Flow: 0 m³/h - 11 m³/h
Pressure: 0 bar - 16 bar
Head: 47 m - 120 m
... controlled by CM control module. - Multistage pump made of AISI 304 stainless steel. An inverter allows 4HS to: - Change pump speed to maintain set-pressure regardless of water demand. Consequently ...
Flow: 31 m³/h
Pressure: 8 bar
Head: 62 m
Wide range of pumps for domestic and industrial applications.
LOWARA
KGL series servo screw platen pump realizes precise glue supply and metering of the system based on the technical principle of eccentric screw valve, and is suitable for various single and two-component glues from high ...
... saving and noise reduction Compared with the traditional pneumatic platen pump, the servo screw platen pump can save energy by more than 300%. The servo screw platen pump runs more ...
Flow: 104 m³/h
Head: 36 m
Power: 7,500 W
• PP materials, PVDF • Connections DIN EN ISO 9906 Dry-run safe close coupled sump pump Highest operational safety because of bearing-less design partly suitable for particle loaded fluids Tailor-made mounting plates ...
DIVATEC,SL
Flow: 80 m³/h
Head: 27 m
Power: 180 W - 7,500 W
... seals • Materials PP-GF, PVDF • Height up to 65m • Engine coated corrosive EPOXI paint Type of construction • Horizontal pump with hermetic seal and magnetic coupling, with special bearing pair, suitable for dry ...
DIVATEC,SL
Flow: 1,000 m³/h
Pressure: 16 bar
• PP, PVDF, PTFE materials • For large pumps • PN16 • ISO 2858 / DIN EN 22858 connections • For fluids with solids X-CLASS is the beginning of a new generation of powerful heavy-duty plastic pumps. Based ...
DIVATEC,SL
ALLDOO Micropump | Micro Diaphragm Pumps
... ,12VDC and 24VDC micro diaphragm vacuum pumps,gas pumps,water pumps,self priming liquid pumps and long lasting DC brushless motor micropumps,provides ...
ALLDOO Micropump | Micro Diaphragm Pumps
Flow: 5 l/min
Pressure: -700 mbar - 2,000 mbar
Length: 30 mm
CMP30 vacuum(air,gas) micro pump are well suited for transferring,evacuating and compressing air and neutral or corrosive gases as well as vapors. Technical Features: 1.Uncontaminated ...
ALLDOO Micropump | Micro Diaphragm Pumps
air MAGNETIC DIAPHRAGM pump Spec Type:Aeration Pipe,Areator,Other air pump:air MAGNETIC DIAPHRAGM pump Key Features * Low Noise * High Durability * No Lubrication Necessary * ...
Mohno screw pump Key Features Working Principles: Mohno Pump is a container type pump with a single shaft , turning eccentrically; it is composed of a rotor and a stator. The rotor ...
CEMO
Hand pump 25 l/stroke Order-number: 1452 Details Hand pump, accessories for UNI- and MULTI-Tank, pumps and accessories specially adapted for DWT diesel filling stations -robust ...
CEMO
Steel drum-pump Order-number: 7892 Details Hand pumps for diesel and lubricants -robust construction -no energy source required -low-cost -2” connector -suction tube can be ...
CEMO
Flow: 82, 61 l/min
Head: 9 m - 20 m
Power: 400 W
... drive motor and the pump tube acc. directives ATEX 2014/34/EC are required. The handy and powerful device (5,5 kg) can be used as a drive for the ATEX certified sealless pump tubes made of stainless ...
Dr. Jessberger GmbH
Flow: 55, 71, 87 l/min
Head: 23, 16, 10, 7 m
Power: 450, 250 W
... ventilated universal motor. The lightweight, handy and powerful device can be used as drive for the pump tubes of the laboratory and drum pumps and is useful in this combination for many thin fluid, ...
Dr. Jessberger GmbH
Flow: 82, 61 l/min
Head: 9, 20 m
Power: 460 W
... aggressive vapours of acids and alkalies are present. The standard in the on/off switch integrated low voltage release is intended to prevent an uncontrolled start of the drum pump motor after a power ...
Dr. Jessberger GmbH
Power: 1,400 W
Length: 195 mm
Width: 195 mm
Magnetic pump • Total dimensions L x W x H: 195 x 195 x 355 mm • Power: 1400 W • Alloy capacity: 8 Kg • Maximum PCB dimensions: 160 x 500 mm • Maximum temperature: 300 ° C • Heating time: 1h Pot of ...
HIGH VISCOSITY MATERIAL FEEDING PUMP THIN MEDIUM FEEDING PUMP SANITARY FEEDING PUMP HEAT PRESERVATION SLEEVE DESIGN WATER CLEANING MECHANICAL SEAL AVAILABLE ALMOST HAVE ...
ZHEJIANG XINGSHENG MACHINERY CO.,LTD
Lobe pump is widely used to transfer high viscosity liquid and semi-solid liquid. Lobe pump can transfer sauce, cream,food, cosmetic, pharmaceutical liquid,mayonnaise,syrup,meat paste and so on. Rotor ...
ZHEJIANG XINGSHENG MACHINERY CO.,LTD
Stainless steel pneumatic diaphragm pump Brief introduction The stainless steel pneumatic diaphragm pump uses compressed air as the power source, which can be used in various complex working conditions ...
ZHEJIANG XINGSHENG MACHINERY CO.,LTD
Flow: 35 l/h
Pressure: 903 bar
The “V” Series pump is a range of compact, self-contained, pneumatic metering pumps suitable for injecting a wide variety of chemicals that range from 0.07 gph to 9 gph (0.27 lph to 34 lph) and pressures ...
Williams Milton Roy
Flow: 111.66965, 2, 5 l/h
Pressure: 3,000, 2,500, 1,600 psi
Weight: 12.2, 55.1, 62.1 kg
WILROY Series Hydraulic Diaphragm Pump The WILROY metering pump is a unique blend of Williams and Milton Roy pump technology The WILROY is a pneumatic-hydraulically actuated diaphragm ...
Williams Milton Roy
Flow: 2.8 l/h - 170.3 l/h
Pressure: 5.17 bar - 6.54 bar
Weight: 2.7 kg - 5.2 kg
Low Pressure Diaphragm Pumps The CLD Pneumatic diaphragm metering pump consists of a liquid chamber and an air chamber separated by a diaphragm The CLD is a pneumatic driven low-pressure diaphragm ...
Williams Milton Roy
Head: 60 mm - 260 mm
Power: 250, 120, 60, 180 W
... ) : 60 • Weight (Kg) : 2 • Packaging (mm) : 25X25X30 • Draught (mm) : 60 The continuos service self-priming electric pumps are suitable for continuos coolant flow and assure absolute operating safety even at high temperatures.
Flow: 0.8 l/min - 5 l/min
Fluid temperature: 0 °C - 45 °C
Length: 112 mm
... that the Apex2 personal sampling pump has the power to handle any personal monitoring regime. Optimised at around 2l/min, the flow at which most Occupational Hygiene measurements are made, the Apex2 personal sampling ...
Casella
Flow: 2 l/min
Length: 112 mm
Width: 37 mm
... that the Apex2 personal sampling pump has the power to handle any personal monitoring regime. Optimised at around 2l/min, the flow at which most Occupational Hygiene measurements are made, the Apex2 personal sampling ...
Casella
Flow: 1 l/min - 300,000 l/min
Length: 112 mm
Width: 37 mm
... that the Apex2 personal sampling pump has the power to handle any personal monitoring regime. Optimised at around 2l/min, the flow at which most Occupational Hygiene measurements are made, the Apex2 personal sampling ...
Casella
Pressure: 10 bar
Fluid temperature: 60 °C
Weight: 600, 720 g
A, AD Type Modern and compact oil burners pump, designed to pump fuel from the tank to the burner nozzle, at the required pressure. The A – AD type pump is made of a ...
Elettromeccanica Delta S.p.A.
... centrifugal pumps are suitable for general pumping applications were a flooded intake is provided. Typical applications include livewell filling and circulation, and any other applications that do not require a self-priming ...
Hypro Pressure Cleaning
... explosion-proof environments where electricity cannot be used. These models are equipped with a hydraulic motor-driven, triplex plunger pump; and include an unloader, gauge, and quick disconnect. Select models also include ...
Hypro Pressure Cleaning
... high-powered, self-priming transfer pump achieves up to 200 gpm (757 lpm) and 58 psi (4.0 bar). The series includes 1542P-55SP, 1542P-65SP, 1542P-65ESP, 9342P-HM1C-5SP, and 9342P-HM5C-5SP. Key Features Close-coupled, ...
Hypro Pressure Cleaning
Flow: 1,700 us gal/h - 8,000 us gal/h
Rule your dewatering! Backed by the Rule brand of DC pumps, a brand enjoying over 45 years of operational excellence, the Evacuator series is a new line of high efficiency portable utility pumps. Providing ...
RULE INDUSTRIES
Flow: 1,200 m³/h
Pressure: 3,600 psi
Head: 200 m
High Capacity Pump This canned motor pump model features high flow capacity at high pressure and temperature. Designed for zero-leakage operation in applications that demand robust and reliable performance. Design ...
