{{product.productLabel}} {{product.model}}
{{#if product.featureValues}}{{product.productPrice.formattedPrice}} {{#if product.productPrice.priceType === "PRICE_RANGE" }} - {{product.productPrice.formattedPriceMax}} {{/if}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{product.productLabel}} {{product.model}}
{{#if product.featureValues}}{{product.productPrice.formattedPrice}} {{#if product.productPrice.priceType === "PRICE_RANGE" }} - {{product.productPrice.formattedPriceMax}} {{/if}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Process temperature: -40 °C - 200 °C
... The capacitive level switch identifies the level of liquids and solids. It can also be used in pressurized tanks or pipes. Typically, the level switch ...
Process temperature: -52 °C - 240 °C
Process pressure: -1 bar - 47 bar
... b>Overview
The horizontal float
switch JUMO NESOS R40 LSH is designed for side mounting on tank walls to detect MIN and MAX
liquid limit
levels. It supports up to two switching contacts for redundant ...
Process temperature: -52 °C - 240 °C
Process pressure: -1 bar - 37 bar
... description
The JUMO NESOS R04 LS float
switch in curved version is designed to
switch alarms, pumps, signal lamps, valves and horns via a contact-protection relay. The device is suitable
for liquid ...
Process temperature: -196 °C - 350 °C
Process pressure: 0 bar - 40 bar
... potentialfree. Float switches are also available with multiple switch points. The switching functions always refer to a rising liquid level: Normally open, normally closed or change-over ...
WIKA Alexander Wiegand SE & Co. KG
Process temperature: -30 °C - 150 °C
... Applications: - Level measurement of liquids in machine building - Control and monitoring tasks for hydraulic power packs, compressors and cooling systems Special features - Maximum reliability thanks to high-quality ...
WIKA Alexander Wiegand SE & Co. KG
Process temperature: -269 °C - 400 °C
... using a separate model OSA-S switching amplifier Description The model OLS optoelectronic level switch is used for the detection of limit levels in liquids. This is widely independent ...
WIKA Alexander Wiegand SE & Co. KG
Process temperature: -50 °C - 200 °C
Process pressure: 0 bar - 64 bar
... The VEGACAP 62 is a point level sensor for use in all areas of industry. The partly insulated probe is suitablle for measurement of bulk solids and liquids. The proven mechanical construction offers high functional safety. Your ...
VEGA Grieshaber KG
Process temperature: -50 °C - 200 °C
Process pressure: 0 bar - 64 bar
... Application area For liquids and bulk solids, Sensor length up to 32 m The VEGACAP 65 is a point level sensor for use in all industries. The partly insulated probe is suitable for the measurement of bulk solids and ...
VEGA Grieshaber KG
Process temperature: -40 °C - 150 °C
Process pressure: -1 bar - 64 bar
... The VEGASWING 53 is used as a universal level switch in liquids with small dimensions. Independent of the mounting position, it detects reliably with millimetre accuracy the limit level. ...
VEGA Grieshaber KG
Process temperature: -40 °C - 150 °C
Process pressure: -1 bar - 40 bar
... VIBRATION LEVEL SWITCH - LIQUID FORK The compact and robust solution for safe level monitoring for all types of liquids. Versatile, extensive configuration options, ...
UWT GmbH
Process temperature: -40 °C - 125 °C
Process pressure: -1 bar - 25 bar
... THE CAPACITIVE LEVEL DETECTOR CAPANIVO® CN 7000 is used as a full/demand or empty detector as well as for leakage detection in any kind of liquids. Due to its compact design, the sensor is ideal for ...
UWT GmbH
Process temperature: -40 °C - 150 °C
Process pressure: -1 bar - 16 bar
... LEVEL DETECTION WITH VIBRATION FORK The Vibranivo® - vibrating fork for point level measurement, with its robust stainless steel extension and high sensitivity, is widely used in storage silos and process vessels. ...
UWT GmbH
Process temperature: -50 °C - 250 °C
Process pressure: -1 bar - 16 bar
... Vibration level switch for solid applications* Point level detection of powders and fine-grained bulk solids * Probe length: 220 mm / 8.7" * Density: <8 g/l / <0.49 lb/ft3 * -50…+250°C / -58…+482°F; ...
KROHNE Messtechnik GmbH
Process temperature: -196 °C - 450 °C
Process pressure: -1 bar - 160 bar
... OPTISWITCH 4000 is a vibration level switch for simple liquid applications. It is a universal and cost-effective device for level detection in small vessels. It detects low or high level ...
KROHNE Messtechnik GmbH
Process temperature: -40 °C - 115 °C
Process pressure: -1 bar - 100 bar
... capacitance level switch OPTISWITCH 6700 The OPTISWITCH 6700 is a capacitance level switch for hygienic and general industrial applications requiring IO-Link communication. ...
KROHNE Messtechnik GmbH
... Just by mounting the switch on a pipe, the surface of the liquid can be easily detected. Description The HPQ-T is designed specifically for liquid level detection by non-contact methods ...
Process temperature: -25 °C - 70 °C
Process pressure: -49,000 Pa - 490,000 Pa
... beam. This Fail-safe detection is available by using two different sensing methods for the upper and lower limits on the level of liquid in a tank. Description Unlike all known competitive models, the HPF-T032(E) ...
... provided at the tip of the fiber reduces malfunction due to liquid clinging. The lens built into the tip of the fiber ensures a large difference in light quantity between the conditions when liquid is present or absent ...
Process temperature: -40 °C - 150 °C
Process pressure: 0 bar - 64 bar
... Vibrating level switch for liquids For liquids (density: > 0.5 ... 2.5 g/cm³) Application area It detects the limit level reliably and with millimetre accuracy ...
VEGA TECHNIQUE
Process temperature: -40 °C - 150 °C
Process pressure: 0 bar - 64 bar
... Vibrating level switch for liquids For liquids (density: > 0.5 ... 2.5 g/cm³) – with tube extension Application area The position of the switching point can be up to 1 m away ...
VEGA TECHNIQUE
Process temperature: -50 °C - 250 °C
Process pressure: 0 bar - 64 bar
... Vibrating level switch for liquids For liquids (density: > 0.5 ... 2.5 g/cm³) – compact version Application area It detects the limit level reliably and with ...
VEGA TECHNIQUE
Process temperature: -50 °C - 120 °C
Process pressure: 140 bar
... 2 W Product accessories - Liq. level switch accessories Product description - Liquid Level Switch Product group - Switches and thermostats Product ...
DANFOSS Refrigeration & Air Conditioning
Process pressure: 0 bar - 1 bar
... Float switch combined with temperature contact Float switches are switching devices operated by a float moved by fluid. Two switching contacts with temperature contact Switching points: 220 mm /140 mm Output ...
Bosch Rexroth - Industrial Hydraulics
Process temperature: -40 °C - 150 °C
Process pressure: 25 bar
... Lidec liquid level switches are liquid level sensors for overfill protection that ensure safety as well as simpler, cost-effective maintenance. What Is It? Lidec ...
Process temperature: 0 °C - 100 °C
Process pressure: 0 bar - 10 bar
... also possible to detect non-conductive media. The level switch is particularly suitable for use with foaming media because the foam itself is not detected. The output of the level switch ...
KOBOLD INSTRUMENTATION
Process temperature: -50 °C - 150 °C
Process pressure: 0 bar - 64 bar
... The Type 8111 is a filling level switch for liquids, using a tuning fork as the sensor element. It is designed for industrial use in all areas of process technology and can be used in ...
Process temperature: -40 °C - 200 °C
Process pressure: -1 bar - 100 bar
... Reliable in diverse media Wide variety of process connections For hygienic and industrial applications With marine, WHG and cULus approval Optionally available with Ex certification ...
Baumer Group
... Series Mechanical Level Switches are the most rugged and durable liquid point- level detection products in the industrial marketplace today. ABB's LS Series Mechanical Level ...
ABB Measurement & Analytics
Process temperature: -5 °F - 150 °F
... secured micro switch. When the level switch changes position in the liquid, the hermetic micro switch is activated by a moving weight. Electrodes give an alarm or a ...
MJK
... range of point level switches. Different application conditions require dedicated working principles, specific process connections and wetted materials of excellent quality. GF Piping Systems point level switches ensure ...
GF Piping Systems
Process temperature: -20 °C - 50 °C
... reactor systems. Sludge blanket level measurement works by measuring the distance between the sludge blanket surface and the water level. Once the sludge has reached the required density, the accompanying ...
Process temperature: -20 °C - 205 °C
Process pressure: 0 bar - 138 bar
... the Series L6 Flotect® Level Switch is designed and built for years of trouble-free service in a wide variety of process liquid level applications. Operation is simple and dependable ...
Process temperature: 0 °C - 80 °C
Process pressure: 0 bar - 10.34 bar
... Electro-Optic Level Switches are low cost, compact, optical level sensors with built-in switching electronics. With no moving parts, these small units are ideal for a variety of point level sensing applications ...
GEMS SENSORS & CONTROLS
Process temperature: 0 °C - 300 °C
Process pressure: 25 bar
... Density of the liquid min. 0.7 kg/dm³ Operating differential 12 mm, fixed Housing material seawater resistant die cast aluminium Flange square 92 x 92 mm, 92 mm PCD Switch element Microswitch SPDT with ...
Trimod'Besta
Process temperature: 0 °C - 250 °C
Process pressure: 0 bar - 250 bar
... mechanism. Bellow material Perbunan Safety Integrity Level (SIL) SIL 1 (Type AA 01 051: SIL 2) Approvals ABS, BV, ClassNK, DNV-GL, LR, RINA, RMRS Bellow material Silicon Safety Integrity ...
Trimod'Besta
Process temperature: -40 °C - 110 °C
Process pressure: 0 bar - 10 bar
... Robust single level float switch, ideal for flat tanks and limited installation space. For use in oil and water. Opener / Closer SPST 50 VA/0.5A/250 VAC Switch function factory setting is NO (normally ...
Trimod'Besta
Process temperature: -25 °C - 70 °C
Process pressure: 16 bar
... Optical filling level monitor with resistant glass tip for the reliable monitoring of the maximum or minimum filling level of fluids Detects fluids with a very low DK values, such as oil Resistant to detergents, ...
EGE-Elektronik Spezial-Sensoren GmbH
Process temperature: -25 °C - 75 °C
... Ex Filling level monitor / filling level switch for the reliable monitoring of the maximum or minimum filling level of fluids Resistant materials: stainless steel and glass Detects ...
EGE-Elektronik Spezial-Sensoren GmbH
Process temperature: -25 °C - 75 °C
... Capacitive filling level monitor / filling level switch for the reliable monitoring of the maximum or minimum filling level of fluids or bulk materials With PTFE housing: For ...
EGE-Elektronik Spezial-Sensoren GmbH
... The O²-PID System is an optical safety device to prevent the overfilling of storage and bunker tanks when filled with petrol, diesel or fuel oil. In a petrol station, tank overfilling, improper hose connection and product mixing during fuel delivery ...
FAFNIR GmbH
Process temperature: -40 °C - 80 °C
Process pressure: 0 bar - 25 bar
... Our thermal limit switch, prevents the overfilling of tanks and process containers. It consists of a sensor (LS 300) installed inside the tank and a transducer (LS 500) with an output relays. For water-polluting liquids, ...
FAFNIR GmbH
Process temperature: 25 °C - 80 °C
Process pressure: 0 bar - 2 bar
... The ideal solution to overfill prevention of tanks for water polluting liquids. With its easy installation and the option of acoustic or optical sensors, the overfill prevention has proven its reliability ...
FAFNIR GmbH
Process temperature: -40 °F - 140 °F
Process pressure: 150 psi
... The Drexelbrook Dumpstar point level controls to help cut costs by increasing operating efficiency via a very precise control of the water dump on oil separators. Installing this level controller is ...
AMETEK Drexelbrook
Process temperature: -40 °C - 85 °C
Process pressure: 1,000 psi
... ultimate in level switch integrity and level sensing elements for a wide variety of temperatures, pressures, and materials. The Safety IntelliPoint is our BEST and most versatile ...
AMETEK Drexelbrook
Process temperature: -40 °F - 145 °F
Process pressure: 1,000 psi
... Z-Tron IV level switch is one of our most popular on/off level switches offering an effective, low-cost material level detection in a wide variety of applications. It is widely used as ...
AMETEK Drexelbrook
... Level switch Medium: oil Max. number of switching points Level: 3 Material pipe: brass Material float: PUR ...
EUGEN WOERNER GmbH & Co. KG
... Level switch Medium: Oil, Ester, Glycole Max. number of switching points Level: 2 Material pipe: Cu Material float: PUR/ stainless steel ...
EUGEN WOERNER GmbH & Co. KG
... Level switch Medium: Oil, Ester, Glycole Max. number of switching points Level: 1 Material pipe: Cu Material float: PUR / stainless steel ...
EUGEN WOERNER GmbH & Co. KG
Process temperature: 85 °C
Process pressure: 3.5 bar
... with the liquid level. When a preset level is reached the float tilts and opens/closes the integrated mechanical switch according to the selected mode (filling or draining). Used in pairs, ...
ATMI
Process temperature: 90 °C
Process pressure: 4 bar
... The AT 120 HR HY is a float level switch for automatic level control in aggressive or agitated liquids. Its HR HY press‑vulcanised biconical housing provides double waterproofing and ...
ATMI
Process temperature: 80 °C
... contact with the liquid. The electronic module (relay or controller) interprets this current as water presence and drives an output (relay contact). The AT-SONDE can be used for level detection or for ...
ATMI
Process temperature: -20 °C - 50 °C
... technologies. This capacitive overflow detector allowing unrivalled detection of water levels (thresholds) and overflows in the most difficult conditions. - Settings configuration via Bluetooth ...
Process temperature: -20 °C - 80 °C
Process pressure: 0 bar - 10 bar
... SAFE a) the level switch has structural separation of the electrical part from the tank; b) insensitive to dirty liquids and metal particles. VERSATILE a) it can have two types of fixing (flange ...
Fratelli Giacomello
Process temperature: -20 °C - 80 °C
Process pressure: 0 bar - 10 bar
... Pneumatic Rapid Level - Indication by means of magnetic-operation pneumatic valve - IP65 adjustable protection box with inlet and outlet quick couplings - Valve opening obtainable in presence or absence of liquid - ...
Fratelli Giacomello
Process temperature: -20 °C - 120 °C
Process pressure: 0 bar - 10 bar
... safety, the minimum or maximum level of liquids in tanks and hydraulic power packs containing mineral oils with viscosity not higher than 80°E; they are also suitable for gas oil and all other non-corrosive and inflammable ...
Fratelli Giacomello
... The Sonocontrol 15 by Sonotec Ultraschallsensorik Halle GmbH is a Non-intrusive ultrasonic level switch designed to detect whether a tube is filled with liquid or liquefied gas. It features its performance ...
Process temperature: -20 °C - 50 °C
... Auto-Set flush probe represents a low profile RF capacitance plug switch level monitor. The unit is specifically designed for used in tight fitting applications to detect levels of liquids, ...
Process temperature: -40 °C - 70 °C
... high-performance data logger for storage of measurement values. Water level measurement in water level stations with float shaft and in pipes from Ø 4 " Parameters: Water ...
Process temperature: -20 °C - 105 °C
... the inside of the tank. These devices are particularly suitable for detecting low levels of liquids in the bottom of tanks and containers, and for lower SG liquids. Typical applications include vending ...
Sensata Technologies
Process temperature: -10 °C - 85 °C
... The RSF166 Series float switch is designed to offer a number of switching options to meet a variety of system requirements. These are manufactured in PPS (Polyphenylene Sulphide), which is compatible with a wide range of liquids, ...
Sensata Technologies
Process temperature: -10 °C - 85 °C
... The RSF166P Series float switch is designed to offer a number of switching options to meet a variety of system requirements. These are manufactured in PPS (Polyphenylene Sulphide), which is compatible with a wide range of liquids, ...
Sensata Technologies
Process temperature: -25 °C - 70 °C
Process pressure: 0.2 MPa - 2.5 MPa
... float-type level switch for in-tank applications
Technical specifications
- Model:
APLISENS S.A.
Process temperature: -25 °C - 80 °C
Process pressure: 1.2 MPa
... Product type
- Magnetic level switch / Bilge level switch
Overview
- Designed for contaminated and dirty liquids in marine
APLISENS S.A.
Process temperature: -25 °C - 70 °C
Process pressure: 40 bar
... Level switches are designed for signaling limit levels or two-state control of liquid levels in open and closed pressure vessels, in explosive atmospheres too. The switches ...
APLISENS S.A.
Process temperature: -30 °C - 80 °C
... For limit level detection in conductive liquids as well as control jobs in connection with conductive rod and suspension electrodes -Narrow construction – width 22.5 mm -Adjustable sensitivity -Closed ...
NIVUS GmbH
Process temperature: -25 °C - 80 °C
... For limit level detection of conductive liquids as well as control of conductive liquids in Ex areas, for connection of conductive rod and suspension electrodes -Ex-ia version, Zone 0 -Optical ...
NIVUS GmbH
Process temperature: -20 °C - 90 °C
... displayed by the ER-107 and the source contact switches to alarm status. When the filling level of the container reaches the conductive pickup's rods a measurement current is able to flow through the conductive liquid. ...
NIVUS GmbH
Process temperature: 5 °C - 60 °C
... depicting precise liquid level. Simple uni-body construction with no moving parts. Factory-calibrated and maintenance-free High noise immunity to EMI and RFI. Quickly & easily mounted and removed. Introtek Point ...
Process temperature: -45 °C - 204 °C
Process pressure: 19 bar - 70 bar
... Total level (e.g., hydrocarbon liquid) Top of emulsion layer Bottom of emulsion layer (e.g., water level) Sediment Features 24 VDC interface detector with four (4) 4-20mA outputs ...
Magnetrol - AMETEK
Process temperature: -40 °C - 121 °C
Process pressure: 55, 103 bar
... ultrasonic level switches utilize ultrasonic contact technology for measuring level in clean liquid applications. These integrally mounted level switches offer either a 8-amp DPDT gold ...
Magnetrol - AMETEK
Process temperature: -40 °C - 70 °C
Process pressure: 138 bar
... self-test technology. Single Point ECHOTEL Model 961 offers the ultimate solution to reliable single-point liquid level measurement. This advanced switch uses pulsed signal technology for superior ...
Magnetrol - AMETEK
Process temperature: 0 °C - 70 °C
... The WBF33A30-0 Series, manufactured by Comus Group®, which has a 240 Vac voltage switch that can hold a 100 Watts maximum 10 Watts in a minute and has a solid state output resistance. Furthermore, it has a 30° degrees angle differential ...
The Comus Group
Process temperature: -10 °C - 128 °C
... The VFS30 is a reversible float switch manufactured by Comus. It features a stainless steel SUS304 construction, and dimensions of 60.0x28.0mm. The switch has a voltage rating of 200V AC to 240V AC. It has a maximum ...
The Comus Group
Process temperature: -10 °C - 120 °C
... The VFS75 is a stainless steel float level manufactured by Comus. This device is made of SUS303 stainless steel and features a contact form which is normally closed. It runs on a maximum switching voltage of 250V AC. Its maximum switching ...
The Comus Group
Process temperature: -40 °C - 177 °C
Process pressure: 240 bar
... FLT93B BASIC level switch is available with all of the below listed standard features for a very attractive price and with quick delivery as soon as 2 business days ARO. Applications Interface and sump level ...
FCI Fluid Components International
Protects sensors from highly corrosive processes in which acids and caustic chemicals condense on the sensor.
FCI Fluid Components International
Process temperature: -73 °C - 454 °C
Process pressure: 240 bar
... requirements. Liquid Point Level Detection/Alarm Interface and sump level detection Interface/sump level detection in separation vessels Agitation detection Interface/ level ...
FCI Fluid Components International
Process temperature: -20 °C - 350 °C
Process pressure: 4.5, 3 MPa
... LXT207 float-operated with test device level switches are suitable for controlling liquid level at horizontal mounting. The float equipped with an extended arm moves a couple magnetic mechanism to actuate ...
Golden Mountain Enterprise
... TLS Series are assembled with a thermal dispersion sensor. It designed to provide a switch function for controller or alarm when the sensor is immersed into process liquid. Technical Data Wetted Parts Material: 316 stainless ...
Golden Mountain Enterprise
Process temperature: max 200.0 °C
... EDW602-Weather Proof Type EDX602-Explosion Proof Type The NEW-FLOW float level switches are made to applications such as pump control. waste water level and open tank. They are designed for high corrosive ...
Golden Mountain Enterprise
Process temperature: -40 °C - 150 °C
Process pressure: 40, 25 bar
... reverts to indicate material absence. SCX Tuning Fork Level Switch Application Scope It is applicable to the max. and min. level detection of the tanks or tubes filled with various solid/ liquid ...
FineTek Co., Ltd.
Process temperature: -40 °C - 85 °C
Process pressure: 1 bar - 40 bar
... prevent from severe bridging. auxiliary rod is not included in the order). Principle SIS Sanitary Intelligent Level Switch, Lquid Level Switch (Food Grade) Working principle ...
FineTek Co., Ltd.
Process temperature: -10 °C - 100 °C
Process pressure: 60, 65 bar
... light is refracted into the liquid and away from the SD series level switch receiving component thus how liquid presence and absence is determined. The SD series output will be activated ...
FineTek Co., Ltd.
Process temperature: 0 °C - 50 °C
... is a float switch that turns up and down using the weight as the fulcrum. It is designed to be the smallest possible size. It is available in two types; contact "a" (normally-open contact) and contact "b" (normally-close contact). Oil ...
Process temperature: 0 °C - 50 °C
... is a float switch that turns up and down using the weight as the fulcrum. It can detect cut-in and cutout water levels with single float. The "Snap on-off" action ensures stable operations in clean water, ...
Process temperature: 0 °C - 50 °C
... is a heavy-duty type float switch with a shock absorber. Having equipped with a high grade micro switch, the MC-2 assures trouble-free operation in the liquid containing much suspended solids and floating ...
the best suppliers