- Hydraulics - Pneumatics >
- Valve >
- Flap valve >
- Mival
Mival flap valves
DN: 100 mm
The FG Inox sight glass is constructed with the integration of 316 stainless steel materials. Its design also includes a female thread fitting. This assembly measures from DN 15 to 50, and approximates body mass from 900 to 4,000 kg. ...
FG INOX
DN: 80, 46, 60, 32 mm
Pressure: 300 bar - 3,200 bar
Flow rate: 0 l/min - 1,000 l/min
Check valves prevent a reversal of the specified direction of flow and thus a backflow of the delivery medium to be pumped. Special features: VA version, compact design. Throttle check valve for direction-dependent ...
DN: 14.3 mm
Pressure: 241 bar
Temperature: -54 °C - 204 °C
... cartridge style, hydraulic check valve for use as a blocking or load-holding device. Operation The cartridge valve allows flow from port 1 to 2, while normally blocking flow in the opposite direction. ...
HYDRAFORCE
DN: 15 mm - 50 mm
Pressure: 0 bar - 5 bar
Temperature: -20 °C - 80 °C
* Robust Design * Small in Size * Universal Fitting position Housing made out of Brass and strainer made out of Stainless Steel Wire mesh (Max. Mesh Size 100 micron) FLUIDS : Natural Gas, LPG, Town Gas, Oxygen, Air, Other gases on request(Except ...
DN: 0.25 in - 2.5 in
Pressure: 60 bar
Temperature: 150 °C
Characteristics: Valve body machined from solid, no middle connections. The closure area is between the 2 support points of the piston. Documentation: Laser marking for traceability and validation processes. Material ...
RATTIINOX SRL
Pressure: 3 psi - 16 psi
In-line Check Valves - General Information MICO® Residual Check Valves allow free flow of hydraulic system fluid in one direction while maintaining residual fluid pressure from the opposing side. These ...
Pressure: 10,000 psi
Permits flow of hydraulic oil in one direction only. Operation: Installs right in hydraulic line.
SPX Hydraulic Technologies
DN: 0.5 in - 24 in
... FAMAT Check Valves, also referred to as non-return valves, are functionally used to allow certain fluids to flow in a singular direction without having the event of a counter flow. The company also ...
FAMAT
DN: 0.5 in - 2.5 in
Pressure: 10 bar - 100 bar
... elevator control valve, the L10 can be employed as a safety back up valve to the down system of the main control valve to prevent unwanted down movement of the elevator should an electrical ...
DN: 0.5 in - 4 in
True Union Ball Check Valve (1/2"-2") and Single Union Ball Check Valve (3"-4") The Asahi/America ball check valve employs a free moving ball, which unseats to permit flow in one direction, ...
Asahi/America, Inc.
DN: 10 mm - 100 mm
Pressure: 25 bar - 250 bar
Temperature: 350 °C
forged body (lifetime up to 60 years) – non-cobalt overlay Material stainless steel 08Ch18N10T, carbon steel 12 020.1 Connection butt welding ends Operating self-acting
ARAKO spol. s r.o
DN: 2 in - 8 in
Pressure: 8.6 bar - 155 bar
Temperature: -29 °C - 815 °C
Swing check valve, Bolted cover Renewable disc and seat (in S.S. construction, integral seat non renewable) STANDARDS PED Quality Standard MSS SP 55 All wetted component materials meet NACE MR0175 / ISO15156 & NACE ...
DN: 0.25, 0.375, 0.5, 0.75, 1 mm
Pressure: 2,500 psi
Temperature: -15 °C - 400 °C
Spring-loaded, compact, stainless steel check valve. 316 stainless steel Spring-loaded 2 lb. or 10 lb. cracking pressures MNPT x MNPT Usable on metering pumps and injection line applications Suitable for pressures ...
JAECO Fluid Systems
DN: 2 mm - 16 mm
Pressure: 700 bar
Temperature: -40 °C - 80 °C
Our check valves are available as screw-in or case valve models. Both models are available with the screwing-in direction blocked or with the screwing-in direction open for flow. The basic materials used ...
HYTORC-TECHNOLOGIES GMBH
DN: 0.5 in - 42 in
... Bidegain we manufacture non-return valves, also known as a check valves, from the complete kit to the independent components, always ensuring the highest levels of quality and optimal performance. We ...
... vacuum controlled check valve (ARV) is a pneumatically operated on-off valve featuring low pressure loss. To activate this valve, vacuum from the intake manifold is supplied by a solenoid ...
DN: 50 mm - 1,350 mm
Pressure: 0 bar - 10.3 bar
Temperature: 0 °C - 178 °C
Class 125 Cast Iron Sure Check™ Valves Size: 2 to 54 in. (50 to 1350mm) Description: Designed for liquids and gases where flow reversal can cause surge and water hammer. Elastomer seats provide bubble-tight shutoff.
Mueller Steam
DN: 0.25 in - 1.5 in
Pressure: 0 bar - 350 bar
Flow rate: 12 l/min - 310 l/min
The FPR series, manufactured by Dicsa, has a body that has been constructed out of steel. It also has a cracking pressure of 0.5 bar.
Dicsa
DN: 25 mm - 200 mm
Ball check valve (PN 10) Lining-Materials: * PTFE (virgin or conductive) Different lining thicknesses and flange designs on request. Other pressure rates: * PN 16 * PN 25 * PN 40 Material: ...
DN: 0.25 in
Pressure: 50, 110 psi
Temperature: 0 °F - 170 °F
Material: Acetal Copolymer Colors: Blue, Orange, Black, White, Grey Compatibility: Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No: Chlorine, Acids, Ammonium ...
LOCKWOOD
DN: 25 mm - 1,500 mm
Pressure: 16 bar - 420 bar
Temperature: -196 °C - 550 °C
Aluminium Bronze Check Valves Valve Body materials: aluminium bronze Valve Manufacturing standards: API, ANSI, BS, DIN, JIS Valve Connection: wafer, lug, flanged
Pipe Valve Flange Factory Landee
DN: 10 mm - 100 mm
Pressure: 10, 12, 16, 25, 40 bar
Temperature: -20 °C - 100 °C
Full bore check valve, F/F threaded. Temperature range: -20°C +100°C
DN: 1 in - 28 in
Mercury Products manufactures standard raincaps for heavy duty exhaust system protection and single-bolt installation with designs in 1" to 28" diameters. The precision-balanced vane, welded lid and a lubricated metal bushing are combined ...
DN: 15 mm - 100 mm
Pressure: 10 bar - 16 bar
- INOX Material - PVC-U = Unplasticised Polyvinylchloride Gaskets - EPDM Manufacture - Injection moulded Extra informatie - Flow [l/min] at which ∆p is 1 bar, determined according to DIN EN 60534-2-3.
Van de Lande BV
DN: 0.125 in - 0.5 in
Pressure: 2 bar - 10 bar
Temperature: -10 °C - 130 °C
FARBO has a wide range of valves used for the pneumatic circuitry. Besides non-return valves, available both for power circuits that control, also quick exhaust and logical OR type valves. A ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining