Mival stainless steel filters

Operating pressure: 16 bar
Filtration size: 1 µm - 25 µm

... The P-EG filter housing is designed for replaceable filter elements The steam capacity is from 7,5 kg/h to 14.400 kg/h – and up to a steam pressure of 16 bar. The filter housing ...

... Targeted to H2S removal FCA activated carbon filters are installed for removal of hydrogen sulfide from biogas. The contaminated stream enters at the bottom and flows upwards through the filtering ...

... Principle When the candle filter is start to its filtering process, the slurry is fed into the filter by the pump. The liquid phase in the slurry passes through the ...

... operation, including regeneration and backwashing when integrated to E2REG. Vessel, nozzles and piping in stainless steel AISI 316L. Safety output bag filter to retain eventual carbon ...

Operating pressure: 220, 400 bar
Filtration size: 5, 50 µm
Fluid temperature: -76 °F - 608 °F

... TR CU 010 Seals Material NBR | EPDM | FPM | FVMQ | FFKM Accesories - Wall mounting bracket Spare Parts Kit - O-rings | filter cartridge

... center of the device inside a stainless steel casing where the raw material circulates and whose mission is to attract and retain all the ferrous pollution that circulates freely inside material flow. The ...

Operating pressure: 0 bar - 10 bar
Filtration size: 50 µm - 1,000 µm
Flow: 0 m³/h - 1,000 m³/h

The SCAMDISC Self-cleaning Filters are typically used in petrochemicals, oil & gas, cement and heating circuits. The maximum viscosity is 600 cSt and micron rating ranges from 50 to 1,000 μ. The maximum flowrate is 1,000 ...

Operating pressure: 0.1 bar - 25 bar
Filtration size: 100 µm - 50,000 µm
Flow: 200 m³/h

The self-cleaning automatic filter KAF-S (Bernoulli Filter) is suitable for a variety of uses. It is self-cleaning and maintenance-free filter and is used to remove contamination particles ...

... suitable as a channel filter. The filter tank casing is made of stainless steel (EN1.4404) and wetted parts are IP-67 rated. Low operating costs The fact that the ...

Operating pressure: 10 bar
Filtration size: 1 µm - 1,000 µm
Flow: 160 m³/h

From coarse to fine filtration, IncBio offers a wide range of stainless steel or polypropylene bag filter housings. For almost all areas of solid-liquid separation, our high-quality bag ...

Operating pressure: 0 bar - 6 bar
Fluid temperature: -50 °C - 225 °C

... upstream and downstream support Upstream support with bevelled tube to avoid spashing fluid on borosilicate Stainless steel guard Compressive strength: 3,600 bar Tensile strength: ...

Operating pressure: 14 bar - 207 bar

Series E Screwed & Socketweld 1,500 lb Strainers have screen chambers that won’t leak or crush. Both ends of the chambers are precisely machined. This means perfectly round and smooth seating surfaces, as well as a fixed chamber length. ...

Operating pressure: 40, 35.2 bar

Y type Strainer with BSP threaded ends according to IS07/1 Rp (BS 21). Carbon Steel or stainless Steel construction and stainless Steel screen. Straight ...

Flow: 1,500, 3,000 m³/h

... painted in white for food and pharmaceutical industry also suitable for stainless steel welding smoke extraction or electronic components. True HEPA H14 Filter, electrostatic filter, ...

Operating pressure: 0.5 bar - 6 bar
Filtration size: 50 µm - 800 µm

... 800 micron). Everblue self-cleaning filters filter the water and allow an easy and repetive cleaning of the filtering element. Everblue's range of self-cleaning filters ...

... Turning, Lathes, Machining Centers Specifications The pleated type filter elements provide a good amount of filter area for reasonable life and good contaminant removal. Cartridge Filters ...

Operating pressure: 7 bar
Flow: 75 m³/h - 3,600 m³/h

STANDARD REFERENCE CONDITIONS ISO 7183 • ambient temperature: 25°C • working pressure: 7 bar • Inlet air temperature: 20°C Element are comply with American Food and Drug Administration (FDA) Code of Federal Regulations, title 21, Test ...

... through perforated filter elements made of stainless steel, while contaminants are held back. Solid matter is picked up directly at the bottom of the channel without necessarily requiring ...

Operating pressure: 10 bar

... : with E222 OR C3 d 45 connections, any filtering degree, any material FLOW-RATE: from civil to industrial users, according to the filtering degree requested. MANIFOLD MATERIAL: int/ext polished stainless ...

Filtration size: 125 µm
Flow: 25 l/min - 400 l/min

The HOF HF series is an array of suction filters constructed in stainless-steel mesh grade 125µm reinforced with metal mesh and engineering resin ...

Filtration size: 0.003 µm

New Product Launch: GasPro ™ TEM-2260 High Flow PTFE 316L In-Line Filter GasPro ™ TEM-2260 series filters are specifically designed for the filtration of semiconductor gases when ultra-high flow rates ...

Filtration size: 50 µm - 1,000 µm

... screen filters suitable for all applications and available in a wide rangeof micron sizes, all with the same high quality guarantee of AZUD. RELIABLE FILTRATION in a wide range of filtration degrees (50-1000 micron), ...

Operating pressure: 16 bar
Fluid temperature: -10 °C - 200 °C

The Strainer PN 16, manufactured by Ludemann, is a y-type strainer that features a ISO 7-1 Rp female thread connection, and a drain plug. It is used in applications that involve non-toxic, non-inflammable fluids, gases and vapour. This ...

Flow: 25 m³/h - 150 m³/h
Fluid temperature: 120 °C - 310 °C

... AISI 316L stainless steel. Construction The holders for the respiratory filters of the DFP-2XH ... brand of stainless steel consist of a base and ...

Operating pressure: 0.2 Pa - 2.5 Pa
Filtration size: 25 µm - 300 µm
Flow: 50 m³/h - 6,500 m³/h

Saifilter industrial filter manufacturer can design, manufacture, and market all kinds of wedge wire screens for industrial applications. The basic structure is the welding or annular plate made by stainless ...