Lutz oil pumps

Flow: 15, 11, 6 us gal/min
Pressure: 307, 207, 172 Pa
Weight: 14.8, 17.2, 15.9 kg

The Muncie Power S Series hoist pump was designed specifically for use on small single or tandem axle dump trucks. The S Series hoist pump features a roller bearing design and can ...

Flow: 0 m³/h - 31.8 m³/h
Head: 0 m - 435 m
Power: 0.37 kW - 5.5 kW

... reducing power consumption & thereby reducing cost of operation. The motors are filled with special food non-toxic dielectric oil, which lubricates the ball bearing and axial thrust bearings. It also offers insulation ...

Flow: 5 l/min
Pressure: 2 bar - 7 bar
Head: 70 m

New pump line with a brand new designing that offers reinforced pumping potentials. The updated designing provides even bigger performance provided with economy Benefits • Optimal performance • Economical air consumption, ...

Flow: 0 m³/h - 42 m³/h
Head: 1.5 m - 16 m
Power: 0.75 kW - 1.5 kW

... fluids. It is also prohibited to position or to remove the pump by the electric cable. Maximum temperature of the pumped fluids: - Continuous duty: 50°C. Minimum pumping level: 10 cm. above the pump body. ...

... setting of extremely small pressures. The technical data are based on an air inlet pressure of 8 bar. The pumps of course also function perfectly at low pressures. Krautzberger diaphragm pumps ...

Flow: 0 m³/h - 54 m³/h
Head: 0 m - 16 m
Power: 0.5 kW - 2.6 kW

Submersible pumps for commercial applications Areas of application: Heavily contaminated and abrasive waste and drainage water 10 mm free passage Safe to run dry Controllable oil ...

Flow: 0 m³/h - 60 m³/h
Head: 0 m - 50 m
Length: 330 mm - 800 mm

... with a special flange support for hydraulic motors for installation on tanker trucks. These pumps are suitable for transporting various types of liquid, such as oil, wine, liquors and chemical products.

Power: 0.37 kW - 4,500 kW

4” rewindable oil filled submersible motors characterized by high torque, strong mechanical structure, high reliability. Suitable for vertical and horizontal operations.

Flow: 8 m³/h - 260 m³/h
Power: 0 kW - 15 kW
Fluid temperature: 40 °C

... motor and water pump assembly into one, with simple structure, convenient installation remove, cover a small area, easy to use and maintain, safe and reliable operation, no water polluted, etc. Use Condition: The ...

Flow: 0.43 l/min - 30 l/min
Pressure: 465 psi - 42,500 psi
Width: 180 mm

... liquid pump for pressure testing, chemical injection and hydraulic power. Compact in size, minimal weight and ability to operate in many environments. Hydratron AZ-1 Single Acting Air Driven Liquid Pump ...

Flow: 20 m³/h - 125 m³/h
Pressure: 16 bar
Head: 20 m - 125 m

... . How can centrifugal pump pump oil？The support of LQRY series waste oil transfer pump adopts the structure of double-end ball bearing support. The ...

Flow: 55, 70 l/min
Pressure: 8 bar
Head: 0 m - 70 m

1/2'' (12.7 mm) Alumınıum Body Dıaphragm Pump Maximum Capacity : 55 lt/min Fluid Inlet-Outlet : 1/2'' NPT Max. Fluid Outlet Pressure : 8 Bar Housing Material : Aluminium Center Section Material : Polypropylene Diaphragm ...

Pressure: 2,000 bar - 7,000 bar
Power: 7.5 kW - 55 kW

... products As the only manufacturer of ultra high pressure amplifiers in France, HYDROPROCESS® offers a wide range of high-pressure pump from 2000 to 7000 bar and from 7.5 kW to 55 kW. Our ultra high pressure amplifiers ...

Flow: 0.1 m³/h - 300 m³/h
Pressure: 0 bar - 48 bar

... salinity laden liquids for example). This pump is also suited for general industry, wastewater, oil & gas and marine applications. ​ As the pin joint system is a critical part for any progressing cavity ...

Flow: 5,000 m³/h
Head: 1,200 m
Fluid temperature: 200 °C

The pump shell is separated horizontally on the axis line, the upper part is the pump cover, the lower part is the pump body, the suction inlet and outlet are on the pump ...

Flow: 600 l/min
Pressure: 0.001 Pa
Power: 9.6 kW

The portable/mobile/ hand-carried fire pump pompa air api portabel Bomba contra incendios is composed of 4-stoke engine, priming device and centrifugal water pump. It’s a kind of multi-purpose pump, ...

... Especially suitable for oil and water separators, plate frame filter press and other equipment. The STD series screw pump is flange connection reducer motor direct-linked structure,which is compact ...

Pressure: 275 bar

... of the most reliable manufacturer of Vane Pumps for Refuse Vehicles. Whether they are for OEMs or Resellers or Operators. Visit our products offer on HOF solution for Refuse Vehicles click here SINGLE PUMPS ...

Flow: 0 m³/h - 30 m³/h
Head: 0 m - 50 m
Height: 226 mm - 960 mm

Summary of pneumatic air operated diaphragm pump QBY pneumatic air operated diaphragm pump is the one of the most innovative pump. For all kinds of corrosive liquid, with particles, ...

Flow: 0 l/min - 820 l/min
Pressure: 0 bar - 50 bar

Pumped Liquid Hydraulic oils, synthetic hydraulic liquids, native oils, lubricating oils Main Fields Of Application For generation of pressure in oil-hydraulic ...

Flow: 330 m³/h - 48,000 m³/h
Power: 0.37 kW - 15 kW
Fluid temperature: -20 °C - 150 °C

... delivered to the outlet. With this circulation, the medium (material) is delivered through the pump continuously. Universal cam and rotor transfer pump is suitable to tenderly transfer high-viscosity ...

Flow: 430 m³/h
Pressure: 10 bar
Head: 90 m

RN pumps Centrifugal pumps with closed impeller according to EN 733 norms. Discharge sizes from DN 32 to DN 150. Use RN pumps can handle clean and non-aggressive liquids for the pump ...

Flow: 0 us gal/min - 6,600 us gal/min
Pressure: 0 psi - 150 psi
Head: 0'00" ft - 300'00"

TYPE MC Horizontal single-stage centrifugal pump in back pullout design. Pumping of abrasive and corrosive liquids All components which are in contact with the liquid are made of SICcast Suction flange: Axial Discharge ...

Fluid temperature: 0 °C - 120 °C

... environments. • Does not require clean dry air to function properly and pumps particles up to 1/8 inch in diameter. • The AP4+ air valves can pass 90 weight oil without fouling. ...

Pressure: 1 bar - 200 bar

... metering pump. With extremly small clearances and an optimal gear geometry the ADP has a very high volumetric efficiency also at difficult combinations e.g. high pressure together with low turning speed ...