Flow: 0.1 l/min - 3.2 l/min
Pressure: 0 bar - 250 bar
Precision metering high pressure gear pump. Made in stainless steel. For products with medium to high viscosity. Suited for resins, glues, greases, ...
Pressure: 32 bar - 136 bar
Fast and service friendly maintenance With the WIWA 4-ball pumps, you can convey even the most difficult materials. Fields Of Application Paint circulation systems Feed pump Feed ...
Flow: 0.2, 0.4 l/min
Pressure: 40 MPa
Power: 0.75 kW
... development of new technologies and new products. SOATOER Double Line Electric Lubrication Pump Fuel tank volume 30-60-100KG Applicable grease≤NLGI2 With high and low liquid level detection ...
Flow: 0.00013 m³/min
Pressure: 250 bar
Power: 0.55 kW
... three-phase motor, providing a wealth of flow and pressure characteristics that can even be used in medium to large systems. In particular, when equipped with a two-line reversing valve, ...
Flow: 120 l/min - 360 l/min
Pressure: 241 bar
Lubrication pumps for heavy duty mining trucks, hydraulically driven, available for single line lubricators, progressive systems, dual line systems, etc. HANDY-H is a hydraulically driven high ...
Flow: 60 l/min - 570 l/min
Pressure: 8 bar
Head: 0 m - 80 m
... showed that a large amount of energy required in a pump was to overcome the resistance in the pump. Another major issue was the mid-port scenario when Air pumps were ...
... to the unit. The pump stations are based on the standard Tapflo pumps from machined polyethylene (PE). An external pressure booster doubles the delivery pressure. ...
Flow: 34 l/h - 336 l/h
Pressure: 238 bar
Weight: 15 kg - 38.2 kg
... catalyst in a reactor for a refinery or high volume batch dosage treatments offshore such as biocides for water and fuel treatments. The “W” Series pump can deliver up to 90 gph (336 liters per hour at ...
Pressure: 10 bar
Fluid temperature: 60 °C
Weight: 600, 720 g
... Modern and compact oil burners pump, designed to pump fuel from the tank to the burner nozzle, at the required pressure. The A – AD type pump is made ...
Flow: 3,700 us gal/h - 3,800 us gal/h
... Centrifugal Pumps End Suction Centrifugal Pump The Xylem Rule General Pupose Pump is designed 1-1/2" (38mm) inlet and 1-1/2" (38mm) discharge outlet. The Xylem Rule General Purpose Pump ...
Flow: 0 l/min - 0.04 l/min
Pressure: 0 bar - 400 bar
Power: 120 W
... actual flow rate is controlled and monitored. A built-in pressure sensor can be used for pressure monitoring. Pressure control with this built-in sensor is available ...
Flow: 450 m³/h
Pressure: 63 bar
Head: 630 m
... that the pump closely match the required duty conditions. Applications: Pumps of the SIHImulti range meet the specific requirements of many applications, such as waterworks and water supply, boiler ...
Flowserve SIHI Pumps
Flow: 250 m³/h
Pressure: 100 bar
Head: 1,000 m
... SIHImulti MSC range of horizontal, ring-section multi-stage pumps have been designed for long-term reliability when pumping high pressure liquids. The design features within this range ...
Flowserve SIHI Pumps
Flow: 250 m³/h
Pressure: 160 bar
Head: 1,600 m
SIHImulti pumps of the series MSH are horizontal multistage centrifugal pumps of ring-section design, which meet the technical requirements of ISO 5199 / EN 25199. The type MSH is developed for the high ...
Flowserve SIHI Pumps
Pressure: 40 bar
Fluid temperature: -20 °C - 180 °C
Screw pumps for industrial use series SSP (low pressure) and HSSP (high pressure) Service For all pumps Universal Hydraulik guarantee maintenance and repair.
The propellant pump is especially suitable for bringing liquified propellants with a low boiling point to a high pressure. The pump guarantees a constant propellant pressure ...
Flow: 48.1 l/min - 71 l/min
Pressure: 0 bar - 20 bar
Power: 0.4 kW - 2.5 kW
The 3-diaphragms pump ZETA 70 produces a flow of 71 l/min and operates at a maximum pressure of 20 bar. It is available with single or double splined/cylindrical shaft. Semi-Hydraulic ...
UDOR S.p.A.
Flow: 0 l/h - 840 l/h
Pressure: 0.6, 0.55 MPa
Power: 10 W - 150 W
... manufactured of SUS316, PTFE, PPS and PEEK. These material combinations offer extremely high levels of corrosion resistance. Thus the transfer of many different agressive chemical solutions is assured. High ...
IWAKI Europe GmbH
Flow: 0 l/h - 5.4 l/h
Pressure: 0.2 MPa
Fluid temperature: 0 °C - 60 °C
High precision micro dosing All main parts (piston & cylinder) are made of finest ceramic produced with high precision and micro tolerances. Therefore a repeatability ...
IWAKI Europe GmbH
Flow: 14, 16, 17, 20 l/min
Pressure: 0 Pa - 350,000 Pa
Power: 180 W - 220 W
... turbine pumps With the MDT series mag. drive turbine pumps made of plastic are available. Discharge pressures up to 0.35 MPa are attainable. Thanks to the seal less construction, leackage ...
