Process temperature: -40 °C - 150 °C
Process pressure: -1 bar - 64 bar
... The VEGASWING 53 is used as a universal level switch in liquids with small dimensions. Independent of the mounting position, it detects reliably with millimetre accuracy the limit level. The position ...
VEGA Grieshaber KG
Process temperature: -50 °C - 250 °C
Process pressure: 0 bar - 64 bar
... VEGASWING 63 The VEGASWING 63 is used as a universal vibrating level switch for all liquids. Independent of the mounting position, it detects reliably with millimetre accuracy the limit level. The instrument ...
VEGA Grieshaber KG
Process temperature: -50 °C - 250 °C
Process pressure: 0 bar - 64 bar
... The VEGASWING 61 represents a completely universal level switch that shows excellent performance, and can be used in all liquids. It has a millimeter level accuracy, and can be used either full or empty. ...
VEGA Grieshaber KG
Process temperature: -40 °C - 150 °C
Process pressure: 0 bar - 64 bar
... Vibrating level switch for liquids For liquids (density: > 0.5 ... 2.5 g/cm³) Application area It detects the limit level reliably and with millimetre accuracy directly at the mounting position. ...
VEGA TECHNIQUE
Process temperature: -40 °C - 150 °C
Process pressure: 0 bar - 64 bar
... 11851 Seal material no media contact Housing material Plastic Stainless steel Protection rating IP67 IP 65 Output Contactless electronic switch Transistor (PNP) IO-Link Ambient ...
VEGA TECHNIQUE
Process temperature: -50 °C - 250 °C
Process pressure: 0 bar - 64 bar
... Plastic Aluminium Stainless steel (precision casting) Stainless steel (electropolished) Protection rating IP66/ IP67 IP66/ IP68 (1 bar) IP 65 ...
VEGA TECHNIQUE
Process temperature: -40 °C - 150 °C
Process pressure: 25 bar
... Lidec liquid level switches are liquid level sensors for overfill protection that ensure safety as well as simpler, cost-effective maintenance. What Is It? Lidec is a no-moving-parts liquid ...
Process temperature: max 200.0 °C
... 0.75 for less 0.5M Enclosure Housing: EDX-Explosion Proof: please check the ordering information; EDW-Weather Proof: IP 65 Micro Switch Rating(SPDT & DPDT Type): 5A/125VAC, 5A/250VAC, 2A/30VDC Max. Temperature: ...
Golden Mountain Enterprise
Process temperature: -20 °C - 130 °C
Process pressure: 10 bar
... please refer to the float specification Switch Mode: SPDT Setting Point: One float point or Two float points Housing Model: DIN 43650 -According to EN 175301-803 for 3 poles -For using One float point only - IP 65 ...
Golden Mountain Enterprise
Process temperature: -20 °C - 350 °C
Process pressure: 3, 4.5 MPa
... Limits: Without Test Device: 3.0 MPa (30 kg/cm2), option: up to 4.5 MPa; With Test Device: 6 kg/cm2 Switch Function: Micro switch 1 x SPDT; 2 x SPDT option Switch Rating: 3A/250VAC, 5A/125VAC, 4A/30VDC Conduit ...
Golden Mountain Enterprise
Process temperature: -40 °C - 150 °C
Process pressure: 40, 25 bar
... produced and the output state reverts to indicate material absence. SCX Tuning Fork Level Switch Application Scope It is applicable to the max. and min. level detection of the tanks or tubes filled ...
FineTek Co., Ltd.
Process temperature: -40 °C - 200 °C
Process pressure: 10 bar - 40 bar
... Series is a magnetic float level switch specifically designed for mounting on the side of a vessel where float orientation is horizontal. It is suitable for industrial use with a wide range of fluids ...
FineTek Co., Ltd.
Process temperature: -20 °C - 200 °C
... magnetic float level switch product line. They are top mounted units designed to provide cost-effective multiple switch points using a single entry point into the vessel. Description The FC/FD series ...
