- Hydraulics - Pneumatics >
- Pump >
- Wastewater pump >
- Lutz
Lutz wastewater pumps
Flow: 10 m³/h - 30 m³/h
Pressure: 12 bar
Power: 5.5 kW - 11 kW
The “Dragon ME” series represents the evolution of the Dragon piston pumps series with the addition of the membrane unit in case of pumping highly abrasive liquids. Flow ranges: from 20 to 30 mc / h - in single mode ...
Flow: 10 m³/h - 60 m³/h
Pressure: 12 bar
Power: 5.5 kW - 11 kW
... under control. Flexibility of use and structural strength. In order to achieve these results the pumps had to be equipped with a proportional hydraulic pump, capable of constant power adjustment and ...
Flow: 1 m³/h - 10 m³/h
Pressure: 12 bar
Power: 1.5 kW - 5.5 kW
Piston Pump - "Libra" Series from 1 to 10 mc/h Pressure up to 15 bar Many materials configuration For pressure transfer of viscous liquid For sludge feeding of Filterpress For chemical Industry, metal finishing ...
Cast iron pump pushes 500 litres per minute, debris up to 3mm, and a total head of 50m. Maximum output capacity (L/min) - 500 Inlet/outlet diameter thread type (mm/inches) - 50/2-PF Total head (m) - 50 Suction head ...
Honda France S.A.S.
Honda France S.A.S.
Honda France S.A.S.
Flow: 0.12 l/h - 3,300 l/h
Pressure: 30 psi
Power: 1 ch
... control range from 0.1 to 360 rpm in 0.1 rpm increments Keypad incorporates 3-level security PIN lock IP66 (NEMA 4X) cased pumps Remote Analogue/Digital, RS485, PROFIBUS®, PROFINET®, SCADA and EtherNet/IP™ control options
Watson-Marlow Fluid Technology Group
Flow: 0.0039 l/min - 3 l/min
Pressure: 5 psi - 50 psi
Fluid temperature: 60, 49 °C
... is maintained over the entire flow range of the pump. Standard Bellows Metering Pumps are designed to displace both corrosive and non-corrosive fluids. Accurate to ± 0.5% from stroke to stroke, when ...
Flow: 0.1 m³/h - 6,700 m³/h
Pressure: 16 bar
Head: 0.1 m - 3.5 m
Wet-installed horizontal propeller pump with submersible motor, equipped with direct drive or spur gear, ECB propeller with rigid, fibre-repellent blades, bolt-free connection to the discharge pipe. Explosion-proof version ...
KSB
Flow: 1,590 m³/h
Pressure: 690,000 Pa
Head: 43 m
This Model HS and HSD eliminates clogging problems encountered with conventional centrifugal pumps. The recessed impeller design handles large particle solids and fibrous/stringy materials. Any spherical ...
Goulds Pumps
Flow: 2,200 m³/h
Head: 70 m
Fluid temperature: 40 °C
... centrifugal pump (ASCP series) is a single-stage centrifugal pump equipped with a submersible motor. The series has a range of different impellers - open, semi-open and closed. The design not only allows ...
ANDRITZ
Flow: 12 m³/h - 118 m³/h
Pressure: 31 bar
... processing, meat processing, wastewater, chocolate, adhesives, polymers, asphalt, sludges, slurries Details: High viscosity High pressure Runs dry without damage High temperature High vacuum ...
Tuthill
Flow: 40, 30, 19, 10, 7.1 m³/h
Pressure: 20 bar
Power: 30, 22, 18.5, 11 kW
Ceramic plunger pump is widely used in transfer every kinds of stone wastewater. Marble Granite Wastewater Mud TTansfer Plunger Pump |Mud TTansfer Pump ...
Fujian Nanxing Environmental Technology Co.,Ltd
Flow: 200 m³/h - 5,500 m³/h
Head: 5 m - 70 m
The Fairbanks Nijhuis solids handling pumps have an international reputation for their solid handling capacity combined with high efficiencies. These pumps are available with a single channel impeller ...
