Lutz industrial pumps

Flow: 0 l/min - 15.1 l/min
Pressure: 35 psi - 60,000 psi
Power: 37 kW

... alternately, which makes the machine can run 24h*7d. It is because if one of these two intensifiers broken down, the machine can use the other intensifiers quickly without any wasting time on waiting ...

Flow: 0 l/min - 15 l/min
Pressure: 35 psi - 60,000 psi
Power: 37 kW

... waterjet life. APW A16 intensifier pump is a miracle and it realizes the dream of every waterjet users whoever used, maintained or researched waterjet. APW waterjet integrated SIEMENS motor, imports REXROTH hydraulic ...

Flow: 0 l/min - 15.1 l/min
Pressure: 35 psi - 60,000 psi
Power: 75 kW

A16*2 Pump Performance APW waterjet A16*2 pump is the New Generation of waterjet pumps, which is powered by high-pressure waterjet dual-intensifiers. There are 2 intensifiers in this ...

Flow: 0.02 us gal/h - 79.2 us gal/h
Pressure: 85 psi - 247 psi
Power: 62, 19, 110, 17 W

... mechanically-driven diaphragm pump to achieve a repeatability of ±1%. 70% Energy Savings Helical gears and return spring reduce power consumption by up to 70% compared to conventional mechanical diaphragm ...

Flow: 0.3 us gal/h - 3.2 us gal/h
Pressure: 0.15 bar - 1.2 bar
Power: 15 W

... Series have both digital input and Stop/Start inputs built into the pump, enabling either proportional or On/Off control. • IP65 Equivalent Protection A robust housing protects the pump from normal ...

Flow: 0.6 us gal/min - 6.7 us gal/min
Pressure: 150, 290, 73 psi
Fluid temperature: -10 °C - 60 °C

... the EWN-Y Pump: • The EWN-Y Series pump combined with EFS flow sensor provides accurate real-time control and display of the dosing rate. • Set point control allows the desired flow rate to ...

Flow: 140 l/min
Head: 14 m
Power: 0.55 kW

... applications) negative pressure tight for vacuum systems no metal parts are in contact with the medium easy to maintain (wear parts can be changed swiftly) universally applicable, quiet and compact The ...

Flow: 200 l/min
Head: 27 m
Power: 0.25 kW - 2.2 kW

The S Pump Series has a special pump housing with a collection container that serves as a liquid reservoir. After filling the liquid container, the pump creates a strong negative pressure ...

Flow: 0 m³/h - 3,500 m³/h
Pressure: 0 bar - 6 bar
Head: 33 m

... volute-casing pumps can be used where the requirement is for pumping clean, turbid or slightly contaminated liquids. Occasional solid contaminations can be handled without affecting the pump due to the ...

Flow: 300 m³/h
Pressure: 0 bar - 16 bar
Head: 95 m

Pumps of the series ULN are horizontal, self-priming, single-stage volume casing pumps with dimensions and nominal outputs according to EN 733 / DIN 24255 in back pull out construction. The back pull ...

Flow: 740 m³/h
Pressure: 0 bar - 16 bar
Head: 90 m

... replacing the motor without disturbing the pump. There is no common shaft for pump and motor, standard motors can be used. The set is a space saving easy to install pump unit. Applications: Volute ...

The propellant pump is especially suitable for bringing liquified propellants with a low boiling point to a high pressure. The pump guarantees a constant propellant pressure in the supply line and in ...

... Pamasol diaphragm pump has been developed to fill suspensions with HFA 134a or 227. It is specially appropriated to pump the suspension continuously from the mixing tank to the machine ...

Flow: 600 m³/h
Pressure: 16 bar
Power: 200 kW

ECW series are single stage, end suction, back pull out, top centreline discharge type. These are offered with different material of construction to handle clear and slight raw water. Dynamically balanced impeller ensures vibration and ...

Flow: 720 m³/h
Pressure: 16 bar
Head: 110 m

Single stage chemical process pumps are mainly used to handle different type of chemicals with slight impurities. These pumps are offered with different material of construction according to the liquid ...