FineTek Co., Ltd.
Process temperature: -20 °C - 120 °C
Process pressure: 0 bar - 10 bar
... Electromagnetic level indicators to one or two contacts 3/4" Bsp threaded Connection SPST or SPDT Contacts USE: Made to ensure, with maximum safety, the minimum or maximum level of liquids in tanks and hydraulic ...
Fratelli Giacomello
Process temperature: -20 °C - 120 °C
Process pressure: 0 bar - 10 bar
... Electromagnetic level indicators at a control point SPST or SPDT Contact USE: Made to ensure, with maximum safety, the minimum or and empty levels of liquids in tanks, and hydraulic power packs containing mineral ...
Fratelli Giacomello
Process temperature: -20 °C - 120 °C
Process pressure: 0 bar - 10 bar
... Electromagnetic level indicators with double contact or min-empty contact SPST Contacts USE: Made to ensure, with maximum safety, the minimum or and empty levels of liquids in tanks, and hydraulic power packs containing ...
Fratelli Giacomello
Process temperature: -20 °C - 60 °C
... density of the product. Usage tips : The SOLIBA PRP rotary vane level detector can also be used as an intermediate level to detect a given level For the low level, ...
Process temperature: -20 °C - 60 °C
... density of the product. Usage tips : The SOLIBA PRA rotary vane level detector can also be used as an intermediate level to detect a given level For the low level, ...
Process temperature: -40 °C - 130 °C
... request)
- Straight stem: LS (standard), WLS
ASIT ITALIA
Process temperature: -20 °C - 150 °C
Process pressure: 4.5 MPa
... strong>AI.LT201 is a magnetic float level switch designed for horizontal liquid level control. Robust, reliable, and constructed entirely of stainless steel, it is ideal for industrial ...
ASIT ITALIA
Process temperature: -20 °C - 350 °C
Process pressure: 4.5 MPa
... is a float level switch designed for precise and reliable liquid control in horizontal installations. Thanks to its magnetic coupling mechanism, this device actuates a microswitch to provide an ON-OFF signal, making ...
ASIT ITALIA
Process temperature: -40 °C - 70 °C
... high-performance data logger for storage of measurement values. Water level measurement in water level stations with float shaft and in pipes from Ø 4 " Parameters: Water level [m],[cm] Sensor: Shaft ...
Process temperature: -20 °C - 70 °C
... The RG Series Level Sensors have been designed to indicate the presence or absence of bulk materials such as grains, pellets, chemicals, wood chips and other powders. The detection of material is achieved by a rotating paddle. If material ...
Process temperature: -20 °C - 50 °C
... The Auto-Set flush probe represents a low profile RF capacitance plug switch level monitor. The unit is specifically designed for used in tight fitting applications to detect levels of liquids, powders ...
Process temperature: -40 °C - 70 °C
... Product overview
Suitable for any type of silo and hopper for minimum or maximum
level control. No counter electrode required. Works with powdered products with variable dielectric or that pack, such as:
- milk powder
- coffee
Process temperature: 0 °C - 300 °C
Process pressure: 25 bar
... aluminium Flange square 92 x 92 mm, 92 mm PCD Switch element Microswitch SPDT with silver contacts Switch rating 250 VAC, 5 A / 30 VDC, 5 A Overall length (tank) 226 mm Safety integrity ...
Trimod'Besta
Process temperature: 0 °C - 300 °C
Process pressure: 25 bar
... aluminium square 92 x 92 mm, PCD 92 mm Switch element Microswitch SPDT with silver contacts Switch rating 250 VAC, 5 A / 30 VDC, 5 A Overall length 278 to 561 mm, depending on type Safety Integrity ...
Trimod'Besta
Process temperature: 0 °C - 300 °C
Process pressure: 25 bar
... aluminium Flange square 92 x 92 mm, PCD 92 mm Switch element Microswitch SPDT with silver contacts Switch rating 250 VAC, 5 A / 30 VDC, 5 A Overall length 309 mm, 409 mm or 509 mm Safety Integrity ...
Trimod'Besta
Process temperature: -30 °C - 130 °C
Process pressure: 0 bar - 50 bar
... that, for variety of materials and dimensions, offers to the user a simple and economical solution forthe control of liquid levels. The units are available with connection cable in lengths of 1.5 m and 3.0 m, other lengths are available ...
VAL.CO srl
Process temperature: 0 °C - 90 °C
Process pressure: 0 bar - 4 bar
... the OEM market that, for material and size, it offers to the user a simple and economical solution to control the liquid level. The unit is supplied with 500 mm leads length; other lengths are available on request. The contact ...
VAL.CO srl
Process temperature: -30 °C - 105 °C
Process pressure: 0 bar - 30 bar
... Level controls with 1 electrical contact, reliable, compact and easy to install. Designed to offer a range of level switches to meet the request for a cheap monitoring of the level in small tanks. Rugged ...
VAL.CO srl
Process temperature: -30 °C - 105 °C
Process pressure: 0 bar - 20 bar
... combination with a comprehensive set of options make the DLF 8980 suitable for a wide range of industrial applications. The magnetic float which activates reed contacts inside the guiding rod provides a measuring resolution ...
Trafag AG sensors & controls
Process temperature: -10 °C - 90 °C
... 0.5~1.0KG-cm torque 1 RPM speed SPDT switch output 220VAC or 24VDC supply IP 65 protection class Pedal type options MSS series rotary paddle switches are used ...
ATEK SENSOR TECHNOLOGIE
Process temperature: -20 °C - 80 °C
Process pressure: -0.1 bar - 0.5 bar
... The KOBOLD level monitor devices model NSC are used for the monitoring of minimum and maximum levels in silos and depots. They are working on the capacitive principle and can be supplied in two different designs. They ...
KOBOLD Messring GmbH
Process temperature: -10 °C - 60 °C
... The level controls propeller indicators SEP are employed for level control in tanks that contain powders or granulars. The indicator’s working is very simple: a synchronous motor that rotates at low speed activates a ...
FIAMA
Process temperature: -20 °C - 200 °C
Process pressure: 0 bar - 16 bar
... Product properties - Limit switch or differential switch versions - Adjustable sensitivity - Adjustable time delay - High or low fail-safe mode - All wetted parts stainless steel - Compact unit ...
NIVELCO Process Control Co.
Process temperature: -40 °C - 230 °C
Process pressure: -1 bar - 64 bar
... life. 5. Functional safety: fork body damage monitoring. ô.One-piece stainless steel housing (optional): can reach IP68 protection level. ...
Process temperature: -20 °C - 80 °C
Process pressure: 1 bar
... for level and temperature monitoring. All switch points can be programmed from the outside easy to read LED display with status indication Connecting flange as per DIN 24557 T2 4 programmable switching outputs ...
Process temperature: -25 °C - 70 °C
Process pressure: 10 bar
... The SIKA level switches are used for reliable monitoring of liquid levels. Used for: • dry-run protection • overflow protection • leakage monitoring The SIKA level switches are the ...
SIKA
... SKF Series Level Control Float Switches › As electrical parts are not n the water, safe and reliable › Operation distance adjustable with gravity part › Simple assembly › Limit switch contact block ...
Process temperature: -10 °C - 90 °C
... according to DIN43650, M3 - Electric connection according to IEC60947-5-2, M12 - Electric protection according to DIN40050, IP 65 - Medium consumption: <50 mA - Power supply: from 10 to 30 Volt - Interference emission ...
Process temperature: -30 °C - 60 °C
Process pressure: -0.5 bar - 10 bar
... rooftop of the angle arm. BACKGROUND Stepper motor technology has proven its worth in the space industry and long-term tests in the automotive industry since all functional parameters can be adjusted. Speed or tripping ...
MBA Instruments GmbH
the best suppliers