Parker Stratoflex metal fittings

Discharge bends [KRC] are designed to be coupled to the pump's discharge port or inside plants, in both cases allowing a tight-radius 90° change in direction. They may be flange-flange or flange-thread type, with full free passage. Another ...

COUPLERS The external coupler [DAC-E] consists of two parts: a fixed part for connection to the plant and a movable part connected to the pump by means of an optional threaded connecting pipe. The two parts can be connected and disconnected ...

COUPLERS The bottom coupler with vertical discharge DAC-V is compact and rugged, suitable for installation in small pits. It allows the pump to be connected to the system and easily disconnected for servicing or storage even without ...

Diameter: 1.6, 4.5, 3.2 mm
Operating pressure: 0 psi - 100 psi

Straight 10-32 internal threaded barb fitting. Max Pressure Rating: 100 psig, when used with appropriately sized polyurethane tubing. With a clamp installed, the limiting factor generally becomes the burst pressure ...

Diameter: 1.6, 2.4, 2 mm
Operating pressure: 0 psi - 100 psi

... tubing. Max RPM: This fitting is not designed for applications involving continuous rotation, and is not recommended for over 5 rpm. Please consult factory if your application is over 5 rpm. Materials: 303 Stainless Steel ...

Diameter: 3.2, 1.6, 2.4, 2 mm
Operating pressure: 0 psi - 100 psi

Miniature swivel fitting with 10-32 thread and built-in barb. Designed with ball bearings, to swivel freely 360 degrees in applications with moderate to high cycling. Max Pressure Rating: 100 psig, when used with appropriately ...

Diameter: 40 mm - 150 mm
Operating pressure: 16, 10 bar

HALF COUPLING WITH LOCKING RING - HOSE SHANK WITH COLLAR - NBR GASKET - ALUMINIUM - STAINLESS STEEL 316

Diameter: 10 mm - 32 mm
Operating pressure: 10 bar

HALF EXPRESS COUPLING, MALE BSPP THREADED - STAINLESS STEEL 316 - BRASS Inox 316 - Laiton

Diameter: 8 mm - 50 mm

UNIONS HOSE SHANK CONICAL SEAT - FEMALE HOSE SHANK - STAINLESS STEEL 316L

Diameter: 3 mm - 14 mm
Operating pressure: 1 bar - 10 bar

ORIENTING FLOW REGULATOR FOR VALVE “UNIVERSAL SHORT” The fuction fittings of Aignep have been designed to suit a specific use. With a large variety of materials (brass, stainless steel, technopolymer, aluminium) they ...

Diameter: 4, 8 mm
Operating pressure: -0.99 bar - 20 bar

ORIENTING TEE MALE ADAPTOR (PARALLEL)-CENTRE LEG The 59.000 serie is the lastest development in the Food&Beverage sector. Fittings are certified NSF 169 and conformed to NSF 61 & NSF 372 standards and to the food ...

Diameter: 4 mm - 12 mm
Operating pressure: 1 bar - 10 bar

ORIENTING FLOW REGULATOR FOR CYLINDER “UNIVERSAL SHORT” The fuction fittings of Aignep have been designed to suit a specific use. With a large variety of materials (brass, stainless steel, technopolymer, aluminium) ...

Diameter: 50 mm - 300 mm

... extending, connecting and joining light to medium weight hoses Construction / Material Hose reduction design - made of metal Material of hose reduction - Sheet steel, galvanised Properties Chemical Properties ...

Diameter: 25 mm - 150 mm

... - made of highly abrasion-resistant material Execution of the nozzle - hose threaded connector design, cast on, made of metal, external thread according to DIN ISO 228 Properties Chemical Properties - stainless, ...

Diameter: 6 mm - 62 mm

... C Variant - PG, Metric Metal fitting clip Material - Metal Metal fitting pro Material - Nickel-plated brass Protection class - IP 67 Temperature ...

Operating pressure: 10 bar

Compression fitting for copper, precision steel and stainless steel tubes Compliance - UBA Material - Nickel-plated brass,Coated brass Max. operating temperature drinking water - 95 °C Max. operating ...

Operating pressure: 10 bar

Compression fitting for copper, precision steel and stainless steel tubes Compliance - UBA Material - Nickel-plated brass Max. operating temperature drinking water - 95 °C Max. operating temperature ...

Diameter: 32 mm - 125 mm

90° manifold for direct fitting to the blower/exhauster body.

Diameter: 10 mm - 20 mm

Barbed fittings used to connect the vacuum source to the vacuum tube to guarantee a rigid connection. Material: brass Models : . RVM: Straight Fitting (Male) . RVF: Straight Fitting ...

Diameter: 0.25 in - 1 in
Operating pressure: 0 bar - 1,550 bar

MAXIMATOR fittings and gland assemblies of the 1,550 bar series are designed for simple and safe connection of HP pipes up to a max. pressure of 1,550 bar. All gland assemblies are fit for multiple use. Fittings ...

Galvanised steel clamps for steel down conductors.

Brass clamps for copper lightning protection down conductors.

Clamp for “crow-foot” conductors earthing termination

Adaptation of up to 12° in all directions. Independent return to zero position.

