Mival spring check valves

DN: 10, 20, 32, 40, 50 mm
Pressure: 50 bar
Temperature: -196 °C - 120 °C

The Type 05411 of cryogenic check valves from Herose has spring and bronze body and cap. The device is cleaned and degreased for oxygen service. It is also equipped with a male thread ...

Pressure: 2,500 Pa
Temperature: 0 °C - 90 °C

CHECK VALVES Size:Spring Check Valve [Technical Specification] Material Normal brass ; CW617N ;DZR Working Pressure PN25 or 2.5Mpa Seal ...

Pressure: 414 bar
Temperature: -184 °C - 232 °C

... specialty valves handle a wide variety of applications. Features and Benefits: Flexible Seal Seat™ for zero leak (bubble-tight) sealing to 6000 PSI O-Ring seal positively secured Non-pressurized ...

Pressure: 450 psi

... air compressor in-tank check valves. One-piece brass bodies, stainless steel springs, and glass-filled fluoropolymer poppets all add up to long term reliability, while the eight discharge ...

DN: 50 mm - 250 mm
Pressure: 16, 10 bar
Temperature: -10 °C - 150 °C

The valves in Series 05 are check valves with cast iron bodies, that are manufactured in accordance with the most severe product norms, and in conformity with the quality requirements ...

Pressure: 2 bar - 8 bar
Temperature: -20 °C - 200 °C

Non-return valves series Areas of application : compressed air Technical features : - working pressure : 2 ÷ 8 bar - opening pressure : 0.5 bar - working temperature : -15°C ÷ 200°C Materials : - body in ...

DN: 0.375 in - 4 in
Pressure: 25, 16, 10 bar
Temperature: -10 °C - 90 °C

Stainless Steel spring NBR seal Female/Female : ISO 228-1

Pressure: 250 bar
Temperature: -40 °C - 120 °C
Flow rate: 20 l/min

... · Industry common cavity · Compact size · Low leakage design Operation Pressure at ① overcomes the spring-bias poppet and allows free flow ① to ②.Flow in the opposite direction,from ② to ...

DN: 50 mm - 900 mm
Pressure: 150 bar - 2,500 bar

Dual Disc Lug Type Check Valve Body Material: Cast Iron, Ductile Iron, Cast Steel, Stainless Steel, Aluminium Bronze Disc: Ductile Iron, Stainless Steel, Aluminium Bronze Spring: ...

DN: 8 mm - 50 mm
Pressure: 63 bar
Temperature: -20 °C - 200 °C

3-pcs. investment cast check valve in stainless steel with spring. Mounting in all directions. FDA

Pressure: 34.5 bar
Temperature: -29 °C - 93 °C

The function of a Check Valve is to allow fluid flow in one direction only. Applications Henry Technologies' Check Valves are suitable for use with HCFC and HFC refrigerants ...

DN: 15 mm - 1,000 mm
Pressure: 10 bar - 40 bar
Temperature: -40 °C - 180 °C

DN: 15 mm - 50 mm

Body Material:UPVC Filter/Screen:UPVC Seal:EPDM Size: DN15(1/2")-DN50(2") Standard: JIS,ANSI,DIN

DN: 15 mm - 100 mm
Pressure: 150 psi
Temperature: 70 °F

The SLC series is a Y-check valves which are manufactured in FPM or EDM forms. It is available in PVC and threaded body version only. And the valves are all arranged ...

DN: 2 in - 12 in
Pressure: 0 bar - 25 bar
Temperature: 0 °C - 180 °C

TECHNICAL INFORMATION1. Wafer check valve (double disk)2. Made of stainless steel CF8M3. Disk made of CF8M4. Axle and spring made of AISI 3165. Seat of viton (FKM) vulcanised in groove6. ...

DN: 0.125, 0.25, 0.375, 0.5 in
Pressure: 0 bar - 0.3 bar
Temperature: -10 °C - 150 °C

One way valve,double seal version, female-female made of stainless steel Body material: Stainless steel (1) Pressure regulator: Stainless steel (2) Spring: Stainless steel (3) spacer: Stainless steel (4) ...

DN: 50 mm - 1,000 mm

Swing Check Valve Gaer® PN16/PN25 The Gaer® swing check valve is used extensively in water pipes. It is also suited for work with wastewater, dirty water or water ...

Pressure: 0 bar - 30 bar
Temperature: 0 °C - 151 °C

The AR sanitary check valves is an ideal solution for preventing reverse flow and cross contamination. They facilitate both horizontal and vertical mounting. It is basically fully drainable sanitary in-line ...

DN: 25 mm - 32 mm
Pressure: 0 psi - 400 psi
Temperature: 0 °C - 80 °C

... Max: 400 PSI Temp Max: 180°F (80°C) Enviro Check® body is cast from an unleaded alloy. Hex shaped for easy wrenching, this valve features a nonspin acetal poppet, NITRILE (Buna-N) seal and stainless steel ...

Pressure: 207 bar

This valve allows free flow from 1 to 2 and blocks flow from 2 to 1.

DN: 350 mm - 600 mm
Pressure: 25 bar
Temperature: -50 °C - 300 °C

Engelsberg BAS 202 Spring Loaded Swing Check Valve Swing check valve for liquid and gas flow. The disk design allows quick shut-off to prevent ...

Temperature: 5 °C - 100 °C

Check valve allows gas and liquid to flow into only one direction and prevent another countercurrent flow valve. Check valve installs the Dry Pump discharge ...

DN: 250 mm

Design Features:Pump Check Valves are specially designed to protect pumps from water hammer, reverse flow and backspin. DeZURIK can provide custom-designed and engineered PEC or PEF Eccentric Plug Valves ...

DN: 2 in - 48 in
Temperature: -267 °C - 537 °C

... (Wafer Style Check Valve) Our industrial grade 304/316 stainless steel swing check valve is designed for a flanged piping system, between two flanges. The valves ...

DN: 25 mm - 50 mm

double union non return valve with spring GRPP or PVDF from 1" to 2'' EPDM or FKM o'ring stainless steel or hastelloy spring PN10