Lincoln self-priming pumps

Stainless steel low-speed rotary pumps with flexible impeller; particularly suitable for transfer of delicate, fragile and viscous fluids, also with solid parts in suspension. Our pumps are widely used ...

Flow: 0 m³/h - 3,500 m³/h
Head: 0 m - 105 m

The Osna SKT is a non-self priming centrifugal pump that is suitable in applications such as clean water, seawater, brines and alkaline liquids in water supply, dust extracting and spray-coating ...

Flow: 28 l/min - 148 l/min
Head: 15 m - 17 m

The best solution for suction and transfer of liquids, thanks to the strong self-priming capacity and the ability to run even with discontinuous presence of the liquid in the suction. The ECC series, ...

Flow: 3,000 m³/h

The EN 733 MU Series of End-Suction Centrifugal Pump, manufactured by Pompe Garbarino S.p.A., is specifically designed for fresh and sea water, condensate, oils, chemical and petrochemical products. It is mainly used ...

Pressure: 2,500,000 Pa
Power: 0.55 W - 5.5 W

... cycloid rotor oil pump brief introduction: The BB-B series cycloidal rotor oil pump is a positive displacement internal gear pump. This type pump has simple construction, ...

Flow: 160 m³/h - 306 m³/h
Pressure: 2 Pa
Power: 5.5, 7.5 kW

... Use built-in forced fed oil pump to ensure long-term continuous operation of the pump under normal pressure. ·Adopt air-cooled, oil-cooled, water-cooled and other cooling methods to ensure a good cooling ...

Flow: 18.3 l/min - 1,200 l/min
Pressure: 300,000 Pa - 1,450,000 Pa
Power: 1,500 W - 22,000 W

... built in.SS304 for option. Hot Tags: Kcb Gear Pump, China Kcb Gear Pump, Kcb Gear Pump factory, Kcb Gear Pump manufacturers, Kcb Gear Pump suppliers, ...

Flow: 162 m³/h - 360 m³/h
Head: 12 m - 56 m
Power: 0 kW - 120 kW

... The features of this kind of slurry pump in which the frame plates have removable wear-resistant metal liners. The impellers are built of wear-resistant metal. The frame plate liner and impeller for EHM slurry pump ...

Flow: 15 us gal/min

... per minute. Features: Self-priming pump with overload protection 30-minute duty cycle Unique, multi-piece telescoping pick-up tube for wide range of tank depths 13-foot, commercial-grade, ...

Pressure: 0 bar - 150 bar

Character features of ABNOX Hand Push Pump: Suitable for lubricants (Grease) Light-weight, handy and optimal for simple applications Enables even under extreme backpressure, a variable lubrication ...

Flow: 85 l/min
Pressure: 0 bar - 2.4 bar
Power: 480 W - 768 W

Features 12V DC or 24V DC electric pumps consisting of a solid and robust permanent magnet motor which can ensure high reliability even when used at low temperatures. Self-priming vane pump ...

... is a peripheral granulated impurity. This device is made up of brass and is designed with a self-priming electric pump design. The self-priming electric pump ...

Flow: 1,000 l/min
Pressure: 17, 10 bar
Fluid temperature: -15 °C - 72 °C

... unparalleled performance in the segment of fire pumps developed through research and development studies, where competition is at the highest level with its modern lines. Product Features Low pressure pump Compatible ...

Flow: 0 m³/h - 42 m³/h
Head: 0 m - 42 m
Power: 4, 3 kW

Multistage high pressure centrifugal pumps type ZHB are horizontally mounted pumps. They are characterized by a minimum space requirement. Optionally, this series can be equipped with two or three pressure ...

Flow: 40 l/min - 86 l/min
Head: 10 m - 30 m
Power: 370 W - 1,500 W

... changing any setting. Working principle & Construction BESM pump is blades pump which construction between water ring pump and peripheral pump. So it can get better ...

Flow: 45 m³/h - 320 m³/h
Head: 25 m - 35 m
Power: 11 kW - 75 kW

... be used as feeding pump for desander, desilter, or used as mixing pump for Jet Mud Mixer. Also it can be used as trip pump, and supercharging pump for rig mud pump. ...

Flow: 0 l/h - 0.06 l/h

... to 1500 mL/hr (60 mL syringe) Pumps continuously until you stop the pump Infusion rate can be changed while pumping Syringe purge mode Power failure mode allows pump ...

Flow: 0 l/min - 12 l/min
Head: 0 m - 50 m
Power: 0.12 kW

... Temperature control in laboratory applications Advantages Suitable for the delivery of gas shares High pressures with compact design

Flow: 0 l/min - 0.032 l/min
Pressure: 6.9 bar
Fluid temperature: 60 °C

The GPD-Q0SSY Low Speed Pneumatic pump is an ideal power alternative when an electrical hook up is not readily available. FEATURES Provides a compact, variable speed, air powered drive Stroke rate is easily varied ...

Flow: 0 l/min - 1 l/min
Power: 1.8 W
Length: 48 mm

Oil Vacuum Pump│DC Mini Air Pump│DC-V1 Feature: Micro Vacuum Pump, Low Power Consumption,Low Leakage Application: Medical ...

Flow: 3.8 m³/h
Head: 0 m - 30 m
Power: 1 ch

The SJP Pump is a self-priming, single-stage centrifugal pump with axial suction port and radial discharge port, G1 or Rp1. The pump has a built-in ejector with guide ...

Viscosity: 1 - 500 cp Infusion rate: 5.8 x 10-11 - 121.5 mL/min Input: User defined High visibility backlit LCD Easy to use

Flow: 40, 43 l/min

Displacement, self-priming, rotary electric vane pumps for the transfer of diesel fuel equipped with by-pass valve. Powerful, dependable and economical, they are available with 12 ...

Flow: 0 m³/h - 700 m³/h
Pressure: 0 bar - 700 bar
Power: 600 kW

... conservatively sized crankmechanism. In the triplex pumps the crankshaft is supported by two roller bearings while in the case of the quintuplex or septuplex pumps intermediate bearings are provided. TITANO ...

Flow: 0.6, 1 l/min
Pressure: 0.06 MPa
Head: 12 m

... Low noise 4. Maintenance-free 5.small size 6. Self-priming 7. Dry loaded 8.Oil-free 9. No leaking 10 .high efficiency 11. Suitable for liquid and liquid/gas 12. Brushless motor Material: Pump ...