METAL WORK single-stage pressure regulators

Pressure: 0 psi - 8,700 psi
Orifice diameter: 0.25 in
Temperature: -20 °C - 90 °C

High pressure piston controlled régulator Inlet pressure: up to 400bar (1000 bar on request) Outlet pressure: 0->400bar Compact size Tight adjustment Low internai ...

Pressure: 0 bar - 0.7 bar

... EPR is an electronic device useful to connect two or more torches to a single Oweld gas generator. When it is used? It is used in case of multi-torches connected to a single Oweld gas generator. Where ...

Pressure: 0 bar - 30 bar
Flow: 40, 6,000 l/min
Orifice diameter: 0.13, 0.38 in

... 's 30 bar (430 psig) electronic pressure regulator consists of high pressure solenoid valves, high pressure transducer, and intelligent electronics processing PID closed ...

Pressure: 0 bar - 4,000 bar
Orifice diameter: 1.5 in

Uniweld’s Single Stage, Mastar® RS Regulator Series feature: • Forged Brass Body • Machined Brass Bonnet • Easy-to-read single scale 1½” gauges • Mechanical stem ...

Pressure: 0 bar - 10 bar
Flow: 1,200 l/min - 1,700 l/min

Mini air regulator. Mechanized from a solid aluminium block. Diaphragm regulator from 0 to 10 bar. Quality pressure gauge up to 10 bar. Stand included for assembly on ...

Pressure: 150 psi

Pressure: 0.5 bar - 8 bar
Orifice diameter: 1 in
Temperature: 0 °C - 50 °C

pressure-control-valve 1" Inch made of plastic polyamid female thread seal NBR for air, set pressure 0.5 - 8.0 bar design: - straightway form installation position: - only in vertical position product ...

Pressure: 0 psi - 1,000 psi

... cardboard box Body burst pressure up to 4350 PSI These regulators are intended for primary pressure control on non-corrosive, high purity or liquefied gases (up to ...

Pressure: 0 bar - 16 bar
Flow: 900 l/min

... Can be wall mounted with ring nut for panel assembling or, on request, with bracket. * Usable on version for air (with relieving and red knob) or for water (without relieving and black knob). * Lockable safety knob. * ...

Flow: 4 l/h - 200 l/h

... principle The return pressure acts upon the underside of the diaphragm. The diaphragm along with the spring act together to react to system changes and to keep this constant pressure (vacuum) loss. As ...

Pressure: 0 psi - 5 psi

... stable air pressure put into the inlet in the die to control the ID inner diameter of the tube. Range are available from 0-3" of water up to the maximum of 0-5 psi. Meters are available in psi, inches ...

Pressure: 0 psi - 20,000 psi
Temperature: 0 °C - 49 °C

The NuQuip® Model PR Series Pressure Regulator is a pressure reducing device utilizing an air actuator for precise control of high pressures. These regulators ...

Pressure: 0.35 bar - 1.4 bar

Designed to reduce first stage pressure 5-20 PSIG (.035- 1.4 bar) down to a pressure higher than 11” W.C (28 mbar), the actual pressure setting is specified in the table ...

Pressure: 0 bar - 4 bar
Flow: 12 l/h

High pressure regulator for gas fluids as LPG (butane, propane) that ensures principally the function of single stage regulation in LPG equipment. Temperature working ...

Pressure: 0 bar - 50 bar

Maximal inlet pressure (bar) : 50 Outlet pressure (bar) : 0.5 - 12 Maximum discharge (nm3/h) : 400 Gas compatibility : Non corrosive gas + O2 and C2H2 and propane and butane

Pressure: 2 psi - 450 psi

... maintain an constant differential between the pressure on the discharge side of the regulator and the signal pressure loaded on the diaphragm. The Mark 64 provides the ...

Pressure: 5 bar - 50 bar

... Material Pressure Regulator MDR-LW04 is used to reduce pressures and to minimise the pulsation which occurs when material is conveyed using piston pumps. The working pressure ...

Pressure: 0 bar - 18 bar
Flow: 400 l/min - 800 l/min
Temperature: 0 °C - 60 °C

In-line pressure regulators F/F tared without relieving - RPL series Materials and components : - zinc body - other parts: brass, NBR, stainless steel Application range: compressed air - maximum ...

Pressure: 12 bar
Temperature: 60 °C

Maximum pressure: 12 Bars Maximum temperature: 60°C Filter element: Available

Pressure: 15 bar
Flow: 50 m³/h
Orifice diameter: 25 mm

V230Y Pilot Drive Self-operated Differential Pressure control valve, is composed of control valve body, actuator, positioning spring ,stainless steel bellows, external pressure ...

Pressure: 200 psi
Orifice diameter: 0.25 in

FEATURES - Measure precisely the tire pressure. - Release unnecessary pressure. - Inflate it quick. - Tire chuck change convenience. - Hose swivel connects the tire maneuverability. - Hanging hook ...

Pressure: 350 bar
Flow: 100 l/h

The HPRV High Pressure Reducing Valve is designed for high pressure lines in sample systems, with an inlet pressure of up to 350 barg.

Pressure: 0 bar - 350 bar
Orifice diameter: 50 mm

High Pressure Precision Regulator, Tradinco 8810 Designed to reduce gas inlet pressures safely up to 350 bar specifically for test applications. They accurately provide outlet pressure ...

Pressure: 1.5 bar - 50 bar
Flow: 0.2 m³/h - 30 m³/h
Orifice diameter: 0.13 in

Key advantages - This single stage regulator is based on the Cartridge seat Technology - Compact, ergonomic and lightweight design - Accurate pressure control ...

Pressure: 0.3 bar - 12.5 bar
Flow: 0.6, 0.2 m³/h

Application: The JA Single Stage Pressure Regulator is developed by Hongye. It is built suitable for jointing ,incision and pyrogenation. The unit is built with high quality performance ...