- Robotics - Automation - Industrial IT >
- Automation >
- I/O module >
- Phoenix Contact
Phoenix Contact I/O modules
Cost-optimized CANopen-slave-I/O module for the extension of the inputs/outputs of a master control unit via CAN. The communication of the master control unit takes place via CANopen or a layer 2 protocol. The ESX.iox ...
(STW) Sensor-Technik Wiedemann GmbH
The ESX.3ios is a CAN-I/O module for the extension of the inputs/outputs of a master control unit via CAN. The communication with the master control unit takes place via CANopen, CANopen Safety, the STW ...
(STW) Sensor-Technik Wiedemann GmbH
... bridge, and one digital output are supplied via a safety relay (max. 15 A per safety relay). The module also possesses four multifunction inputs, one module identification output, one digital output and ...
(STW) Sensor-Technik Wiedemann GmbH
The Fieldbus technology is suitable with Schlegel control units particularly for operations utilizing a big number of control units and pilot lights to be connected to the fieldbus with little wiring. The choice to network the Schlegel ...
... digital I/O and counter operation, and is designed with a heavy-duty chassis for rugged DAQ applications. The USB-DIO24, -1024, and -DIO96H Series are digital I/O data acquisition ...
Measurement Computing
... distances of up to 10km for the 805U and 20 miles for the 905U are achievable. • Point-to-point digital and/or analogue I/O transfer • Easy to use - no configuration necessary • Secure data encryption • Intelligent ...
MTL INSTRUMENT
MI8O2 - Input/Output units * 8 digital inputs * 2 inputs for Start/Restart interlock and external device monitoring (EDM) * 2 pairs OSSD safety outputs (PNP 400 mA) * 2 status outputs (PNP 100 mA) * 4 test outputs MI8O4 - Input/Output ...
... points are short-circuit proof and completely isolated from the CANbus. P317 modules may be mixed on the same bus, with other types in the Trio CAN I/O range. The Trio CANbus I/O expansion ...
Trio Motion Technology
... The ONC with LonWorks slave module FC3A-SX5LS1 and SX5LS conforms to LonWorks specifications Modules can be slave stations in LonWorks network consisting of Lonworks compliant products The ...
GF 30% Polyamid 8(12)-32 VDC 1S Li-on Battery -40C +80C 1x IMU Sensor Up to 1 Frequency Input Up to 4 Current Inputs Up to 4 Resistive Inputs Up to 4 High-Side Outputs Up to 4 Low-Side Outputs Up to 1 Analog Output Up to 2 ...
Makersan
GF 30% Polyamid 8(12)-32 VDC 1S Li-on Battery -40C +80C 1x IMU Sensor Up to 1 Frequency Input Up to 4 Current Inputs Up to 4 Resistive Inputs Up to 4 High-Side Outputs Up to 4 Low-Side Outputs Up to 1 Analog Output Up to 2 ...
Makersan
GF 30% Polyamid 5(9)-12 VDC -40C +80C 1S Li-on Battery Up to 1 Frequency Input Up to 4 Current Inputs Up to 4 Resistive Inputs Up to 4 High-Side Outputs Up to 4 Low-Side Outputs Up to 1 Analog Output Up to 2 Solid State Relays
Makersan
Expansion connector: 2 PCIe x1 Interface: PCIe x1 gold finger/ PCIe connector (36 pin) (opt.) Security: Security-ROM, Intrusion detection (8 doors) Voltage watcher: Voltage monitoring and warning via MCU
DFI
Port: 1 RJ45/2 RJ45 Interface: PCIe x1 Form Factor: M.2 B-M key 22mm x 42mm (0.87" x 1.65")
DFI
Port: 1 RJ45/2 RJ45 Interface: PCIe x1 Form Factor: M.2 B-M key 22mm x 42mm (0.87" x 1.65")
DFI
... , and thermo-sensor modules. • Specifically designed for use with IMO i3 and XGB PLC • Analogue and digital I/O modules • Up to 16-bit resolution • Configurable inputs inc. DC Voltage, ...
... , and thermo-sensor modules. • Specifically designed for use with IMO i3 and XGB PLC • Analogue and digital I/O modules • Up to 16-bit resolution • Configurable inputs inc. DC Voltage, ...
... thermo-sensor modules. • Specifically designed for use with IMO i3 and XGB PLC • Analogue and digital I/O modules • Up to 16-bit resolution • Configurable inputs inc. DC Voltage, ...
>16DI/DO configurable >Support: Profinet, Ethernet/IP, EtherCAT, CC Link IEF Basic protocol fieldbus interface >Protection class: IP 67 (when correctly connected) >Shell material: Nickel plated Gd Zn alloy
Fuyansheng Electronic (Fujian) Co., Ltd.
>16DI/DO configurable >Support: Profinet, Ethernet/IP, EtherCAT, CC Link IEF Basic protocol fieldbus interface >Protection class: IP 67 (when correctly connected) >Shell material: Nickel plated Gd Zn alloy
Fuyansheng Electronic (Fujian) Co., Ltd.
> 16DO >Support: Profinet, Ethernet/IP, EtherCAT, CC Link IEF Basic protocol fieldbus interface >Protection class: IP 67 (when correctly connected) >Shell material: Nickel plated Gd Zn alloy
Fuyansheng Electronic (Fujian) Co., Ltd.
... programmable Rresistor module NXI-5100 supports LAN bus control. Its optional range of resistance is 0Ω~11.11MΩ. Resistance accuracy can be up to 0.1%. For different applications, the flexible design architecture supports ...
... the modules in parallel, to provide a more efficient and flexible installation. ■ Main features: - Modules expanding limit up to 31 units. - Multi-module power supply: when several ...
... the modules in parallel, to provide a more efficient and flexible installation. ■ Main features: - Modules expanding limit up to 31 units. - Multi-module power supply: when several ...
... the modules in parallel, to provide a more efficient and flexible installation. ■ Main features: - Modules expanding limit up to 31 units. - Multi-module power supply: when several ...
... Full population of discrete cards yields 64 I/O in 2 RU (rack units); full population of analog input cards yields 32 analog inputs. See Figure 1 below for front indications and rear connections on Orion I/O. 16-point ...
The Ethernet system with 16 digital I/O MSX-E1516 has 16 digital inputs/outputs with status LEDs, 24 V, and 1 digital 24 V trigger input. The inputs and outputs can be parameterised as paris of inputs our outputs and ...
... acquisition runs Inputs for strain gauges 1 counter input 4 inputs for strain gauges, diff, 24-bit 2 digital I/O, 24V Easy configuration : Easy mode
The Ethernet system for pressure measurement MSX-E3311 has 16/8 differential inputs, 24 bit, for the connection of straing gauges and a digital trigger input, 24 V. Up to 8 channels can be acquired simultaneously. The system was developped ...
... to 76,800 bit/s. The I/O modules are optimally designed for interaction with the BACnet router UBR-01 | Mk II. By using the router, the modules can then be connected to IT networks. Technical ...
... to 76,800 bit/s. The I/O modules are optimally designed for interaction with the BACnet router UBR-01 | Mk II. By using the router, the modules can then be connected to IT networks. Technical ...
The slide-in module for analogue input is designed to record voltages of -10 to +10 V and current signals of 0/4 to 20 mA. Laboratory apparatus, such as thermostats, mixers or measuring sensors, can be connected to the ...
HiTec Zang GmbH
This slide-in module controls laboratory apparatus with analogue voltage or current inputs for control and regulation purposes. The module uses four 6-pin Tuchel sockets according to NAMUR standard ...
HiTec Zang GmbH
This module enables up to 4 Pt100 temperature sensors to be connected. Due to the four-wire technology the length of the wire has no effect on the accuracy of measurement. The resolution is greater than 0.01 °C. The ...
HiTec Zang GmbH
... range of input and output options including 6 digital inputs, 2 digital outputs making it suitable for a variety of remote I/O applications. Automatic Data Collection You don't need to do much to collect data. Internal ...
The module MR-SM3 is a smart meter component for building automation. Current, voltage, power and many other values can be captured by three 230 Volt current circuits. In addition, the device provides monitoring functions ...
METZ CONNECT
The Modbus module MR-Multi I/0 is a compact and rapidly to install solution to connect digital and analog signals from the actor and sensor level directly to a control unit in building automation via Modbus RTU protocol. ...
METZ CONNECT
The Modbus module with 4 digital inputs and 2 relay outputs with manual control was developed for decentralized switching tasks. It is suitable for accommodating, for example, light switches and window contacts in a room, ...
METZ CONNECT
ASi Digital I/O Module in IP20, 22,5 mm x 50 mm, with 4 x 4 contacts, 4 digital inputs, 4 digital outputs, input voltage/sensor supply out of ASi, output voltage/actuator supply out of ASi, periphery ...
Bihl+Wiedemann GmbH
• supply voltage 24V= • 4 outputs SPNO 230V-= max. 5A or transistor (PNP) 24V= max. 800mA or photomos max. 2A • LED indicators for inputs and outputs • 1 potentiometer supply voltage 24V= ±10% power consumption 0,5W ...
... is an I/O module with 4 digital inputs for dry contact (max 30 Hz) and 4 digital SPDT relay outputs type NC C NO with capacity 12 A @ 250 VAC, 12 A @ 24 VDC and maximum peak current up to 100 A. It ...
... As an IIoT I/O module, ATOP’s IO5202 Series is a compact solution for connecting digital and analog devices and sensors, enabling you to monitor, acquire and process data from remote ...
... other devices. PD 802 is used with the BM 103 base module that provides the power supply connection and connection for all the communication interfaces. The device can be fixed to the base module ...
PROCES-DATA A/S
... 50155 qualified input / output modules make it possible to build complete train control control (TCMS) architectures. These acquisition and control modules are based on a generic platform: the “Basic ...
LEROY AUTOMATION
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining