Mass flow needle valves

DN: 0.25 in - 1 in
Pressure: 6,000 psi

ASTM-A351-CF8M Screwed in bonnet, Rising stem, T handle operation, Threaded end, Working pressure 6000psi 10000psi (Forged casting body), Male x Female end

DN: 0.375 in

NEEDLE VALVE A 109 N Needle valve A 109 N • For accurate control of the oil flow, also under maximum pressure • Connection: 3/8" NPT female (2x)

Integrally forged, one piece double block and bleed Keyblok assemblies for primary isolation of pressure take-offs, where the valve is mounted directly to the vessel or process pipe Suitable for double block and bleed ...

DN: 100 mm - 300 mm
Pressure: 10 bar - 25 bar

DN 100 - 300 PN 10 - 25 Body: EN-JS 1050 Coating: Epoxy, Epoxy-Polymer-Ceramic (EPC) Innovative valves for secure regulation of pressure stages and flow rates. Designed as one piece Optimised flow behaviour and minimum ...

Pressure: 10.3, 20.7 bar

... adjustable needle valve that allows sufficient fuel flow to run the engine at an adjustable idle speed. Features and Benefits Easy to install Positive fuel shutoff (without needle ...

DN: 0.25 in

... digital readout in the handle allows qualified technicians to easily adjust the valve to achieve a highly accurate flow. Valve pressure drop can be read through the valves integrated ...

DN: 8 mm - 50 mm
Pressure: 1 bar - 40 bar
Temperature: -20 °C - 70 °C

For shutting off gas as described in DVGW code of practice G 260/ 1. These products are applicable on technical and commercial gases like Natural Gas, LPG, Bio Gas, Butane, Propane, and Air etc.

DN: 0.25 in - 0.5 in
Pressure: 0 bar - 420 bar
Temperature: -20 °C - 400 °C

The CP-06 offer a wide array of needle valves that are specifically constructed to be applied with liquids that both posses high pressure and temperature service. Fabricated from AISI-36 stainless steel, ...

DN: 0.125, 0.25, 0.5 mm

All styles available in PVDF, PPN and PFA All valves have FKM O-rings Needle Valves available in 1/8", 1/4" and 1/2" Ball Valves available in 1/4" and 1/2"

DN: 0.125, 0.25, 0.375, 0.063 in
Pressure: 10,000, 15,000 psi
Temperature: 650, 450, 350, 200 °F

... and AF6 for on-off service and insure long life on valve seats. Regulating tip stems are available at no additional cost, add - REG to the catalog number. Glands and sleeves are supplied with each valve ...

DN: 0.25, 0.375, 0.5, 0.75, 1 in
Pressure: 0 bar - 400 bar
Temperature: 0 °C - 240 °C

Indumart Needle Valves are high pressure isolation valves suitable for shutting-off the impulse line and for mounting to pressure instruments. They are mostly used in oil, gas, Chemical, ...

DN: 0.25, 0.375, 0.5, 0.75 in
Pressure: 0 bar - 350 bar
Temperature: -20 °C - 130 °C

The ZFT2251B series from Dicsa has a body made out of AISI 316 Stainless Steel and a needle made out of X 10 Cr Ni S 1809. It has a PTFE antiextrusion ring and a handwheel made out of GD Al SI 12. It also has a working ...

DN: 1, 0.75, 0.5, 0.25, 0.375 in
Temperature: 0 °C - 100 °C

BUENO's PTFE Needle valve is Designed with simplicity and easy of installation. Excellent chemical resistance Ideal for use with instrumentation fitting as a sample valve ...

DN: 0.25 in - 4 in
Pressure: 0 bar - 255 bar
Temperature: -269 °C - 230 °C

... Benefits Redfluid needle valves are designed to offer high performance. The closing by mobile obturation makes both the opening and the closing of the valve smooth, avoiding the seizure ...

DN: 0.125, 0.375, 0.5 in
Pressure: -1 bar - 20 bar
Temperature: -20 °C - 84 °C

... differential pressure, the High Resolution Valve provides superior performance over legacy needle valves. The high resolution electronic flow control valve The High ...

DN: 0.5 in
Pressure: 0 bar - 400 bar
Temperature: 0 °C - 250 °C

high pressure needle valve 1/2" inch block execution made of stainless steel 1.4571 pressure up to max. 400 bar design: - block execution product feature: - For precise control of the media . Ideal ...

DN: 0.25, 0.125 in

Made of extruded brass (CLA-360) and forged brass (CLA-377). Ideal for compressed air, oil, water and vacuum systems. Allows the control of ideal flow according to the requirement of the system.

... Carbon Steel Needle Valves combine rugged construction, dependablity and leak-free performance at high and low pressure, these valves exceptional properties and high flow capacities in ...

DN: 0.125 in - 1 in

... for you! Types Ball Valves -Full Bore & Reduced Bore, Cast & Forged Steel, Side & Top Entry Butterfly Valves – Soft Seated & Metal Seated High Performance Gate Valves – Standard ...

DN: 6 mm - 28 mm
Pressure: 414 bar
Temperature: -54 °C - 316 °C

... opening. The needle valve plug can achieve this function. Needle valve plugs are generally made of quenched steel long needles, while the valve ...

DN: 16 in
Pressure: 3,000 psi - 15,000 psi
Temperature: -75 °F - 250 °F

Jereh Choke Valve consists of needle type adjustable choke valve (JFK), positive choke valve (JFG), barrel type choke valve (JFT), cage type choke valve ...

DN: 0.25, 0.125 in
Pressure: 1,000,000 Pa
Temperature: 0 °C - 120 °C

... offers simple-type, precision-type and various other needle valves, and also manufactures flow controllers having a combination of a needle valve and diaphragm as well ...

DN: 7.5 mm
Pressure: 0 bar - 27.6 bar
Temperature: 0 °C - 82 °C

Singer Valve's 852-B Needle Valve Speed Control has a brass body and a stainless steel stem with a high quality fine thread for flow control. Its O ring packing ensures a leak proof and ...

DN: 100 mm - 2,000 mm
Pressure: 10 bar - 160 bar
Temperature: 70 °C

ERHARD Needle valve ERHARD Needle valve is the right valve to use whenever pressure heads or flow rates need to be safely and reliably reduced and controlled. ...

DESIGN Body consists of 2 screwed parts, with screwed top. OPERATION Rotation of the handlewheel. CONNECTION Female thread Vs - 2 PRESSURE RANGE AC1010xx(Brass) : PN 100 AC4010xx(carbon steel) : PN 120 / PN 400 AC3010xx(stainless steel): ...