- Hydraulics - Pneumatics >
- Pipe, Tube and Fitting >
- Flange >
- Masterflex
Masterflex flanges
Nominal diameter: 15 mm - 300 mm
... EPDM HT • - 130mmlength • - Dichromate zinc plated Steel swiveling flanges PN10/16 up to DN150. PN10 over • - On request. PN6. PN16 and Class 150 PN20 flanges • - AISI 316 flanges ...
... 11851/ISO/inch ► Reducing pieces ► Small flanges PN 6/PN 10 ► Flanges ► Aseptic unions K-system/DIN 11864-1 ► Aseptic clamp connections DIN 11864-3 ► Aseptic small flanges ...
... Type Joint Flange (RTJ), Reducing Flange, Raised Face (RF) Flange, Orifice Flange, Large Diameter Flange, Custom Flange, Drawing Flange, ...
Nominal diameter: 0.5 in - 12 in
SIZE: 1/2"~12" CONFORM TO: ASTM D2467 (SCH80) ASTM F439 STANDARD: ANSI WORKING PRESSURE: 150PSI
Nominal diameter: 0.5 in - 12 in
SIZE: 1/2"~12" CONFORM TO: GB/T 4219.2-2015 GB/T18998.3-2003 STANDARD: DIN WORKING PRESSURE: PN16
Nominal diameter: 0.5 in - 4 in
SIZE: 1/2"~4" CONFORM TO: GB/T 18742.3-2017 STANDARD: DIN WORKING PRESSURE: PN16
... standard Gr1 titanium flange is a mechanical device used to connect pipes, valves, pumps, and other equipment to form a piping system. Flanges are available in different materials, and one of the most ...
... possible to realize special fittings as per your drawing. Flanges Production of UNI2276, UNI2277, UNI2278 and UNI-EN 1092 (the latest European standard) standard flanges and all kinds of flanges ...
Nominal diameter: 65 mm
Angle flange, ISO 15552, Ø160, 1 piece with 4 screws
RIEGLER & Co.KG
The Efficient, Safe Way to Align Materials. The DOG & WEDGE and CUT-OFF C-CLAMP methods of material alignment are messy, time consuming, and unsafe! Align materials in the fabrication of water tanks, bulkheads, deck sections, flat ...
The PG-S series, manufactured by Strong Hand Tools®, is an alignment flange. It gives more convenience in holding circular or square tubes utilized for butt - welding. In addition, it comes with an opening that is broad ...
For use in automobile propeller shafts. To protect and centre the universal joint at the flange. Highly ductile punched parts made of steel sheet, pressed in and tacked with the heat-treated steel center wheel. Subsequent ...
Nominal diameter: 15 mm - 200 mm
... PN 25/40 according to NF EN 1092-1 • 150 LBS/300 LBS according to ASME/ANSI B16.5, EN 1759-1 RELATED PRODUCTS • Swivel Flange End UTS coupling • Assembly kit (nut + screw + fiber gasket)
Trelleborg Couplings & Accessories
... saving in China and a global leader. Flange, also called flange flange or flange. Flange is a part that connects between shaft and shaft and is used ...
This flange is used for medium pressures and suction hoses. The rubber flange means that the hose can remain relatively short, starting from a maximum angle of curvature. And because the wear layer rubber ...
Trelleborg Infrastructure
Nominal diameter: 15 mm - 89 mm
Flanges of the series "FFS" allow the fixing on the oiltank of inlet and outlet tubes and the maintenance or simply the check of the semi-immersed filters into the oiltank.
OMT Group
Nominal diameter: 0.75 in - 8 in
... pressure Class 150 companion flange is used in residential and commercial plumbing applications. The flange features a solder copper adapter and a steel flange. This fitting provides ...
Nominal diameter: 50 mm - 300 mm
... Advantages Assembly time reduced by 50 % with the Securing clamp Express thanks to only 2 tightening screws in combination with suspension joint and one-piece design Especially strong flanges for ...
SAE single-part butt-weld flanges and SAE butt-weld counterflanges types BFX-ST/BAS-ST for high-pressure tubes (Schedule 80/160/XXS), BFX-STRE/BAS-STRE for high-pressure tubes (Schedule 40) and BFX-SRE/BAS-SRE for metric ...
... they achieve, making them unsuitable for the majority of critical alignment applications. One clamp can fit up a variety of sizes of pipes, elbows, tees, flanges end caps and most other pipe fittings ...
FIXE FLANGE TYPE 11B WELDING NECK-RAISED FACE PN 10/16 - STEEL
Nominal diameter: 80 mm - 300 mm
DN 80 - 300 PN 16 Body: EN-JS1050 Coating: Epoxy, Enamel Saddle Clamps premium for steel, cast iron and fibre cement pipelines. Suitable for gas and water house service lines. With DIN-DVGW-Type Examination Certificate.
Nominal diameter: 50 mm - 1,000 mm
Pressure grade: for hot-melt butt flange with dn<630mm, the maximum nominal pressure is 1.6MPa. For hot-melt butt flange with dn≥630mm, the maximum nominal pressure is 1.0MPa. Executive standards: ...
Shandong Donghong pipe Industry Co., Ltd
Nominal diameter: 350 mm - 1,600 mm
... condensates. JACOB’s range of flanges provides the ideal solution for this purpose. IMPLEMENTATION JACOB flanged pipework is available in wall thicknesses from 1 to 3 mm. Pipe components and pressed ...
Fr. Jacob Söhne GmbH & Co. KG
Nominal diameter: 10 mm
The TP series is a Stainless steel blind flange manufactured by FG INOX. This TP series has a nominal diameter that ranges from 10 mm to 80 mm, and a diameter starting 90 mm to 200 mm. The series has a weight that ranges ...
PRODUCT: Stainless Steel fittings comply with ASME BPE standards. Gaskets are made from compounds which are FDA approved and USP 87, 88 Pharmaceutical Class VI certified. SIZES: Stainless Steel fittings are available in sizes ¼ - 6 ...
The Flange Plain pipe connector from AWH is constructed from high grade components to attain the strictest quality requirements. Each unit comes with WAZ 3.1 DIN EN 10204, with 3.1 AD2000-W2 as another option upon request. ...
Armaturenwerk Hötensleben GmbH
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining