Best value screw fastened flange mount MK04 Series Reed Sensor in a rectangular housing with cable terminals. Used in position, proximity, motion, level, and end limit sensing. Optional internal switch, ...
StandexMeder Electronics GmbH
Panel mount (5.75mm) MK03 Series Reed Sensor are supplied in a cylindrically shaped housing with cable terminals. Optional internal switch, cable, length, and termination. UL Approval. Specifications Contact Form ...
StandexMeder Electronics GmbH
M6, M8, M10 and M12 adjustable thread mount MK11 Brass Series Reed Sensor are supplied in a cylindrically shaped housing with cable terminals with optional high voltage switch. Used in position, level, and end limit detection ...
StandexMeder Electronics GmbH
Length: 78 mm
Measuring range: 1 mm - 15 mm
Our inductive proximity sensors are available in Ø 3 mm to M30 models as well as rectangular designs from miniature up to 40 x 40 mm. Fully metallic versions, pressure-resistant sensors ...
di-soric
Measuring range: 0 mm - 10 mm
... capacitor is influenced by the distance of its electrodes. This correlation can be used for the distance measurement. The sensor heads measure without contact and with an extremely high resolution the distance to conductive ...
Length: 60 mm
Width: 12 mm
Measuring range: 0 mm - 6 mm
sensor capacitive, Connector M12 3pin, IP67, V2A, LED, Manual adjustment including 2x Nut, 1x Screwdriver Description Capacitive sensors - Norm switching distance Capacitive proximity ...
ipf electronic gmbh
Measuring range: 8 mm - 30 mm
Process temperature: -20 °C - 70 °C
Detection of ferrous metal objects by inductive principle Ø8, Ø12, Ø18 or Ø30 mm models DC 2-wire or 3-wire Non-flush LED status indicator Non-contact measurement of ferrous metal objects by inductive principle; DC 2-wire or 3-wire; ...
ATEK SENSOR TECHNOLOGIE
Measuring range: 2 m - 3.5 m
... approach area detects a person or object, the sensor will activate the door and turn on the Look back(Blue zone) which detects through the threshold. As long as someone is in the detection area, the sensor ...
OPTEX Entrance
Measuring range: 0.8 mm - 15 mm
... Integrated error display Inductive Sensors with increased switching distances are distinguished by rugged design, easy installation and reliable measured values. The large range makes additional types of sensor ...
wenglor sensoric GmbH
Measuring range: 0 mm - 6 mm
Process temperature: -15 °C - 50 °C
... detection of rotational speed 2-wire multi-voltage technology or 10-30 VDC NPN/PNP Detects up to 6mm Category: Inductive Sensors Electronics Application: Bucket Elevator, Belt Conveyor, Chain Conveyor, Screw Conveyor
4B Braime Components
... not available from our range, we will offer the current Synatel product. Product Features • - A 12mm dc inductive proximity sensor • - Ideal for general use, such as target detection on rotating/reciprocating ...
4B Braime Components
Measuring range: 6 mm - 12 mm
Process temperature: -10 °C - 70 °C
The P800 Proxswitch is an inductive sensor designed to detect shaft speed, shaft position, gate position, or object presence. Product Features • - Detects the presence of metallic objects in hazardous areas such as ...
4B Braime Components
Magnetically actuated proximity switches for providing volt-free changeover contacts allowing the switches to be wired either normally open or normally closed. The switch indicates at a local and/or ...
Measuring range: 0.2 mm - 4.2 mm
... setting and calibrationnts The PPT "Eagle" family is a new generation of smart proximity probes used for non-contact measurement of vibration and shaft position. The sensor is designed with integrated ...
Measuring range: 0.2 mm - 6.4 mm
The CPP-xxx Capacitive Proximity Probe, engineered by MC-monitoring SA, represents a significant advancement in non-contact measurement technology. Designed to cater to a wide range of industrial applications, this probe ...
Measuring range: 6 cm
Inductive proximity switch is a kind of detection element. Through different physical principles, it makes non-contact induction on ferromagnetic metal objects, so as to detect whether the detected object ...
Sentinel Electronics
Measuring range: 8 cm
Inductive proximity switch is a kind of detection element. Through different physical principles, it makes non-contact induction on ferromagnetic metal objects, so as to detect whether the detected object ...
Sentinel Electronics
Measuring range: 10 cm
Inductive proximity switch is a kind of detection element. Through different physical principles, it makes non-contact induction on ferromagnetic metal objects, so as to detect whether the detected object ...
Sentinel Electronics
The IH standard series of inductive proximity sensors are capable of providing sensing operations for temperatures up to 180 °C. They are available as flush or non-flush, and are powered with 10 - 35 ...
The MHM by Delta consists of magnetic proximity switches. The MHM sensors are manufactured to detect any variation in the magnetic field, and are useful in combination with a magnet. They can detect ...
Length: 33 mm
Width: 15 mm
Process temperature: -20 °C - 70 °C
• Contact: N.O. - N.C. • Assembly: on rear side, with screw, with bracket • Casing material: Polyamide • Magnetic switches
PONY SRL
Length: 33 mm
Width: 13 mm
Measuring range: 14 mm
• Dimensions: 33x13x8mm • Operating temperature: -20+70 °C • Contact: N.O. - N.C. • Mounting: from above, with bracket • Body material: Polyamide • Center of sensitive area: reed, T = 14 mm
PONY SRL
Length: 38 mm
Width: 11 mm
Measuring range: 14 mm
• Dimensions: 38x11x8 mm • Contact: N.O. - N.C. - SWITCH • Assembly: on rear side, with bracket • Casing material: Polyamide • Centre of the sensitive area: reed, T = 14 mm
PONY SRL
Process temperature: 0 °C - 70 °C
• Dimensions: M4 x 22 mm • Switching function normally open (NO) • Connection: free cable end Electrical properties Operating voltage 10 … 30 VDC Maximal current consumption 10 mA Load current 200 mA Dynamical properties Frequency 3 ...
• Dimensions: ø 6.5 x 60 mm • Switching function normally open (NO)
Measuring range: 10 mm
The MPS4432SN, manufactured by Comus, is a magnetic and reed proximity switch which features a contact resistance of about 200mOhms. This device is developed with a switching voltage of 220V AC having ...
The Comus Group
Measuring range: 30 mm
Process temperature: -20 °C - 90 °C
The PSA 240/30 is a magnetic reed proximity switch manufactured by Comus Group. It offers a maximum switching voltage and maximum switching current of 400V AC and 0.50A, respectively. Moreover, its maximum ...
The Comus Group
Length: 90 mm
Measuring range: 15 mm
Process temperature: -20 °C - 85 °C
The PTA 1500/30 is a magnetic reed proximity switch, manufactured by The Comus Group. It features a maximum 80 m'ohms contact resistance. It can operate with a 1500V AC switching voltage and 3.0A switching current. The ...
The Comus Group
Measuring range: 5 mm - 30 mm
Features: • High performance inductive sensor ASIC • Adjustable sensitivity with LED display • Adjustable on delay, off delay , one shot time • Build in 100ms Power On Delay eliminate false trigger when power up • ...
Measuring range: 5, 10, 18, 30 mm
Inductive ring sensor senses the change of inductance when metallic objects pass through the ring. IMS sensors have four kinds of sizes to meet different applications. They are especially designed for ...
The CH3 3011 and CHB 3013 Series manufactured by PCH are types of cables and mounting hard wares or displacement transducers. These devices functions to control the movement and vibration of the machines. It is applicable for a wide ...
Measuring range: 0.5 mm - 2.5 mm
Proximity no contact sensor The T-NC/8-API transducer measures the distance of a ferrous material from the sensor head. The non-contact type measurement can be both dynamic for ...
Measuring range: 0 mm - 10 mm
Process temperature: -20 °C - 60 °C
The high temperature sensors should be considered as part of the traditional range of sensors with the difference that electronic portion is completly separate from the sensing part which is in the form ...
AECO
Measuring range: 0 mm - 25 mm
Process temperature: -20 °C - 70 °C
... protection housing simplifies the sensor replacement in case of malfunction and protects it from abrasion caused by material sliding inside the tank. This can be used combined with our ATEX approved capacitive sensors ...
AECO
Measuring range: 0 mm - 25 mm
Process temperature: -20 °C - 70 °C
... factories. The electrical specifications include 3 and 4-wire, amplified direct current sensors and 2-wire, amplified alternating current sensors. The capacitive proximity sensors ...
AECO
Length: 25, 20 mm
Measuring range: 1.5, 2.5, 0.8 mm
Process temperature: -20 °C - 60 °C
... 2-6 Safety parameters: • Vi max: 13,5 V • Ii max: 60 mA • Ci max: 100 nF • Li max: 100 μH • Pi max: 200 mW These sensors must be used in conjunction with associated apparatus (See Sect. E) Use in hazardous ...
BDC ELECTRONIC S.r.l.
Length: 30, 50 mm
Measuring range: 5, 4, 2, 8 mm
Process temperature: -20 °C - 60 °C
... 2-6 Safety parameters: • Vi max: 13,5 V • Ii max: 60 mA • Ci max: 100 nF • Li max: 100 μH • Pi max: 200 mW These sensors must be used in conjunction with associated apparatus (See Sect. E) Use in hazardous ...
BDC ELECTRONIC S.r.l.
Length: 35, 55 mm
Measuring range: 20, 15, 10 mm
Process temperature: -20 °C - 60 °C
... 2-6 Safety parameters: • Vi max: 13,5 V • Ii max: 60 mA • Ci max: 100 nF • Li max: 100 μH • Pi max: 200 mW These sensors must be used in conjunction with associated apparatus (See Sect. E) Use in hazardous ...
BDC ELECTRONIC S.r.l.
Length: 22 mm
Measuring range: 0.6, 1 mm
Process temperature: -25 °C - 70 °C
Miniaturized inductive sensors, diameter ø3 mm. Where small spaces required small dimensions. • Output current: 100 mA • ASIC inside: high reliability and repeatibility • IP67 protection degree • Totally protected ...
DATASENSING
Elen proximity sensors for translating shafts have been designed to meet the application needs of manufacturers of mechanical and hydraulic subsystems for industrial, agricultural and transport vehicles. ...
Process temperature: -40 °C - 120 °C
Proximity sensors for hydraulic cylinders are aimed at manufacturers of vehicles or steering axles to detect the alignment of the wheels to the vehicle axis. Metallic magneto-resistive solutions are available ...
Process temperature: -25 °C - 70 °C
Inductive proximity sensors detect the presence or absence of ferromagnetic metal masses within a limited operating range, without contact and with high accuracy. They are also suitable for use in harsh ...
Measuring range: 1.5 mm - 40 mm
... in particular. Unlike these, conventional proximity switches with maximum operating frequencies of 200 Hz to 2 kHz are comparably slow. Apart from the high maximum possible operating frequencies these ...
KLASCHKA Industrieelektronik
Measuring range: 1.5 mm - 40 mm
... the switch. The proximity switches of the Series All Metal Automative made by KLASCHKA have an ironless coil in connection with an ironless housing. The housings are Teflon-coated, the sensing faces are ...
KLASCHKA Industrieelektronik
Measuring range: 0.8 mm - 70 mm
The series ferrous 3- and 4-pole comprises the „orthodox" Inductive Proximity Switches, which have been developed in the last decades under consideration of the special requirements of our customers. This series is standardized ...
KLASCHKA Industrieelektronik
Measuring range: 0.2 m - 6 m
Product properties - Non-contact distance metering - Analogue or switch output - Narrow 5° beam angle - Fully temperature compensated - Metal or PP body - Magnet or cable programming - Short circuit and reverse ...
Please specify:
Help us improve:
remaining