- Hydraulics - Pneumatics >
- Pump >
- Oil pump >
- Lutz
Lutz oil pumps
Flow: 9.5 us gal/h - 114.3 us gal/h
Pressure: 45 bar - 225 bar
The LK Series metering pump is the largest in the high performance line of pumps from Walchem. The LK is a motor-driven, mechanically actuated diaphragm metering pump with a maximum capacity ...
Flow: 300 m³/h
Pressure: 0 bar - 16 bar
Head: 95 m
Pumps of the series ULN are horizontal, self-priming, single-stage volume casing pumps with dimensions and nominal outputs according to EN 733 / DIN 24255 in back pull out construction. The back pull ...
Flowserve SIHI Pumps
Flow: 600 m³/h
Pressure: 16 bar
Head: 95 m
... removing the pump casing from the pipe work. If a spacer coupling is installed it is also unnecessary to disconnect the motor. Applications: The volute pumps of the series ZHN are part of the overall ...
Flowserve SIHI Pumps
Flow: 600 m³/h
Pressure: 40 bar
Head: 90 m
... removing the pump casing from the pipe work. If a spacer coupling is installed it is also unnecessary to disconnect the motor. Applications: The volute pumps of the series ZEN are part of the overall ...
Flowserve SIHI Pumps
Pressure: 40 bar
Fluid temperature: -20 °C - 180 °C
Screw pumps for industrial use series SSP (low pressure) and HSSP (high pressure) Service For all pumps Universal Hydraulik guarantee maintenance and repair.
Flow: 720 m³/h
Pressure: 16 bar
Head: 110 m
... variable speed options. Features Tangential discharge casing Hard metal and wide passage closed impeller Large oil sump with oil mist / oil bath lubrication for prolonged bearing ...
C.R.I. Pumps
Flow: 15,600 m³/h
Pressure: 16 bar
Head: 110 m
End suction pumps can be supplied in vertical execution as sump pump to handle different type of liquid for various applications in industries. These pumps are offered with enclosed or ...
C.R.I. Pumps
Flow: 0.96 m³/h
Head: 0.96 m
Power: 0.18 kW - 0.37 kW
C.R.I. 2″ G – Flow Series deep well / bore hole submersible pumps are designed to offer as a compact kit with pump, motor and control box in one pack. These pumps are ...
C.R.I. Pumps
Flow: 85 l/min
Head: 19 m
Power: 500 W
... mineral oil products •Filling and refilling of material stored in drums or containers •Suitable for idle running •230 V / 500 W motor with A 5 M cable and plug •Suitable for dispensing diesel, heating oil, ...
Pressure: 31 bar
Fluid temperature: 5 °C - 40 °C
... Lubricator is an automatic, robust and durable pump. Its compact size is designed to fit your space requirements and lubrication demands. The SureFire II Lubricator is a self-contained electric motor-driven ...
Delimon
Pressure: 31 bar
Fluid temperature: 5 °C - 40 °C
VISCOSITY RANGE - 20-1500 CST PHASE - 1 PHASE HZ - 50/60 MOTOR ELECTRICAL CONNECTOR - CABLE GLAND INTEGRATED CONTROLS - TERM STRIP + MOMENTARY SWITCH LEVEL MONITORING - LLS PRESSURE GAUGE - INCLUDED RESERVOIR - 3L OUTLET THREAD ...
Delimon
Pressure: 9 bar
Fluid temperature: 5 °C - 40 °C
VISCOSITY RANGE - 20-1500 CST MOTOR ELECTRICAL CONNECTOR - CABLE GLAND INTEGRATED CONTROLS - TERM STRIP PRESSURE GAUGE - INCLUDED OUTLET THREAD - 1/4BSPP RETURN LINE THREAD - 1/4BSPP IP RATING - IP54 OPERATING TEMPERATURE RANGE ...
Delimon
... that comes out from impeller into pressure to force oil circulation. The pump can be a part of the pipe line due to the inlet and outlet of the pump are in the same axis. Therefore, ...
ERG Technology
Flow: 0 l/h - 2,700 l/h
Pressure: 0.3 MPa - 1.5 MPa
Power: 0.25 kW - 1.5 kW
... The result is the employed compact and rigid mechanism. An outdoor installation is due to the fully enclosed oil bath lubrication possible. Various Typs and material Fitting for nearly any application ...
Flow: 0 l/h - 6,000 l/h
Pressure: 0.2 MPa
Power: 4.8 W - 200 W
The suction side of these diaphragm air pumps can be used as a vacuum pump and discharge side can be used as compressor. By the compact and light construction the APN ...
Flow: 0.9 m³/h - 36 m³/h
Pressure: 7 bar
Almatec E-Series State-Of-The-Art Plastic AODD Pumps The development of the E-Series was based on the extensive experiences with the proven pump models. The solid design with distinctive wall thicknesses, ...
... a mess-free and hassle-free operation. The Macnaught ATF Hand Pump 20L provides approximately 14 strokes per litre, and is suitable to use with ATF, gear oil, engine oil, and hydraulic ...
Macnaught Pty Ltd
... a mess-free and hassle-free operation. The Macnaught ATF Hand Pump 60L provides approximately 14 strokes per litre, and is suitable to use with ATF, gear oil, engine oil, and hydraulic ...
Macnaught Pty Ltd
Flow: 10 l/min
... within pump body Motor is protected by IP55 rating Supplied with connection cables and alligator clips Pump is suitable to use with Diesel, Kerosene and light oil with viscosity less ...
Macnaught Pty Ltd
Flow: 15 l/min
Pressure: 24 bar
Flow: 35 l/min
Pressure: 8 bar
Flow: 18 m³/h - 2,000 m³/h
Pressure: 0.3 MPa - 2 MPa
Head: 20 m - 500 m
... monitors the operation of the diesel engine and the pump. The controller is equipped with various sensors and relays that monitor parameters such as engine speed, oil pressure, water temperature, and ...
Shanghai Kaiyuan Pump Industrial Co., Ltd.
Flow: 4 m³/h - 1,200 m³/h
Head: 8 m - 150 m
Power: 2.2 kW - 180 kW
... Hydraulic pump develops into HOT WATER CIRCULATION PUMPS (KYWR/KYLR), chemical engineering pump (KYHL), oil pump (KYYG) and ex proof chemical pump ...
Shanghai Kaiyuan Pump Industrial Co., Ltd.
Flow: 1.5 m³/h - 1,200 m³/h
Pressure: 1.6, 2.5 MPa
Fluid temperature: -20 °C - 120 °C
... hot-water pump, model KYWH Chemical pump, model KYWB oil pump and model KYWHB horizontal anti-explosion chemical pump etc. series products are designed ...
Shanghai Kaiyuan Pump Industrial Co., Ltd.
Flow: 12 m³/h
Power: 0.37, 0.25 kW
Weight: 8, 12 kg
The FL20C centrifugal pump is well known for its small size and high performance. Despite their small size, these pumps can provide flows up to 12 m3/h with good outcomes. FL20C pumps ...
Flow: 366.5 m³/h
Pressure: 1,100 bar
Fluid temperature: -40 °C - 200 °C
... The RDP series of Reciprocating Plunger Pumps is suitable for handling most liquids for Oil & Gas, Industrial and Wastewater Treatment applications. RP's RDP pump series are a type of ...
RUHRPUMPEN
Flow: 2,886 m³/h
Pressure: 26 bar
Head: 235 m
... centrifugal pump that works around a basic hydraulic and mechanical concept to guarantee its efficiency across a broad range of operating conditions, application flexibility and interchangeability. Overview The CPP ...
RUHRPUMPEN
Flow: 1,817 m³/h
Pressure: 150 psi
Head: 914 m
... , centrifugal pump designed mainly to handle up to 6% paper stock, water and other fluids found in all industrial, mining, steel, chemical and food process applications. Overview CHARACTERISTICS Single stage, overhung ...
RUHRPUMPEN
Flow: 11 m³/h - 11,500 m³/h
Head: 120 m
... space requirements Multistage canned vertical turbine pumps offer the same versatility and performance as our lineshaft pumps and are ideal for closed-loop boosting. These are short-set lineshaft pumps ...
Flow: 57 l/min
Pressure: 10 bar
... applications of low viscosity fluids, diesel, non aggressive fluids, short distances without reels. Needle valve for regulating pump speed is included. Designed for quiet and reliable operation and for 200l drums, spout ...
