{{product.productLabel}} {{product.model}}
{{#if product.featureValues}}{{product.productPrice.formattedPrice}} {{#if product.productPrice.priceType === "PRICE_RANGE" }} - {{product.productPrice.formattedPriceMax}} {{/if}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{product.productLabel}} {{product.model}}
{{#if product.featureValues}}{{product.productPrice.formattedPrice}} {{#if product.productPrice.priceType === "PRICE_RANGE" }} - {{product.productPrice.formattedPriceMax}} {{/if}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Orifice diameter: 1.3 in - 4.3 in
Pressure: 0.5 bar - 10 bar
... GZS air steam flat fan tip is ideal for gas application. They are widely used in drying processes, water removal from surfaces, flocks and water blow off. ...
PNR Italia
Orifice diameter: 1.6 mm - 20.6 mm
Flow: 1.96 l/min - 1,589 l/min
Pressure: 0.5 bar - 10 bar
... BE BG full cone nozzle has a two-piece design producing a full cone round spray pattern with angles ranging between 70° and 120° and capacities from 4.8 and 1.040 l/min. Their X-vane ensures uniform spray distribution ...
PNR Italia
Orifice diameter: 1.6 mm - 20.6 mm
Flow: 1.96 l/min - 1,589 l/min
Pressure: 0.5 bar - 10 bar
... BE BG full cone nozzle has a two-piece design producing a full cone round spray pattern with angles ranging between 70° and 120° and capacities from 4.8 and 1.040 l/min. Their X-vane ensures uniform spray distribution ...
PNR Italia
Orifice diameter: 1.3 mm - 17.5 mm
Flow: 1.3 l/min - 7,668 l/min
Pressure: 0.7 bar - 10 bar
... aligned with the grooves of the nozzle orifice and the offset angle is between 10° and 15° depending on working pressure and distance from the impact surface. Therefore, utmost attention must be paid during the nozzles ...
PNR Italia
Orifice diameter: 1.3 mm - 17.5 mm
Flow: 1.3 l/min - 7,668 l/min
Pressure: 0.7 bar - 10 bar
... aligned with the grooves of the nozzle orifice and the offset angle is between 10° and 15° depending on working pressure and distance from the impact surface. Therefore, utmost attention must be paid during the nozzles ...
PNR Italia
Orifice diameter: 0.5 mm - 5 mm
Flow: 0.74 l/min - 447 l/min
Pressure: 0.7 bar - 10 bar
... CAS full cone nozzle has seven orifices, large spray capacities and produces very fine droplets using hydraulic pressure only. As the droplets size, among other factors, also depends on the nozzle size, these multi-orifice ...
PNR Italia
Orifice diameter: 2 mm - 45 mm
Flow: 0.5 l/min - 1,105 l/min
Pressure: 0.3 bar - 10 bar
... PA PB hollow cone nozzle generates a hollow cone spray pattern of finely atomized droplets and works on the tangential flow principle. They are designed with a tangential method of atomization. Inside these nozzles there ...
PNR Italia
Orifice diameter: 2 mm - 12.7 mm
Flow: 0.39 l/min - 115 l/min
Pressure: 0.5 bar - 10 bar
... PE PF PT hollow cone nozzle generates a ring-shaped spray pattern with finely atomized droplets and works on the tangential flow principle. Inside these nozzles there is an axial groove that injects the liquid tangentially ...
PNR Italia
Orifice diameter: 1 mm - 16.5 mm
Flow: 0.32 l/min - 172 l/min
Pressure: 0.5 bar - 10 bar
... PE PF PT hollow cone nozzle generates a ring-shaped spray pattern with finely atomized droplets and works on the tangential flow principle. Inside these nozzles there is an axial groove that injects the liquid tangentially ...
PNR Italia
Orifice diameter: 1.6 mm - 13.1 mm
Flow: 0.32 l/min - 85.8 l/min
Pressure: 0.5 bar - 10 bar
... PE PF PT hollow cone nozzle generates a ring-shaped spray pattern with finely atomized droplets and works on the tangential flow principle. Inside these nozzles there is an axial groove that injects the liquid tangentially ...
PNR Italia