Diameter: 16 mm - 63 mm
Operating pressure: 16 bar

Connections - solvent socket – female thread Certificates - EURASEC Hygienic Certificate, GOST Certificate, Rostehnadzor Permission

Diameter: 0.375 in - 2 in
Operating pressure: 16 bar

Pressure rates - PN16 Connections - solvent socket – female thread Certificates - EURASEC Hygienic Certificate, GOST Certificate, Rostehnadzor Permission

Diameter: 20 mm - 63 mm

... Series of transition fittings with element brass threaded molded in the polypropylene body, suitable to join hydraulic equipment and threaded metal pipes with polyethylene pipes from d 20 up to d 63 mm. The ...

Diameter: 11 mm

The system variacor®, patented internationally, allows, with these two joint-turning, to make flexible and directional all the rigid and semi-rigid pipes, whatever is their natures and applications. Cost saving : no more premature ...

Diameter: 11 mm
Operating pressure: 40 bar

... caused by the rigidity of the flexible, easy washing in places with difficult access. Durable, thanks to mechanical stainless steel components and Aluminium body for food application. Reduce the efforts, increases ...

Diameter: 25 mm - 65 mm
Operating pressure: 25, 40 bar

Passage of water, hydrocarbons, food liquids, in pressure or in vacum, very numerous uses for joins DynaVariacor® which return flexible and dirigible any types of flexible or rigid pipes. Less effort due to hose rigidity, make easier ...

... connections between female mouthpieces. Threads: - BSP TAPER BS 21 - NPT (ANSI B1.20.1) Materials: - Mild steel zinc plated - Stainless steel

Diameter: 3.2 mm - 17.5 mm
Operating pressure: 0 bar - 1,400 bar

MCS® High-Pressure fittings were conceived due to the need of offering an extremely reliable product to the high pressure industry. They are made with cold worked AISI 316L and are available in NPT versions up to 1035 ...

Diameter: 1.6 mm - 11.5 mm
Operating pressure: 0 bar - 7,000 bar

MCS® High-Pressure fittings were conceived due to the need of offering an extremely reliable product to the high pressure industry. They are made with cold worked AISI 316L and are available in NPT versions up to 1035 ...

Compression fittings are used for connecting metal tubes useful for high and low temperature applications ad compatibility with aggressive fluids these can be seen in systems varying from gas lines in ...

... also for customers that take standard fitting and weld or thread non standard sizes on one end or make a custom fitting while embedding an RTD or thermocouple at the same time. Whether you are welding ...

... also for customers that take standard fitting and weld or thread non standard sizes on one end or make a custom fitting while embedding an RTD or thermocouple at the same time. Whether you are welding ...

Operating pressure: 25, 80, 200, 250, 390 bar

... are available in 1/2”, 3/4” and 1” and many thread types, so they can connect any combination of threads and pipes . The fittings are suitable for low and high pressure work. Compatible with plastic garden connector.

NITO Fitting - NITO stainless steel fluid quick couplings are suitable for food contact and are used in the pharmaceutical, food, cosmetic and chemical industries. Stainless steel fittings ...

NITO high pressure quick coupling Optimal solution for high pressure cleaners and fixed installations. NITO high pressure fittings are manufactured from materials with an exceptionally strong and secure locking mechanism ...

Diameter: 3, 10, 2, 1.8, 6 mm
Operating pressure: -0.1 MPa - 1 MPa

Mini-type fitting is 40% smaller than the standard type fitting. Even the ultra-small size, tube can be easily connected or disconnected. The elliptical, ultra-small release ring is employed. Easy ...

Diameter: 3 mm - 6 mm
Operating pressure: -0.1 MPa - 0.5 MPa

Barb joint best suitable for space-saving piping. They are optimal for piping vacuum equipment. (Use with vacuum tube.) As for compression type, tube can be tightening by hands. Clean-room Package, best suitable for compact piping ...

Diameter: 3 mm - 12 mm
Operating pressure: -0.1 MPa - 0.6 MPa

Tube Fitting EG type adopts antistatic resin material. Best suitable for the environment dislikes static electricity. For price options, please contact our distributor near your office. https://www.pisco.co.jp/en/company/network/

Diameter: 2, 2.5, 3, 4 in
Operating pressure: 40 bar

Swivel joint – direct-flangeswivel Product characteristics steel (42CrMo4) or stainless steel (1.4571) PTFE-Compound-seal built-in ball guiding tracks similar to ball bearings swiveling, rotating ...

Diameter: 2 in - 32 in
Operating pressure: 40 bar

Swivel joint – direct-flangeswivel, Product characteristics steel (42CrMo4) or stainless steel (1.4571) PTFE-Compound-seal built-in ball guiding tracks similar to ball bearings swiveling, rotating ...

Diameter: 0.25 in - 2 in
Operating pressure: 350, 100 psi

... heavy version with thread connections, nominal diameters G1/4″ – G2″ Product characteristics steel (42CrMo4) or stainless steel (1.4571) PTFE-Compound-seal built-in ball guiding tracks similar to ball ...