Flow: 0 us gal/min - 160 us gal/min
Length: 450 mm
Width: 333.5 mm
... conductive acetal or conductive polyvinylidene fluoride (PVDF) pumps are not to be installed in applications where the pumps may be subjected to oil, greases and hydraulic liquids. ...
Flow: 0 us gal/min - 234 us gal/min
Length: 208 mm
Width: 381.22 mm
... ATEX-certified AODD pump is suited for use in potentially hazardous environments, including those containing chemicals, oil and gas. Versamatic delivers the safety of ATEX compliance in the pump ...
Flow: 0 us gal/min - 234 us gal/min
Length: 508 mm
Width: 381.22 mm
... ATEX-certified AODD pump is suited for use in potentially hazardous environments, including those containing chemicals, oil and gas. Versamatic delivers the safety of ATEX compliance in the pump ...
Pressure: 63 bar
Power: 0.18, 0.12 kW
Fluid temperature: -10 °C - 60 °C
The pump is designed for the lubrication with plastic grease or oil of machines and equipment requiring continuous lubrication in small quantities. The lubricant is fed to each receiving ...
Flow: 0.15, 0.25 l/min
Pressure: 400, 200 bar
Power: 0.75 kW
The pump is designed to lubricate friction nodes in machines and devices through dosing distributors (two-way feeders). It is recommended for use in high-load machines and devices, with a large number of lubrication ...
Flow: 10 m³/h - 1,400 m³/h
Weight: 142 kg - 1,956 kg
The Linatex pump, type III R, belongs to the latest generation of successful wear-resistant and corrosion resistant slurry pumps and has an improved efficiency. It has in practice proven durable Linatex ...
Flow: 1,000 m³/h
Pressure: 5 MPa
Fluid temperature: 30 °C - 230 °C
... are located on the same horizontal line, vertical installation, small footprint, easy installation. The pump has a separate bearing frame and the bearings are grease lubricated. The pump ...
Flow: 3 m³/h - 1,000 m³/h
Pressure: 27.5 MPa
Head: 2,450 m
... temperature chemically neutral or corrosive liquids; refinery oil and gas, petrochemical, coal chemical, water injection, pipeline, boiler feed water, etc. Refinery, oil and natural gas, petrochemical ...
Flow: 25 m³/h - 2,700 m³/h
Pressure: 31 MPa
Head: 2,600 m
... designed for low cavitation conditions. ◉ Application: Crude oil, petroleum products, water, seawater and other liquids that are pure or contain a small amount of impurities; Crude ...
Flow: 20 l/min
Pressure: 20 bar
Fluid temperature: 60 °C
Three-diaphragm pump with reinforced Polypropylene circuit, Kynar/AISI 316 valves (LFP version), AISI 316 diaphragm mounting components, Viton seals. Version: SP (cylindrical with shaft key), CR (reduction gearbox ...
Annovi Reverberi
Flow: 38, 34, 31 l/min
Weight: 3.6, 3.2 kg
... tractors, excavators, caterpillar, trucks, etc.; the pumps are not suitable for other media and therefore not for oils, gasoline or water. Protank 25, non-self-priming pumps for diesel ...
Flow: max 1200.0 us gal/min
Pressure: max 8.0 bar
Head: 310'00"
QC Series Centrifugal pumps are built and designed in compliance with 3A Standards, with the following characteristics: Open Impeller Volute casing with central suction Fittings: Clamp (standard), Flange, NPT thread, ...
Q-Pumps
Flow: 0.5 l/h - 4,000 l/h
Pressure: 16 bar
The pump is available in the size 22 with cast iron housing. It is equipped with long-lasting, wear- and maintenance-free flexible joint without oil filling (prevents contamination of the media). Benefits ...
Flow: 0 us gal/min - 7,000 us gal/min
Fluid temperature: 550 °F
Hot Oil Pumps Most of Cornell’s W, Y, RB and H series clear liquid pumps can be used in hot oil applications, allowing for flows up to 7,000 GPM and heads up to 540′. Features ...
Flow: 17 m³/h - 1,035 m³/h
Head: 28 m - 65.8 m
... identifies it as a Cornell pump. The higher efficiency and lower maintenance requirements of Cornell’s self-priming pumps can translate into thousands of dollars saved in fuel costs, ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining