MATTEI industrial compressors

Flow: 281 m³/h

The F model series offers modern open compressors for external drive (via V-belt or clutch). Force transmission is by a form-fitting shaft connection. Nearly all drive-related requirements are possible. The compressor ...

Shaangu’s axial compressors with market share of 96%. The maximum size of Shaangu axial compressors is AV140.

Pressure: 30, 40 bar

G04 COMPRESSOR The G04 is built with the unique ERVOR flat-twin and monobloc piston architecture: Short piston stroke and a linear speed below 1.8 m/sec. (compressors from the competition usually have ...

Power: 1.49 kW - 7.45 kW

A complete and versatile range of semi-professional and professional piston compressors available, all tank mounted and with or without dryer. Different configurations allow a wide scope of uses, going from DIY applications, ...

Pressure: 150, 350, 230, 400 bar

Compressor combibed with air dryer. Gas to be compressed - air, inlet gas - dry air, drop point -60ºC. Compressor is unigue in its design and have no analogs in Russia ...

Pressure: 130 psi

VIAIR 90 Series compressors offer a light duty solution for smaller air requirements and are meant to fill no larger than a 1 gallon air tank. Multiple duty cycle, mounting, compressor finish and intake ...

Flow: 54 m³/h - 129 m³/h

Inside the rotor slots (1), positioned eccentrically in the pump cylindrical housing (2), free moving vanes (4) are inserted (3). When the rotor turns, the centrifugal force throws the vanes against the cylindrical wall creating multiple ...

Pressure: 0 bar - 10 bar
Flow: 0 m³/h - 6,100 m³/h

The rotary compressor is made up of a cylindrical stator, inside of which a rotor, supported at its ends by two bases, rotates. This eccentrically fixed rotor has some slots where the vanes that slide over the internal ...

Pressure: 20 psi - 100 psi

... mounted air compressors are fully automatic, and virtually maintenance free. OL Series riser mounted compressors are designed to be easily installed either vertically or horizontally to the riser. Units ...

Pressure: 0 bar - 4 bar
Flow: 582 m³/h - 852 m³/h
Power: 46 kW - 54 kW

The version S.C. has been projected to be used as compressor for empty hose reel irrigators. Standard features: available hose connections: Ø 2" G/ Ø 2" 1/2 G

Pressure: 7.5, 10, 13 bar
Flow: 0.56 m³/min - 50.8 m³/min
Power: 5.5 kW - 315 kW

ERS sériés from 5.5 to 315 kW is one of the best economical solutions for this range of air demands. Wide spread of industrial companies first choice can be always this range of ERS sériés because of easy maintenance ...

Pressure: 6 bar - 10 bar
Flow: 0.95 m³/min - 7.47 m³/min
Power: 7.5 kW - 45 kW

... Hydrovane HV (ACE) RS series of enclosed regulated speed rotary vane compressors provide a variable speed offering for the enclosed Hydrovane product selection. While fixed speed rotary compressors are ...

Pressure: 10 bar
Flow: 0.4 m³/min - 30 m³/min

VARIABLE SPEED WITH PERMANENT MAGNETS MOTOR from 9 to 180 kW F.A.D. from 0,4 to 30,0 m3/min Pressures from 7,5 to 10 bar

Pressure: 2 bar - 7 bar
Flow: 0 l/min - 80 l/min

... support customization of other parameters, please feel free to ask. The Working Principle of the Reciprocating piston Air Compressor: Under the drive of the electric motor, the piston in the cylinder makes a reciprocating ...

Pressure: 8 bar
Flow: 3.7 m³/min - 25 m³/min
Power: 30 kW - 160 kW

Portable screw air compressors were divided into two driving modes: diesel drive and electric drive. Portable air compressor as a temporary mobile operating equipment, are widely used in tunnels, mines, ...

Pressure: 10, 8, 13 bar
Flow: 9.5 ft³/min - 83 ft³/min
Power: 2 kW - 15 kW

Frank screw compressor is designed after many experiences for years in compressor market. The main purpose while designing Frank compressor was “ easy maintenance” which means that compressor ...

Pressure: 1 bar - 10 bar
Flow: 8 l/s - 350 l/s
Power: 8 kW - 100 kW

... The fuel cell is thus at the heart of the vehicle, the hydrogen “engine”. The compressor Hydrogen is converted into electricity in a fuel cell. The air supply compressor is an essential and critical ...

Pressure: 0 psi - 2,500 psi
Flow: 3.8 ft³/min - 10 ft³/min
Power: 7.46 kW

... series compressors are designed for continuous 24/7 operation in the most demanding industrial, medical and energy applications. These compressors are engineered for safe, reliable delivery ...

Pressure: 8 bar
Flow: 222 l/min
Power: 1.5 kW

Powerful and compact. The ideal compressor for those who need to have compressed air always available.

Pressure: 8, 12 bar
Flow: 100 l/min - 2,540 l/min
Power: 1 ch - 20 ch

Ozen piston compressors designed with a wide product range for using many different industrial applications. Compressors produce with mentality that quality is not control of the post ...

The series for application in medium and high performance liquid chillers as well as in industrial heat pumps. BITZER reinvents the mechanical capacity regulation! Improved system efficiency in full- and part load ...

Pressure: 10, 8, 13 bar
Flow: 0.6 m³/min - 2.3 m³/min
Power: 7.5, 15, 11 kW

Comparg A-Series are oil filled screw compressors designed for smooth and economical production of compressed air in industrial plants. They feature a compact, logically laid-out design, high quality ...

Pressure: 10 bar
Flow: 18 m³/h - 24 m³/h
Power: 2.2 kW - 3 kW

Rotary screw compressor – Coaxial drive – Electric engine directly linked to the screw unit: allows better yield – Oil separator filter SPIN-ON – Oil filter SPIN-ON – Oil/air cooling through forced ventilation radiator ...

Pressure: 0 Pa - 800,000 Pa
Flow: 60, 50, 37, 32 l/min
Power: 0.34 kW

The oil-lubricated BLUE-LINE compressor L-B50-4 is standardly equipped with a filter pressure regulator (manual condensate drain) and a 4 liter air tank.

Pressure: 8, 10, 13 bar
Flow: 360 l/min - 15,000 l/min
Power: 2.2 kW - 90 kW

... condensation and prolonging oil life. In this way, it works smoothly in all weather conditions. Compressor cabin and chassis and the equipment used in the compressor are resistant to corrosion and rusting, ...