Lutz feed pumps

Flow: 3 m³/h - 1,000 m³/h
Pressure: 27.5 MPa
Head: 2,450 m

... petrochemical, coal chemical, water injection, pipeline, boiler feed water, etc. Refinery, oil and natural gas, petrochemical coal chemical industry, water injection, pipeline, boiler feed water, etc.

Flow: 7 m³/h - 730 m³/h
Pressure: 35 MPa
Fluid temperature: 80 °C - 450 °C

... chemical process pump series horizontal multi-stage centrifugal pump, horizontal center line support, horizontal multi-stage centrifugal pump with double shell, section and impeller. ...

Flow: 7 m³/h - 36 m³/h
Head: 5 m - 38 m
Power: 0 kW - 15 kW

The slurry pump is a type of centrifugal pump, designed for pumping liquid containing solid particles in mining, metallurgy,coal washing ,sewage water treatment,power plant,dredging.and chemical and petroleum industries ...

Flow: 44 l/min - 80 l/min
Pressure: 5.5 bar
Head: 40, 50 m

The PFT AV 1000 is a radially priming pressure booster pump. The drive is protected by a casing with a convenient handle. Water pressure booster pump PFT AV 3000 The PFT efficient water pump ...

Flow: 3 m³/h - 1,680 m³/h
Head: 4 m - 152 m
Power: 0.37 kW - 350 kW

• The pump shall be designed for clear, clean liquids which are non-aggressive to the wetted parts and non-explosive, without any solids or fibers • Water supply • Pressure boosting for high rise buildings, hotels ...

... setting of extremely small pressures. The technical data are based on an air inlet pressure of 8 bar. The pumps of course also function perfectly at low pressures. Krautzberger diaphragm pumps ...

Flow: 0 m³/h - 200 m³/h
Pressure: 24 bar
Fluid temperature: 100 °C

... fitting, allows an "MC" pump to be used in the applications more characteristic of "MA" pumps.

Flow: 2 m³/h - 100 m³/h
Power: 1.1 kW - 55 kW
Fluid temperature: -15 °C - 120 °C

... degree. QDL light multistage centrifugal pump Typical application situations 1. Municipal water supply and pressurization 2. Water supply for industrial circulating system and processing system 3. Boiler feed ...

Flow: 0 m³/h - 115 m³/h
Pressure: 32, 26, 25 bar
Head: 3.7 m - 326.3 m

Franklin Electric Vertical multistage pumps are the silent partner of your daily life. The pumps are available in different metallurgies (Cast Iron, 304SS, 316SS) and in different head and flow rates. Robustness ...

Flow: 4 m³/h - 96.7 m³/h
Pressure: 0.6, 1, 0.8 MPa
Power: 1.03 kW - 45 kW

... temperature. It ma be used as a common delivery pump, and a pressure supply pump in hydraulic drive device. The maximum working temperature is equal to or lower than 350℃. LQ3G series three spindle ...

Pressure: 0 bar - 27.6 bar
Power: 5.5 kW
Fluid temperature: -32 °C - 107 °C

... low or high flow rate with a high differential pressure, by underground and aboveground tank application , LWB-150 pump is an idea pump for two dual hose LPG dispensers. Continuous duty design. Serviceability ...

Flow: 0 us gal/min - 18,500 us gal/min
Pressure: 0 psi - 1,450 psi
Head: 0'00" ft - 720'00"

... reliability Pump casing design up to 100 bar Oil or grease lubricated bearings Cartridge mechanical seal, seal plan as per API Vertical installation optional available Design in accordance with API 610 if specified Technical ...

Flow: 0.0118 us gal/min - 0.1042 us gal/min
Fluid temperature: -40 °C - 79 °C

Chemical Metering Pump QED chemical metering pumps are suitable for dispensing chemicals for a variety of anti-scaling and anti-foaming applications. These pumps provide precise and ...

Flow: 0 m³/h - 110 m³/h
Head: 0 m - 70 m

Application Fitter press feeding. Dyes & Intermediates, Slurry transfer Cake transfer, ETP Plant. Sugar & Food Industries

Flow: 50, 60, 130 m³/h

... the pump to avoid axial load on engine shaft. Casing and cover with removable aluminium-bronze wear rings. Nozzles: suction ND 80/UNI 810, delivery ND 70/UNI 810 with valve. External high vacuum pump, ...

Pressure: 150 bar

The Lubrication Pump AXSP-S with pressure ratio from 25:1 is ideal applicable as feeding pump for ABNOX metering valves or as filling system. ABNOX Air-operated Grease Pump ...

The Riva-press, or the feed water centrifugal booster pump, are conventional automatic booster-sets that can come with a 24-L pressure tank and also includes a natural rubber diaphragm, ...

Flow: 0 m³/h - 10 m³/h
Head: 0 m - 100 m
Power: 3, 4 kW

... installations and is ideally suited for use as a feed pump for filter systems, for pumping coolants and in cooling/temperature systems within the machining industry. Due to a wide variety of materials, ...

Flow: 0 l/min - 100 l/min
Pressure: 10 bar
Head: 4 m - 52 m

... applications, irrigation, industry, etc. the pump body is made of stainless steel, so that they are of beautiful design. at the same time, they have the advantage of low noise, easy operation and reliable performance. Pumps ...

Flow: 10 m³/h - 90 m³/h
Pressure: 300,000 Pa
Power: 4 kW - 22 kW

GNG Series Centrifuge feed pump is a positive displacement pump, also called screw pump. The GNG positive displacement pump is an ideal pump ...

Flow: 170 m³/h
Head: 0 m - 322 m
Power: 0.5 ch - 100 ch

... a more compact pump design and pipe-work. SHAKTI SCR pumps are available in various sizes and different number of stages to provide required flow and pressure for various applications ...

Flow: 39, 293, 41 m³/h
Pressure: 16, 130, 21, 45, 18 bar

... steam driven pumps used for boiler feed service, low NPSHA pump-out service and for other process applications in Petrochemical Plants and in Refineries. All Peroni steam driven pumps ...

Flow: 4 m³/h
Pressure: 16, 25, 10 bar
Head: 13 m - 49 m

... Optimization of energy consumption in parallel (booster) pump systems. ● Prevention of pump cavitation and dry running. ● Monitoring of energy consumption. ● Monitoring and protection of the pump ...

The screw pump by Kosun is used to feed drilling fluids to decanter centrifuge since drilling fluids is pushed to proceed along axial direction evenly. Characteristics of the screw pump ...