Flow: 2,500 m³/h
Pressure: 16 bar
Head: 100 m

Medium consistency pulp and process pumps are used to handle different type of syrup, molasses, pulp, paper stock, raw water etc and it can be used maximum consistencies upto 8%. Dynamically balanced semi open impeller ...

Flow: 85 l/min
Head: 19 m
Power: 500 W

... M cable and plug •Suitable for dispensing diesel, heating oil, hydraulic oil, machine oil, engine oil, etc •Pump interior in aluminium •Ready-to-use kit, including a pump, media resistant ...

Pressure: 8 bar
Fluid temperature: 100 °C

Output diameter: 25 mm

Pressure: 400 bar
Fluid temperature: -20 °C - 80 °C

The BM-B Pump is a versatile unit that can be used with injectors, series progressive divider valves or dual line systems. It is ideal for medium- and large-sized machinery, with a maximum working pressure is 5800 PSI. ...

Pressure: 300 bar
Fluid temperature: -25 °C - 60 °C

The Electric Barrel Pump can easily operate with all styles of lubrication systems including progressive, injector, direct, and even dualine. AC or DC Electric Barrel Pumps will replace the air or hydraulic ...

Flow: 0.005 l/min
Pressure: 250 bar
Power: 50 W

... controls the pump to delivers the rated amount of lubricant to the lubrication point at the right time. Each pump outlet has an over pressure protection valve and each outlet can support a lubrication ...

Flow: 0 l/h - 1,600 l/h
Pressure: -0.8 bar - 2 bar

Easy to replace valves Single-piece bellows Conveys sample gas with condensate Proven pump technology Attractive price Requires little space Mounting accessories and fittings optional Housing version ...

Flow: 0 l/h - 1,600 l/h
Pressure: -0.6 bar - 1.4 bar

Easy to replace valves Single-piece bellows Conveys sample gas with condensate Proven pump technology Attractive price Requires little space Mounting accessories and fittings optional Housing version ...

Flow: 800, 400 l/h
Pressure: -0.6 bar - 2 bar

... Conveys sample gas with condensate Long life Atex versions (see separate data sheet) Low noise emission 115 V - versions with FM C-US approval C-versions specifically for conveying flammable gasses Bypass valve ...

Flow: 15.9 l/min - 24 l/min
Pressure: 0 bar - 20 bar
Power: 0.1 kW - 0.8 kW

The pumps of the IOTA series, produce a flow from 19 to 24 l/min and operate at max. 20 bar pressure. They are generally driven by engines, electric and hydraulic motors. The pumps of this series ...

Flow: 48.1 l/min - 71 l/min
Pressure: 0 bar - 20 bar
Power: 0.4 kW - 2.5 kW

The 3-diaphragms pump ZETA 70 produces a flow of 71 l/min and operates at a maximum pressure of 20 bar. It is available with single or double splined/cylindrical shaft. Semi-Hydraulic diaphragm pump ...

Flow: 57.3 l/min - 85 l/min
Pressure: 0 bar - 20 bar
Power: 0.5 kW - 3.1 kW

The 3-diaphragms pump ZETA 85 produces a flow of 85 l/min and operates at a maximum pressure of 20 bar. It is available with single or double splined/cylindrical shaft. Semi-Hydraulic diaphragm pump ...

Pressure: 250, 500, 350 bar

Constant displacement pump with positive locking piston control Low noise level 600 - 1800 rpm speed range Incl. connection flange and screws

Flow: 0 l/min - 5,000 l/min
Head: 0 m - 98 m
Power: 11 kW - 75 kW

... MDW is dimensionally compliant with the international standard (ISO2858, 3661) and is interchangeable with conventional sealed centrifugal pumps.

Flow: 0 l/min - 4,000 l/min
Head: 0 m - 55 m
Power: 4 kW - 37 kW

... transfer of strong acids and alkalines as well as nearly all chemical solvents. Superior durability The exterior of the pumps is covered with ductile cast iron. Ample pressure resitance has been provided in the rear ...