IWAKI Europe GmbH
Flow: 5.5 l/min - 74 l/min
Pressure: 30, 35, 40 bar
Power: 10, 7.5, 12.5, 6 kW
The MAI®440GE grout pump for all your industrial injection systems needs The MAI®440GE represents a new era in grouting equipment technology. This multi-purpose, high-performance mixing pump ...
Flow: 4 m³/h - 20 m³/h
Pressure: 7, 15 bar
... Double-Diaphragm (AODD) Pumps have been specially designed to provide a safe operation in high-pressure applications up to 15 bar (218 psig). A typical application of these pumps is filter ...
Flow: 1, 1.5 l/min
Pressure: 100 bar
... Inside, our high-pressure pump boasts materials like VITON seals and metallic components in AISI 316L STEEL. But that's not all. Our high-pressure pumps have been designed ...
MIXTRON S.R.L.
Flow: 2, 2.2 l/min
Pressure: 100 bar
... Inside, our high-pressure pump boasts materials like VITON seals and metallic components in AISI 316L STEEL. But that's not all. Our high-pressure pumps have been designed ...
MIXTRON S.R.L.
Flow: 4, 5 l/min
... Inside, our high-pressure pump boasts materials like VITON seals and metallic components in AISI 316L STEEL. But that's not all. Our high-pressure pumps have been designed ...
MIXTRON S.R.L.
Flow: 0 l/min - 650 l/min
Pressure: 0 bar - 100 bar
Fluid temperature: 0 °C - 60 °C
High pressure pumps High pressure spindle pumps. Solution for deep boreholes and the high pressure ...
Flow: 366.5 m³/h
Pressure: 1,100 bar
Fluid temperature: -40 °C - 200 °C
... RDP range is a series of Reciprocating Plunger Pumps in a variety of sizes in Triplex and Quintuplex formats and designed in accordance with the latest edition of API 674 and ISO 13710 for high pressure ...
RUHRPUMPEN
Flow: 50 m³/h - 3,000 m³/h
Pressure: 420 bar
Head: 200 m - 3,000 m
The SM pump model is a heavy-duty, horizontal, axial split casing, volute type, multi stage, centrifugal pump according to the API 610 latest edition (BB3 type). Designed to be robust and reliable with ...
RUHRPUMPEN
Flow: 900 m³/h
Pressure: 416 bar
Head: 4,000 m
... demanding high-pressure and high-temperature applications across industries. Overview Ruhrpumpen's GP pump has been engineered to be the most reliable and efficient pumping solution ...
RUHRPUMPEN
Flow: 0.21 m³/h - 67.69 m³/h
Pressure: 39 bar - 1,146 bar
Power: 2.2 kW - 110 kW
3C Triplex Pumps Series Process pumps for high-pressure duties A flexible, robust and reliable solution to pumping high temperature, abrasive and viscous liquids in ...
Flow: 98 us gal/min
Pressure: 0 psi - 57 psi
WH15 (WH15XK1C1 ) FEATURES High pressure 1.5" centrifugal pump Easy starting Honda OHV commercial engine 115 gal./min. capacity 55 psi max. Cast iron volute and impeller
Flow: 119 us gal/min
Pressure: 0 psi - 64 psi
WH20 (WH20XK1AC1 ) FEATURES High pressure 2" pump Easy starting Honda OHV commercial engine 134 gal./min capacity 61 psi max. Cast iron volute and impeller MSRP
Flow: 76 l/min
Pressure: 40 bar
Power: 7.3 ch
Semi-hydraulic three-diaphragm pump, for use on sprayers for high pressure pesticide spraying in orchards and vineyards. Parts in contact with pumped liquids in anodized aluminium, and ...
Annovi Reverberi
Pressure: 40 bar
Water boosters for high pressure (> 40 bar) are available in many different sizes and forms. Dosanova can offer you a range of standard machines (type KS) or can offer you a custom built system based ...
Flow: 1 m³/h - 25 m³/h
Head: 9 m - 120 m
Power: 0.75 kW - 7.5 kW
... stainless steel (with adaptation of sealing materials on request). A universal pump for civil and industrial use, for pressureboosting systems, fire-extinguishing systems, high-pressure washing plants, ...
Flow: 0.6 m³/h - 60 m³/h
Head: 3 m - 275 m
Power: 0.55 kW - 22 kW
... matter (with adaptation of sealing materials on request). A universal pump for civil and industrial use, for pressure-boosting systems, fire-extinguishing systems, high-pressure washing ...
Flow: 0 m³/h - 80 m³/h
Pressure: 0 bar - 28 bar
The Fristam Centrifugal pumps FM enable effortless pumping at high pressures. They are designed to suit higher pressure loads. Technical briefs: The pumps ...
Flow: 0 us gal/min - 44,000 us gal/min
Pressure: 0 bar - 400 bar
Head: 0'00" ft - 1800'00"
... of Wet Stator Motor Pumps (BCP / BWCP) Vertical pump with an integrated wet wound motor. The pump and motor are designed for the same internal pressure, so there is ...
Flow: 600 m³/h
Pressure: 6,000 psi
Head: 160 m
High Pressure, High Temperature Pump A canned motor pump with a high-temperature and high-pressure ...
Please specify:
Help us improve:
remaining