Fairbanks Nijhuis
Flow: 70 l/min
Pressure: 8 bar
Head: 7.5, 4.5 m
Diaphragm pump in aluminum series AAB-12 with membranes in EPDM, balls and seats in acetal FLUIDSWASTE OIL | FRESH OIL | ANTIFREEZE | WINDSHIELD FLUID | WATER | DIESEL FUEL SECTORSAERONAUTIC | AGRICULTURE | AUTOMOTIVE ...
Flow: 50 l/s
Head: 40 m
Power: 7 kW
D ELECTRIC SUBMERSIBLE PUMPS FOR DRAINAGE Electric submersible pumps designed for raising drainage water. Thanks to their amenity and sturdiness they are used for draining out excavations even under ...
Caprari
Flow: 0.45 us gal/h - 550 us gal/h
Pressure: 1,575, 9,000 psi
... maximum performance Economical duplex configuration availability Compact design with a higher capacity in a small footprint Low maintenance Water and wastewater treatment. CENTRAC ...
Milton Roy
Max. capacity: 7,000 m3/h Max. discharge head: 15 mCL Max. temperatures: 200°C Maximum operating pressures: 10 bar Applications Chemical industry H3PO4, NaCl, Cl2, H2SO4, etc. Effluent pumping
Flow: 4.9 l/h - 76 l/h
Pressure: 1.7 bar - 20.7 bar
Safety Comes Standard with Every Pump Designed for environments that demand additional safety features, the E7 Explosion-proof chemical metering pump delivers the protection your chemical application ...
LMI Milton Roy
Flow: 1 m³/h - 200 m³/h
Pressure: 1 bar - 16 bar
Head: 5 m - 70 m
... fertilizer processing, biodiesel, general industry, air treatment, waste water treatment and desalination. Reliability: The CCL offers a wide range of shaft sealing and the pumps are also equipped ...
CDR Pompe
Flow: 0 m³/h - 140 m³/h
Head: 0 m - 44 m
Fluid temperature: 0 °C - 40 °C
Muti-stage Submersible Sewage Pumps WQD Model:WQD SHIMGE Pump has been committed to technical researches, manufacturing Muti-stage Submersible Sewage Pumps , as well as providing first-class ...
Shimge Pump Industry (Zhejiang) Co.,Ltd
Pressure: 0 psi - 725 psi
The Model 1450 Pressure Test Pump tests hydraulically for leaks in installations that are required to be leak proof and will test systems up to 725 PSI. Especially for use in heating, compressed air, refrigeration systems, ...
Flow: 30 us gal/min
Up until now, users of scale removal chemicals have had to rely on rudimentary re-circulating pump systems that are awkward to use and require constant attention when operating. There has been a great need for a system ...
Flow: 5,000 m³/h
Head: 65 m
Power: 1,000,000 W
The giant for corrosive and abrasive service environments NPC Mammut centrifugal chemical pump For pumping tasks beyond the norm: the NPC Mammut centrifugal pump is the problem solver for extreme tasks. ...
MUNSCH Chemie-Pumpen GmbH
Flow: 1.2 m³/h - 9 m³/h
Head: 1.5 m - 7.6 m
Power: 0.25 kW
... submersible pump with mechanical seal in oil bath and oversized oil chamber. Possibility of fixed or mobile installation and suitable for domestic applications and large industrial drainage installations. AISI 304 ...
EBARA PUMPS EUROPE
Flow: 0.02 us gal/min - 450 us gal/min
Pressure: 0 psi - 2,100 psi
Fluid temperature: 260, 350, 210, 185 °F
For nearly 50 years, versatile L-Frame pumps have stood the test of time meeting thousands of application challenges with performance-enhancing, cost-saving features. Features Low total cost of ownership Simple pin-type ...
Moyno
Flow: 12 m³/h - 60 m³/h
Head: 20 m
Power: 11 kW
Flow: 0 m³/h - 300 m³/h
Pressure: 0 bar - 72 bar
Mono pumps are used in various industries, in most tough applications, without any problem, it can transfer fluids. As it is suitable for transferring high and low viscosity fluids it can also transfer abrasive, sticky, ...
Flow: 0 m³/h - 4,000 m³/h
Fluid temperature: 160, 110 °C
The Horizontal Centrifugal Pumps of the CP range are highly reliable pumps with very high performance. They can work in very harsh conditions and constant over time. The sturdiness of its structure allows ...
Bombas Ideal
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining