure: 0 bar - 12 bar
Process temperature: 0 °C - 200 °C

... Multi-Point Magnetic Float Level Switch, manufactured by Standex-Meder Electronics, is configured in robust stainless steel design with personalized one or multi-point level sensor. It ...

Process temperature: -20 °C - 130 °C

The LS Series, manufactured by New Flow®, is a level system switch that features a wetted part material, accessible in SS304,SS316, PVC, PP, PVDF as well as a multiple point level upon ...

Process pressure: 10 bar
Process temperature: -20 °C - 130 °C

New-Flow's SLS_Series Flow-Type Liquid Level Controls exhibit integrated guide tubes made out of SS316-grade materials, floats (PP or SS316-grade materials), and either SPDT or SPST switch modes. These ...

Process pressure: 3,000,000 Pa
Process temperature: -20 °C - 150 °C

... Temperature Limits:-20ºC to +150ºC Pressure Limits:3.0 MPa (30 kg/cm2); option: up to 4.5 MPa Switch Function:Micro switch 1 x SPDT, 2 x SPDT option Switch Rating:3A/250VAC, ...