NEFF-Gewindetriebe steel nuts

Nominal diameter: 5 mm - 8 mm
Height: 11 mm - 18 mm
Width: 15 mm - 30 mm

The surface quality of the knurled nuts GN 530.5 is of a sufficiently high standard to meet the highest requirements. The flash mark is not visible. Duroplast material is highly resistant to chemicals.

Nominal diameter: 8 mm - 24 mm
Height: 4 mm - 12 mm
Width: 13 mm - 36 mm

Hexagon Thin Nuts with a fine thread ISO 8675 are used in bolted connections, e.g. as lock nuts to lock components and prevent accidental loosening, turning or shifting. In addition, the nuts ...

Blind rivet nut assortment Contents: Each one threaded mandrel M4 and M5 for NTS and NTX. Each 8 blind rivet nuts M4 short and long. Each 8 blind rivet nuts M5 short and long.

Nominal diameter: 8, 5, 6, 4 mm

blind rivet nut G-Sealed Areas of application: G-Sealed can be used in many applications, but is particularly suitable for the automotive industry due to its excellent thermal and chemical resistance. Customer benefits: • ...

Standard Blind rivet nuts Your benefit The specified forces and torques correspond to calculated values or values determined in tests. They aim to help the user select the suitable fastener. GESIPA® recommends testing ...

Toggle Pads (Steel) Steel（S45C） Case hardened(on contact face) Black oxide finish

Nominal diameter: 24, 30, 36, 40 mm
Height: 12, 10, 8, 6 mm

BJ753 / BJ754 Knurled Nuts Material : S45C steel Finish : Black oxide

Nominal diameter: 4 mm - 24 mm
Height: 5 mm - 28 mm

HELICOIL® nuts with integrated HELICOIL® Screwlock ensure secure screw joints. An efficient linking of two fasteners. The nuts comprise a nut body and an integrated HELICOIL® Screwlock ...

Nominal diameter: 8, 10 mm
Height: 20, 40, 30 mm
Width: 55, 70 mm

Threaded zinc plated steel stud. Material Black thermoplastic, glass fiber reinforced, mat.

SEAL LOCK® sealing nuts provide a reliable seal against gas or liquids, even under high pressure. Easy to install, doubly reliable. SEAL LOCK® seals simultaneously inside the thread and below the head. The one-piece ...

... -CLINCHING THREADED NUT Family Self-clinching threaded nuts Type of product Self-clinching nut Receiving material Light Alloy, Stainless Steel, ...

SELF-CLINCHING THREADED NUT Family Self-clinching nuts Type of product Self-clinching nut Receiving material Light Alloy, Stainless Steel, ...

Nominal diameter: 2.5 mm - 20 mm

... HEXAGONAL NUTS Family Self-clinching threaded nuts Type of product Hexagonal self-clinching Nut Receiving material Light Alloy, Stainless Steel, ...

Height: 12 mm - 24 mm
Width: 20 mm - 40 mm

Knurled nuts quick-acting Material: Carbon steel. Version: Tempered and black oxidised. Note: Quick-acting knurled nuts are mainly used in applications where no high clamping pressures ...

T-nuts Material: Steel. Version: galvanized. Note: Universal fastening element. The T-nut is twisted into the profile slot and so can be subsequently inserted into existing systems. ...

Height: 6 mm - 22 mm
Width: 7 mm - 36 mm

Hexagon nuts with polyamide thread lock high type, DIN 982 Material: Steel or stainless steel (A 2) Version: Galvanised steel. Bright stainless steel. Note: When ...

Nominal diameter: 3 mm - 12 mm
Height: 3 mm - 12 mm
Width: 12 mm - 40 mm

Nominal diameter: 5 mm - 12 mm
Height: 12 mm - 24 mm
Width: 20 mm - 40 mm

Steel class 6 nut. Steel C67S cage. Cage nuts, thanks to their fins, can create female threadings on pre-drilled sheet metal, already having square, rectangular or round holes.

Steel class 6 nut. Stainless steel X5 Cr Ni18/10 cage. Cage nuts, thanks to their fins, can create female threadings on pre-drilled sheet metal, already having square, ...

Nominal diameter: 2 mm - 64 mm

Nominal diameter: 3 mm - 20 mm
Height: 8.8 mm - 31.2 mm
Width: 18.5 mm - 66.5 mm

... Standard or according to customer specification Material: Steel non-plated, zinc-plated, nickel-plated acc. to DIN EN ISO 4042, brass non-plated, nickel-plated acc. to DIN EN ISO 4042, stainless steel ...

Nominal diameter: 3 mm - 24 mm
Height: 6 mm - 42 mm
Width: 5.5 mm - 36 mm

... or according to customer specification Material: Steel non-plated, zinc-plated, nickel-plated, brass non-plated, nickel-plated acc. to DIN EN ISO 4042, further finishes on request, stainless steel ...

Nominal diameter: 6 mm - 16 mm
Height: 100 mm - 400 mm

... working loads Channel nuts The following safe working loads apply for BTS channel nuts in steel and stainless steel for strut channels in combination with a threaded ...

Nominal diameter: 6 mm - 30 mm
Height: 45 mm - 109 mm
Width: 45 mm - 108 mm

EYE NUT 8.8 - safety coefficient 4 To be screwed by hand

Nominal diameter: 8 mm - 48 mm
Height: 43.5 mm - 211 mm
Width: 34 mm - 162 mm

Nominal diameter: 3 mm - 20 mm
Height: 8.6 mm - 33.8 mm
Width: 17.6 mm - 68.5 mm

Nominal diameter: 12 mm - 80 mm

The wide range of ball screw flange nuts enables a variety of connection options for a wide range of applications. The ball screw flange nuts are available from stock in accordance with DIN 69051 with ...

Nominal diameter: 16 mm - 63 mm

The wide range of flanged ball nuts allows for a variety of different connectivity options for diverse applications. The flanged ball nuts are available from stock either with a flattened flange for limited ...

Nominal diameter: 16 mm - 63 mm

NEFF cylindrical ball nuts are highly suited for the use in housing bores because of the compact construction and the integrated feather key groove. The design of the series KGM-N in accordance with the NEFF standard ...

Nominal diameter: 6 mm
Height: 25.8 mm - 31.7 mm
Width: 9.8 mm

Split Blind Rivet Nuts "GO-SPLIT" Pre-slotted, Flat Head, Round Shank Slotted, Open Type, Steel Zinc Plated Packaging - Goebel Clamping range min. - 7,1 Length (mm) - 31,7 ø - 9,8

Height: 2, 10, 4 mm
Width: 40 mm - 600 mm

... different types of nuts actuated by grease: • Nuts with transverse or axial nipple and release screw. Nuts are actuated by an external unit (normally a grease pump). • Nuts ...

Nominal diameter: 8 mm - 16 mm
Height: 12 mm - 24 mm
Width: 13 mm - 24 mm

Fixture nuts according to DIN 6330 have a spherical surface to match conical seats DIN 6319 (EH 23050.). With this combination of fixture nut and conical seat, non-parallel clamping surfaces can be ...

Nominal diameter: 8 mm - 16 mm
Height: 9 mm - 24 mm
Width: 13 mm - 24 mm

The collar nuts (flanged nuts) are manufactured accoring to DIN 6331. Material Heat-treated steel, tempered, quality 10, phosphated

Nominal diameter: 8 mm - 16 mm
Height: 24 mm - 48 mm
Width: 13 mm - 24 mm

In comparison to a hexagon nut according to DIN 6330, the extension nuts are elongated and are particularly suitable as a connecting piece for stud bolts. Material Heat-treated steel, ...

Nominal diameter: 2 mm - 8 mm

Materials : steel, stainless steel Surfacing material : wide range [Please contact us for details]

Nominal diameter: 3 mm - 5 mm

Materials : steel, stainless steel Surfacing material : wide range [Please contact us for details]

Nominal diameter: 3 mm - 12 mm
Height: 15 mm - 60 mm

Materials : steel Surfacing material : wide range [Please contact us for details]

Self-clinching rivet nuts from series 10.455 and 10.456 are riveted into the component. A shaft is passed through a pre-punched hole in the component and riveted on the opposite side. The base material is not deformed ...

The self-clinch nut is a threaded fastener that has a knurl and a notch. The knurl ensures while embedding into the metal sheet the displaced material to spread evenly in the notch. This ensures an especially ...

... rivet nut provides a locking device to avoid the turning of the insert in the component. These knurled blind rivet nuts are used preferably in components with lower regidity (component ...

Nominal diameter: 6 mm - 27 mm

HEICO-LOCK®Wedge Lock Nuts The HEICO-LOCK® Wedge Lock Nut is a re-usable one piece design that delivers high quality, user friendly bolt security without the need for seperate fasteners. The captive ...

Nominal diameter: 20, 22 mm

HEICO-LOCK®Wheel Nuts The HEICO-LOCK® Wheel Nut is the reliable solution for the problem of self-loosening of wheel nuts on both roads and rough terrain. The captive and rotary ...

Nominal diameter: 20 mm - 160 mm
Height: 37 mm - 191 mm

HEICO-Tec® Tension Nut Simple · Fast · Reliable For a secure joint with a HEICO-TEC® Tension Nut, no electric, hydraulic, or pneumatic tools are needed. All you need is a torque wrench. The HEICO-TEC® ...

Nominal diameter: 19, 25, 22 mm

... Locking T-Nuts or Pronged Tee Nuts as they are also known, are manufactured from a high performance zinc plated steel, which provides an excellent level of resistance ...

Nominal diameter: 6, 8 mm

Our Furniture Connector Nuts, or Joint Connector Nuts as they are also known, are made from a premium steel alloy, which provides an ideal level of strength and integrity throughout their ...

Nominal diameter: 10 mm - 12 mm

Our Cross Dowel Barrel Nuts or 'B Nuts' for short are manufactured from a high quality Zinc Plated Steel, providing excellent strength and resistance against general ...

Nominal diameter: 18, 22, 26, 32 mm
Height: 13.5, 17, 20.5 mm

Includes spherical nut and spherical washer. Made from alloy steel with a black oxide finish.

Nominal diameter: 2 mm - 5 mm
Height: 1.5 mm - 3 mm
Width: 5.56 mm - 9.53 mm

Self-clinching nuts for pc boards Material: Electro tin plated steel

Nominal diameter: 4, 5, 6, 8 mm
Height: 22 mm
Width: 13.5 mm

T-nut slot 8, for subsequent pivoting into the profile; groove ball keeps the sliding block in position. Material: Stainless steel Zinc plated steel Color: Galvanized Packaging Unit: ...