Process temperature: -20 °C - 180 °C
Process pressure: -1 bar - 25 bar
... and Ground terminal. Our FRFS series RF level switch is widely used in the alarm and control of liquid, slurry, material level and two liquid interface levels. ...
Feejoy Technology
Process temperature: -40 °C - 250 °C
Process pressure: -0.1 MPa - 4 MPa
... 26G radar level gauge is suitable for liquid, paste, granule and block material level and non-contact measurement, suitable for changes in temperature,pressure big; there is an inert gas and volatile.The ...
Xian Kacise Optronics Co., Ltd.
Process temperature: -40 °C - 230 °C
Process pressure: -1 bar - 64 bar
... is used to drive and feed back the tuning fork rod, so that the tuning fork rod can produce resonance. When the material level contacts the tunng fork rod, the frequency signal feed back by the turning fork rod will be converted into ...
Process temperature: 0 °C - 80 °C
Process pressure: 0 bar - 1 bar
... requirements and facilitates routine maintenance Flange dimensions as per DIN 24557 T2 Air breather with integrated liquid level and temperature monitoring Filling port with quick coupling Sampling port with quick ...
Bühler Technologies
Process temperature: -20 °C - 80 °C
Process pressure: 10 bar
... Float switch for a secure, selective level measurement Through their design and the selection of materials, the float switches are specially developed for use in shipbuilding or in rough environments. Low ...
WEKA
Process temperature: 5 °C - 60 °C
... Introtek Water Level Detector Sensor: Introtek’s patented pulse-type ultrasonic technology provides highly reliable, non-invasive liquid level or air detection capabilities ...
Introtek
Process temperature: -20 °C - 500 °C
Process pressure: 25 bar
... filter value, high and low alarm switch, more advanced, smarter and more user-friendly operation interface greatly broadens the scope of use and experience of the product. Application Area Wastewater measurement; Open water ...
Process temperature: -40 °F - 302 °F
Process pressure: 0 bar - 102.04 bar
... Capacitance level switches are designed for point level alarm or control of conductive and non-conductive liquids, granular materials, foams, pastes, slurries and interface applications. They may be used ...
Process temperature: -25 °C - 80 °C
Process pressure: 10 bar
... The SIKA level switches are used for reliable monitoring of liquid levels. Used for: • dry-run protection • overflow protection • leakage monitoring The SIKA level ...
SIKA
... signals 0…10V, 0…20mA or 4…20mA, is suitable for monitoring of supply and control voltages, e.g. in the water and waste water industry for fill level supervision and pump control (e.g. ...
ACS Control-System GmbH
... Float type level switch FB-5000 is a highly compact and durable float switch which is installed at a tank side through a nozzle. Made out of 316 SS, it has high corrosion resistance capability and ...
... situations Ideal for industrial applications such as pump control and high or low alarm duty on tanks and pressure vessels Trouble free operation in corrosive applications Designed for long life and versatile applications in liquid ...
Process temperature: -40 °F - 180 °F
Process pressure: 0 psi - 160 psi
... Whitman Controls L40 / L45 Series Vertical Mount Brass / Buna Liquid Level Switches are most commonly seen in OEM applications and other industrial inputs. The brass stem and buna float makes the switch ...
Whitman Controls Corporation
... Product overview
The pneumatic
level
switch signals when the tank's maximum
level is reached using only compressed air. Patented technology by DIMACO. Parts in contact with the tank contents ...
Process temperature: 0 °C - 110 °C
... Vertical mounting for water, fuel and oil • Type LM70 • 1 to 4 contacts (1 common for 4 contacts), • Power maxi : 10 W • Current maxi. : 0,5 A • Voltage maxi : 200 Vcc • Waterproof connector for 1 or 2 contacts, cable output for 3 to 4 contacts. • ...
... SKF Series Level Control Float Switches › As electrical parts are not n the water, safe and reliable › Operation distance adjustable with gravity part › Simple assembly › Limit switch contact block ...
EMAS
Process temperature: -10 °C - 90 °C
... Maximum inclination: 15° Max viscosity of the fluid: 150 cSt Mechanical life: 106 cycles at 20°C Body: in anodized aluminium with wetted part in stainless steel 316L (rod) and spancil pom (float) Installation: must be least at 50mm away from ferrous ...
Fox S.r.l.
Process pressure: 16 bar
... integration. Dust and water ingress is reliably prevented by IP 67 protection. Feel free to contact us if you need a customization that is not listed in this datasheet. Features Microwave level switch ...
Process temperature: -40 °C - 100 °C
Process pressure: 7 bar - 25 bar
... The electro-optical level sensor is used to monitor the level of liquids. The model LLS.ELS1150 is an enhanced electro-optical level switch from IMS sensors. The series ...
Intellisense Microelectronics
Process temperature: -10 °C - 50 °C
... Tempatron FLDT liquid level detector is designed for differential or single point detection of liquid levels. The output relay will energise when the liquid ...
Tempatron
Process temperature: -52 °C - 240 °C
... The float switch is typically used to switch alarms, pumps, signal lamps, valves, and horns via a contact protection relay. When connected to intrinsically safe electrical circuits, the intrinsically safe [Ex i] version ...
Process temperature: 0 °C - 50 °C
Process pressure: 0 Pa - 49,000 Pa
... Detects high and low limit level of fluid using a single tube. Not influenced by adhering materials. The use of PFA tube enables measurement of corrosive liquids. Built-in semi-conductor ...
... The Plastic Float Switches have the following Features: - M 16x2 and 1/2" NPT - 1 NO, NC or change over - Temperature range upto +70°C - max. 3bar - IP65 ...
Jacob GmbH
Process temperature: -10 °C - 80 °C
Process pressure: 10 bar
... resistance - 1010 Ohm Switch type - SPST – SPDT Max. fluid viscosity - 150 cSt Fluid specific gravity - ≥ 0.7 kg/dm³ Electrical connection - DIN43650 – PG09 Flange material - Anodized aluminium Stem ...
ELETTROTEC s.r.l.
Process temperature: 0 °C - 150 °C
... mounted floating ball liquid level switch is suitable for liquid level control of various open or pressured vessels in industrial production process. ...
the best suppliers