Hayward Tyler®
Flow: 0 us gal/min - 178,000 us gal/min
Head: 0'00" ft - 152'00"
Axial Mixed Flow Pumps Vertical, wet pit design pump for Circulating Water Service (including condenser). Specifically designed for the nuclear industry, it features a number of hydraulic designs, and ...
Hayward Tyler®
Flow: 0 us gal/min - 3,000 us gal/min
Head: 0'00" ft - 500'00"
... Hayward Tyler End Suction Pumps are ideal for the following applications: Safeguard Pumps ASME Section III Class 2 Seal water injection pumps Decay heat pumps ...
Hayward Tyler®
Flow: 10 m³/h - 20,000 m³/h
Head: 3 m - 300 m
PRODUCT FEATURES Expect more with the improved design and above standard, standard materials options of the e-XC split-case pump: Xylem's proprietary mechanical seals - carbon/silicon carbide seal with an EPDM elastomer ...
Jabsco
Pressure: 275 bar
Ideally suitable for the automatic grease lubrication of all types of industrial machines and as a chassis lubrication pump for trucks, trailers, buses, construction and mechanical handling vehicles. ...
I.L.C. srl
Flow: 15 m³/h - 18 m³/h
... varies depending on the type of auger pump installed. The 7515 up to a maximum grain size of 8 mm conveys up to 15m3/h. With the 2L8 auger pump (up to 12 mm grain size) speeds of up to 18m3/h can be reached.The ...
Flow: 42 l/min - 129 l/min
Pressure: 500, 400, 320 bar
Power: 0 kW - 75 kW
HFA/HFC fluids Non-oily water/clear water Mine water Industrial water Descaling water Neutral fluids with a viscosity of 0.5 – 4.0 mm²/s
Hauhinco
Flow: 201, 167, 266, 221, 278 l/min
Pressure: 160, 210 bar
Power: 0 kW - 75 kW
HFA/HFC fluids Non-oily water/clear water Mine water Industrial water Descaling water Neutral fluids with a viscosity of 0.5 – 4.0 mm²/s
Hauhinco
Flow: 103 l/min - 163 l/min
Pressure: 365, 575, 465 bar
Power: 0 kW - 110 kW
HFA/HFC fluids Non-oily water/clear water Mine water Industrial water Descaling water Neutral fluids with a viscosity of 0.5 – 4.0 mm²/s
Hauhinco
Flow: 0.03 m³/h - 180 m³/h
Pressure: 24 bar
PCM Ecomoineau™ M is the most compact progressing cavity pump (PCP) available on the market today. Its revolutionary design combines the legendary performance and reliability of PCM PCP technology with ...
PCM
Flow: 1 m³/h - 100 m³/h
Pressure: 0 bar - 260 bar
PCM pumps are easy to order, delivered fast, simple to operate and incredibly reliable. PCM Oil & Gas transfer pumps combine the legendary performance and reliability of PCM progressing ...
PCM
Flow: 0 m³/h - 55 m³/h
Pressure: 0 bar - 24 bar
... progressing cavity pump is a culmination of our unrivalled industry expertise and our unwavering commitment to provide the best fluid handling solutions. PCM Moineau™A pumps meet all ...
PCM
Flow: 103 m³/h
Pressure: 34 bar
The enhanced design of Ampco’s patented ZP3 series positive displacement pumps is now leading the industry. It sets the standard for PD circumferential piston pump technology with a simplified yet state-of-the-art ...
... can be carried with the pump at rest or in operation and it can be manual or automatic through automatic actuator driven by 4-20 mA; different BUS; pneumatic. Accuracy within ± 1% within 10-100% of ...
Doseuro S.r.l.
Flow: 44 l/h - 3,569 l/h
Pressure: 40 bar - 250 bar
... be carried with the pump at rest or in operation and it can be manual or automatic through automatic actuator driven by 4-20 mA; different BUS; pneumatic. Accuracy within ± 1% within 10-100% of rated ...
Doseuro S.r.l.
Flow: 44 l/h - 3,569 l/h
Pressure: 50 bar - 250 bar
Positive Return Sandwich Hydraulic Diaphragm Pump SDI Sandwich Hydraulic diaphragm dosing pumps comply with mechanical and performance API 675 standards. Furthermore they comply with ATEX standard, ...
Doseuro S.r.l.
Flow: 0 l/h - 700 l/h
Head: 5.4 m
Power: 115 W
The totally re-designed Sauermann Si-83 Tank Pump represents an in-class breakthrough for condensate removal technology. This revolutionary condensate removal solution has been reimagined from the inside-out to be more ...
Sauermann
Please specify:
Help us improve:
remaining