Flow: 5 l/min - 200 l/min
Pressure: 1 bar - 15 bar
Head: 1 m - 150 m
MD-CX Magnetic driven regenerative turbine electric pumps Hydraulic Performace Stainless steel electric surface pumps with magnetic drive peripheral impeller, ideal for increasing or maintaining circulating ...
SIMACO ELETTROMECCANICA
Flow: 5 l/min - 110 l/min
Pressure: 1 bar - 10 bar
Head: 0 m - 100 m
... those areas where the use of virtually inert components is critical. Pumps specially dedicated to industrial sectors/applications. Extensive versatility of these peripheral centrifugal pumps, ...
SIMACO ELETTROMECCANICA
Flow: 5 l/min - 60 l/min
Pressure: 1 bar - 10 bar
Head: 1 m - 120 m
Surface electric pumps in brass with peripheral impeller with mechanical seal, ideal for increasing or maintaining circulating pressures at medium-low hydraulic flow rates in closed-circuit systems. With pressures up ...
SIMACO ELETTROMECCANICA
Flow: 0.2, 0.4 l/min
Pressure: 40 MPa
Power: 0.75 kW
... been committed to the design and development of new technologies and new products. SOATOER Double Line Electric Lubrication Pump Fuel tank volume 30-60-100KG Applicable grease≤NLGI2 With high and low liquid ...
Flow: 0 m³/h - 76 m³/h
Power: 0.25 kW - 6 kW
CTI INDUSTRIAL PUMPS The CT pumps are open or semi open impeller single stage centrifugal pumps. They are manufactured in high finish and mechanically strong material ...
Tapflo
Flow: 0 m³/h - 76 m³/h
Power: 0.25 kW - 6 kW
CTH HYGIENIC PUMPS The CT pumps are open or semi open impeller single stage centrifugal pumps. They are manufactured in high finish and mechanically strong material ...
Tapflo
Flow: 0 m³/h - 27 m³/h
Head: 1 m - 20 m
Power: 0.12 kW - 4 kW
CTM MAGNETIC DRIVE PUMPS CTM is a compact close coupled pump perfect for service in little spaces like in OEM installations. Tapflo CTM magnetic drive pumps are centrifugal ...
Tapflo
Flow: 800 m³/h
Head: 22 m
Output diameter: 300 mm
RELONG hydraulic drive submersible slurry pump is a highly efficient and modular heavy-duty submersible dredge pump unit. It’s mainly used as an excavator dredge attachment, which is designed for pumping ...
Relong Tech
Flow: 1,500 m³/h
Head: 35 m
Power: 250 kW
... can be added to the main pump body to help break and mix sludge, and improve the suction concentration of the slurry pump. 4. The submersible dredging pump is easy to install and operate ...
Relong Tech
Flow: 600 m³/h - 1,000 m³/h
Head: 20 m - 65 m
Output diameter: 250, 200 mm
RLSDP dredge pump is a new type of sludge pump researched & manufactured by our company basing on International (Warman) Gravel Pumps, aiming at rivers and seas out of repair. RLDSP dredge ...
Relong Tech
Flow: 0 m³/h - 11 m³/h
Pressure: 0 bar - 16 bar
Head: 47 m - 120 m
... controlled by CM control module. - Multistage pump made of AISI 304 stainless steel. An inverter allows 4HS to: - Change pump speed to maintain set-pressure regardless of water demand. Consequently ...
NASTEC
Flow: 0 m³/h - 18 m³/h
Pressure: 3 bar
Head: 2.5 m
SUND is the Nastec range of solar pumps for the circulation and filtering of pool water. It guarantees: Energy saving thanks to photovoltaic energy supply and variable-speed operation. Quick and simplified installation ...
NASTEC
Flow: 0.5 m³/h - 8 m³/h
Head: 10 m - 60 m
Power: 800 W
... the pumped water. The flow rate is directly proportional to pump speed while the pres-sure supplied is kept almost constant. In this way, unlike a centrifugal pump, the helical rotor ...
NASTEC
Flow: 31 m³/h
Pressure: 8 bar
Head: 62 m
Wide range of pumps for domestic and industrial applications.
LOWARA
submersible pump Spec Usage:Sewage Key Features *CV-series are designed for solid handling submersible pumps, enclosed with vortex impeller with spherical clearance 35mm and 56 mm are ideal for ...
Enfound enterprise co.,ltd
Close-coupled Centrifugal Pump for sea water and hot spring Spec Type:Other Key Features Features: 1. Pump casing and impeller are made of highly reinforced plastic. The shaft ...
Enfound enterprise co.,ltd
Flow: 36 m³/h
Pressure: 5 bar
Head: 25 m
Close-coupled Centrifugal Pump for sea water and hot spring Key Features Features: 1. Pump casing and impeller are made of highly reinforced plastic. The shaft is using SUS316 material. ...
Enfound enterprise co.,ltd
Flow: 30 l/min
Electric pump 12 V, 30 l/min Order-number: 8640 Details Diesel pumps, accessories for UNI- and MULTI-Tank -light and robust construction -also for continuous operation -simple handling due to ...
CEMO
Flow: 35 l/min
Electric pump 230 V, 30 l/min Order-number: 8639 Details NSA diesel pumps, accessories for UNI- and MULTI-Tank -light and robust construction -also for continuous operation -simple handling due ...
CEMO
Flow: 20 l/min
Pressure: 0 bar - 1.1 bar
Power: 220 W
Submersible pump CENTRI SP 30, Pump Set - low-cost entry-level solution - low-wear centrifugal pump - electric motor 12 V, max. 20 A - version with power pack for ...
CEMO
Head: 10 m - 40 m
Power: 0.55 kW - 30 kW
The BAW series assembled by Zhejiang Xingsheng Machinery, is a hygienic centrifugal pump that complies with the food sanitary standards. This machine provides users a simple structure that is attributed ...
Flow: 30 m³/h
... CIP self-priming pump adopts acid-resisting stainless steel (AISI 316) in its valve body. This has a unique resistance to alkali and acid. The positive displacement pump has features which are superior ...
... guarantees the original taste of products. This centrifugal pump series can be utilized for applications in industries such as alcohol, foodstuff, pharmacy, chemical and beverage by delivering liquids ...
Head: 60 mm - 260 mm
Power: 250, 120, 60, 180 W
... ) : 60 • Weight (Kg) : 2 • Packaging (mm) : 25X25X30 • Draught (mm) : 60 The continuos service self-priming electric pumps are suitable for continuos coolant flow and assure absolute operating safety even at high temperatures.
VD Type The DELTA VD fuel unit is an efficient modern oil burner pump with compact design and since its mounting flange, hub and shaft sizes are manufactured to international standards (EN 225), it can ...
... Aqua-Tiger centrifugal pumps are suitable for general pumping applications were a flooded intake is provided. Typical applications include livewell filling and circulation, and any other applications ...
Hypro Pressure Cleaning
This high-powered, self-priming transfer pump achieves up to 200 gpm (757 lpm) and 58 psi (4.0 bar). The series includes 1542P-55SP, 1542P-65SP, 1542P-65ESP, 9342P-HM1C-5SP, and 9342P-HM5C-5SP. Key Features Close-coupled, ...
Hypro Pressure Cleaning
Hypro centrifugal pumps are designed for agricultural and industrial spraying and transfer of a variety of fluids: water, insecticides, herbicides, wettable powders, emulsives, liquid fertilizers, etc. ...
Hypro Pressure Cleaning
Flow: 3,700 us gal/h - 3,800 us gal/h
General Purpose Centrifugal Pumps End Suction Centrifugal Pump The Xylem Rule General Pupose Pump is designed 1-1/2" (38mm) inlet and 1-1/2" (38mm) ...
RULE INDUSTRIES
Flow: 1,200 m³/h
Pressure: 3,600 psi
Head: 200 m
High Capacity Pump This canned motor pump model features high flow capacity at high pressure and temperature. Designed for zero-leakage operation in applications that demand robust and reliable performance. Design ...
Hayward Tyler®
Flow: 0 us gal/min - 178,000 us gal/min
Head: 0'00" ft - 152'00"
Axial Mixed Flow Pumps Vertical, wet pit design pump for Circulating Water Service (including condenser). Specifically designed for the nuclear industry, it features a number of hydraulic designs, and ...
Hayward Tyler®
Flow: 0 us gal/min - 3,000 us gal/min
Head: 0'00" ft - 500'00"
... injection pumps Decay heat pumps (low pressure injection) Reactor spray pumps Class 2 pumps for any other service involving low NPSH or thermal shock applications Auxiliary ...
Hayward Tyler®
Flow: 10 m³/h - 20,000 m³/h
Head: 3 m - 300 m
PRODUCT FEATURES Expect more with the improved design and above standard, standard materials options of the e-XC split-case pump: Xylem's proprietary mechanical seals - carbon/silicon carbide seal with an EPDM elastomer ...
Jabsco
Pressure: 0 bar - 400 bar
The air operated pumps PPFG are designed for centralized lubrication system with grease wherever dynamic distributors are utilized. They may be utilized on large machinery and have numerous lubrication points. It can ...
Flow: 19 l/h
Head: 10 m
Length: 96, 170 mm
Integrated detection unit for installation in tight spaces.
Sauermann
Flow: 0 l/min - 246 l/min
Pressure: 20 bar
Head: 50 m
Standard Bushings-Carbon Graphite Optional Bushings-Alpha Silicon Carbide (Tungsten carbide coated shaft reguired) Optional Tungsten carbide coated shaft Standard NEMA 56C motors Magnet Material-Samarium Cobalt Applications Industry-Chemical ...
Price Pump
Flow: 8 l/min - 135 l/min
Head: 10.5, 11.5, 14.2, 20.3 m
Power: 10 W - 265 W
Corrosion resistant, compact magnetic drive pumps Features of MD-F / MD-V series Superior corrosion resistance Manufactured mainly from superior corrosion-resistant CFRETFE, the pumps ...
IWAKI
Flow: 20,000 m³/h
Head: 0 m - 300 m
Fluid temperature: 80 °C
The ClydeUnion Pumps Uniglide range consists of both configured and engineered to order axially split double suction pumps. Applications Desalination Water treatment, supply and distribution District ...
Celeros
Flow: 2,500 m³/h
Fluid temperature: 80 °C
The ClydeUnion Pumps Duoglide range consists of both configured and engineered-to-order, axially split case, two stage pumps designed for higher head/flow applications. The Duoglide provides higher efficiency ...
Celeros
Flow: 2,800 m³/h
Fluid temperature: 180 °C
... which enables rapid withdrawal of all the pump internals as a cartridge without disturbing pump alignment or pipework. This greatly reduces the time required to maintain the equipment compared to conventional ...
Celeros
Flow: 85 l/min
Head: 19 m
Power: 500 W
... •Suitable for dispensing diesel, heating oil, hydraulic oil, machine oil, engine oil, etc •Pump interior in aluminium •Ready-to-use kit, including a pump, media resistant hose (2 M), nozzle and drum ...
... kinetic energy that comes out from impeller into pressure to force oil circulation. The pump can be a part of the pipe line due to the inlet and outlet of the pump are in the same axis. Therefore, the ...
ERG Technology
Flow: 0 l/min - 5,000 l/min
Head: 0 m - 98 m
Power: 11 kW - 75 kW
... MDW is dimensionally compliant with the international standard (ISO2858, 3661) and is interchangeable with conventional sealed centrifugal pumps.
IWAKI Europe GmbH
Flow: 0 l/min - 4,000 l/min
Head: 0 m - 55 m
Power: 4 kW - 37 kW
... transfer of strong acids and alkalines as well as nearly all chemical solvents. Superior durability The exterior of the pumps is covered with ductile cast iron. Ample pressure resitance has been provided in the rear ...
IWAKI Europe GmbH
Flow: 0 l/min - 1,400 l/min
Head: 13.5 m - 74 m
Power: 1.5 kW - 15 kW
... contact surfaces in the front and rear areas of the pump. Therefore high temperatures are avoided. This greatly improves resistance against dry running in comparison with conventional mag. drive fluororein ...
IWAKI Europe GmbH
Flow: 26 l/min - 34 l/min
Pressure: 140 bar
Length: 36 cm
The TP03 and TP08 lines of trash pumps are a great example of the power of hydraulics when it comes to pumping liquids with solids. The TP03 pump provides 450 gallons per minute (1688 lpm) of discharge ...
Stanley Infrastructure
Flow: 42 m³/h
Power: 2.9 kW
Subaru OHC engine, Automatic low oil shut-off, 3 x hose clips, 2 x hose coupling, 1 x strainer, 1 x spark plug key
Please specify:
Help us improve:
remaining